Search results for "Surfaces"
showing 10 items of 2837 documents
The modelling of the cathode sheath of an electrical arc in vacuum
2003
This paper presents a simple model of the fragment in the cathode electrical arc root taking into account the physical phenomena occuring on the cathode surface and the sheath. The goal is the obtainment of characteristics values of the heat flux, the electrons, and atoms density in the sheath. Computation is carried out on a one-dimensional model with a coupling between the equation obtained in the sheath and an enthalpy model of the cathode to describe the temperature evolution. In the modelling, we introduce a friction zone above the sheath edge to characterize the heavy particle interactions. Numerical simulation shows that the ionic friction phenomenon deriving from ion–atom collision …
Specific separation and recovery of phosphate anions by a novel NiFe-LDH/rGO hybrid film based on electroactivity-variable valence
2022
Phosphorus is a non-renewable resource. Supplies are limited and much phosphorus is currently wasted during the production and utilization process, causing concerns about future supplies and widespread environmental problems. To solve these problems, a new type of NiFe-LDH/rGO electrically switched ion-selective (ESIX) film is designed, based on the dominant mechanism of inner-sphere complexation. An ESIX process allows the NiFe-LDH/rGO hybrid film to achieve a controllably selective uptake and release of the phosphate anions. This route involves tuning potential steps to regulate the redox states of the composite film and the variable metal (e.g., Ni, Fe (II)/(III)) in coordination centers…
Preparation and characterization of bio-organoclays using nonionic surfactant
2015
The present study was aimed at the preparation and characterization of tailor made hybrid materials, whose peculiar hosting capability could be exploited in biotechnological applications. With this purpose, the modification of K10 montmorillonite by intercalation of Tween 20 surfactant, was accomplished. The influence of two internal parameters, namely pH and surfactant/clay ratio, on the surfactant uptake ability by clay was investigated. The adsorption mechanism was elucidated on the basis of complementary kinetic and equilibrium studies and, then, corroborated by the useful information provided by the FT-IR, TGA and XRD characterization. The gathered results allow to draw the conclusion …
Fast Measurements of Adsorption on Porous Materials Using Jäntti's Method
1999
In 1972, Jäntti et al. formulated a method to shorten the time taken for adsorption measurements. We suggested at the Kiev International Conference on Vacuum Microbalance Techniques (1999) that the applicability of this method could be widened by considering a number of parallel adsorptions. There is, however, a more complicated but perhaps more interesting variant possible when extra mass transport is considered to occur in series. Such an application could involve adsorption within a porous structure where diffusion must be considered as a process occurring in series with adsorption on the surface.
Effect of Stiffness on the Micellization Behavior of Model H4T4 Surfactant Chains
2006
The micellization behavior of a series of model surfactants, all with four head and tail groups (H4T4) but with different degrees of chain stiffness, was studied using grand canonical Monte Carlo simulations on a cubic lattice. The critical micelle concentration, micellar size, and thermodynamics of micellization were examined. In all cases investigated, the critical micelle concentration was found to increase with increasing temperature as observed for nonionic surfactants in apolar or slightly polar solvents. At a fixed reduced temperature and increasing chain stiffness, in agreement with previous observations, it was found that the critical micelle concentration decreased and the average…
An Extended Kalman Filter-Based Technique for On-Line Identification of Unmanned Aerial System Parameters
2015
ABSTRACT: The present article deals with the identification, at the same time, of aircraft stability and control parameters taking into account dynamic damping derivatives. Such derivatives, due to the rate of change of the angle of attack, are usually neglected. So the damping characteristics of aircraft dynamics are attributed only on pitch rate derivatives. To cope with the dynamic effects of these derivatives, authors developed devoted procedures to estimate them. In the present paper, a complete model of aerodynamic coefficients has been tuned-up to identify simultaneously the whole set of derivatives. Besides, in spite of the employed reduced order model and/or decoupled dynamics, a s…
Geometry of the projectivization of ideals and applications to problems of birationality
2018
In this thesis, we interpret geometrically the torsion of the symmetric algebra of the ideal sheaf I_Z of a scheme Z defined by n+1 equations in an n-dimensional variety. This is equivalent to study the geometry of the projectivization of I_Z. The applications of this point of view concern, in particular, the topic of birational maps of the projective space of dimension 3 for which we construct explicit birational maps that have the same algebraic degree as their inverse, free and nearly-free curves for which we generalise a characterization of free curves by extending the notion of Milnor and Tjurina numbers. We tackle also the topic of homaloidal hypersurfaces, our original motivation, fo…
Preferential localization of Lactococcus lactis cells entrapped in a caseinate/alginate phase separated system.
2013
International audience; This study aimed to entrap bioprotective lactic acid bacteria in a sodium caseinate/sodium alginate aqueous two-phase system. Phase diagram at pH = 7 showed that sodium alginate and sodium caseinate were not miscible when their concentrations exceeded 1% (w/w) and 6% (w/w), respectively. The stability of the caseinate/alginate two-phase system was also checked at pH values of 6.0 and 5.5. Lactococcus lactis subsp. lactis LAB3 cells were added in a 4% (w/w) caseinate/1.5% (w/w) alginate two-phase system at pH = 7. Fluorescence microscopy allowed to observe that the caseinate-rich phase formed droplets dispersed in a continuous alginate-rich phase. The distribution of …
The defined adsorption site of sodium on the TiO2(110)–(1×1) surface
2004
The adsorption site of sodium on the TiO2(1 1 0)–(1 × 1) surface was studied by extended X-ray absorption fine structure. For coverage ranging between 0.25 and 0.5 ML, we find that sodium is on an ‘in-between' site where it is bound to two bridging oxygen atoms at 2.25 Å and one in-plane oxygen atom at 2.40 Å, in full agreement with DFT calculations. At higher coverage the site becomes an hollow site where the sodium atom is equidistant to the three oxygen atoms at 2.30 Å, while metallic sodium clusters are also formed at the surface.
High-Pressure Phase Diagram and Superionicity of Alkaline Earth Metal Difluorides
2018
We study the high-pressure–high-temperature phase diagram and superionicity of alkaline earth metal (AEM) difluorides (AF2, A = Ca, Sr, Ba) with first-principles simulation methods. We find that the superionic behavior of SrF2 and BaF2 at high pressures differ appreciably from that previously reported for CaF2 [Phys. Rev. Lett. 2014, 113, 235902]. Specifically, the critical superionic temperature of SrF2 and BaF2 in the low-pressure cubic fluorite phase is not reduced by effect of compression, and the corresponding high-pressure orthorhombic contunnite phases become superionic at elevated temperatures. We get valuable microscopic insights into the superionic features of AEM difluorides in b…