Search results for "T beam"
showing 10 items of 75 documents
Risk of failure in existing RC balcony and strength verification under degradation phenomena
2020
Abstract In the present paper, the safety conditions of reinforced concrete (RC) balconies subject to degradation phenomena caused by carbonation, presence of chlorides or water infiltration were examined. After a brief review of the typical damages of balconies occurring with detachments of plaster and bricks expulsion, some cases of collapses of balconies recently occurred were presented. Therefore, a calculation model was proposed for a hand verification of the flexural and shear strength of existing corroded T beams cast in place of lightened RC orthotropic slabs forming the balcony and for the calculus of deflection including slippage of steel bars. Diffused and pitting corrosion on st…
Photorefractive detection of antiparallel ferroelectric domains in BaTiO 3 and BaTiO 3 :Co crystals
1998
An all-optical method involving one coherent beam of light and based on photorefractive wave mixing is used to reveal antiparallel ferroelectric domains in one pure, and two cobalt-doped, barium titanate crystals (BaTiO 3 ). Rod-shaped domains with square cross sections are revealed.
Z+/Z− lithium niobate optical waveguide sensitivity related to pyroelectric effect
2020
Lithium niobate crystal is widely used for the design and fabrication of integrated electro-optic modulators. As a ferroelectric material, one sees its spontaneous polarization change with temperature variations. This phenomenon, known as the pyroelectric effect, induces strong waveguide transmission variations for waveguides realized on Z -cut wafers. Waveguides made by titanium in-diffusion either on the Z + or Z − side of the crystal show a significant difference in temperature behavior. Experimental data, enlightened by numerical simulations, help to show why Z − waveguides are more immune to temperature changes than Z + ones.
Manipulation of fast light using photorefractive beam fanning
2014
Light pulse group velocity manipulations due to the specific dispersion of a medium (so-called “slow” and “fast” light phenomena) can be obtained on the basis of several mechanisms. One of these techniques is two-wave mixing in a photorefractive crystal. This work presents a modification of this method, exploiting the strong beam fanning in Sb-doped Sn2P2S6 crystals. Our experimental results demonstrate a “fast light” behavior of Gaussian pulses transmitted through a Sn2P2S6:Sb sample. The phenomenon is due to the beam fanning (i.e., the self-diffraction of the incident beam on self-induced noisy photorefractive gratings) that ensures a significant depletion of the input beam. Due to the re…
Cylindrical Cell-Based Refractometers to Analyse Biomedical Liquids
2015
Compact device of high sensitivity for measurement of the refractive indices of both stationary and flowing liquids has been developed. This device can be used to analyse a variety of biomedical liquids: urine, serum protein. The refractive index (RI) is determined by measuring the deviation of a laser beam passing through a cylindrical cell containing the test liquid. In order to significantly improve the resolution and stability of RI measurements, the repeated reflections and refractions of the light beam travelling through the cylindrical cell are employed.
Fibrous reinforced concrete beams in flexure: Experimental investigation, analytical modelling and design considerations
2008
Abstract The flexural behavior of plain and fibrous reinforced concrete (FRC) beams under monotonic and cyclic actions was analysed. Twelve beams were reinforced with top and bottom longitudinal deformed steel bars and transverse steel stirrups. Concrete, having 30 MPa cylindrical strength, was reinforced with hooked steel fibres at a volume percentage of 1%. Beams, 600 mm in length and with a square side cross-section of 150 mm, were tested in flexure using a three point bending test, adopting three different cover thicknesses of 5, 15 and 25 mm, respectively. The results obtained show that the addition of fibers increases the bearing capacity of the beams and ensures more ductile behaviou…
Study of the response of the ATLAS central calorimeter to pions of energies from 3 to 9 GeV
2009
Çetin, Serkant Ali (Dogus Author) A fully instrumented slice of the ATLAS central detector was exposed to test beams from the SPS (Super Proton Synchrotron) at CERN in 2004. In this paper, the response of the central calorimeters to pions with energies in the range between 3 and 9 GeV is presented. The linearity and the resolution of the combined calorimetry (electromagnetic and hadronic calorimeters) was measured and compared to the prediction of a detector simulation program using the toolkit Geant 4.
Efficiency and timing performance of the MuPix7 high-voltage monolithic active pixel sensor
2018
The MuPix7 is a prototype high voltage monolithic active pixel sensor with 103 times 80 um2 pixels thinned to 64 um and incorporating the complete read-out circuitry including a 1.25 Gbit/s differential data link. Using data taken at the DESY electron test beam, we demonstrate an efficiency of 99.3% and a time resolution of 14 ns. The efficiency and time resolution are studied with sub-pixel resolution and reproduced in simulations.
Multimode OPOs as Sources for Multipartite Entanglement
2009
We present here multimode OPOs as a source of multimode squeezing and multipartite entanglement of continuous-wave light beams, with applications to the engineering of multimode states of light in the spatial and spectral domains.
Spatial information transmission using axial temporal coherence coding
2007
We present an approach that can be used for transmission of information through space-limited systems or for superresolution. The spatial information is coded with different axial temporal coherence by interfering every spatial region in the input with the same region, but with a certain known delay in the longitudinal axis. Every spatial region has different delay. After mixing all of the spatial information, it is transmitted through the space-limited system. At the detection the information is passed through a similar interference setup containing certain axial delay. By temporally scanning along the longitudinal axis, each time a different spatial region that was coded with the correspo…