Search results for "T method"
showing 10 items of 1254 documents
Pre-Stressed Sub-Surface Contribution on Bulk Diffusion in Metallic Solids
2011
Our recent modelling works and corresponding numerical simulations realized to describe the UO2 oxidation processes confirm the theory showing that an applied mechanical strain can strongly affect the local oxygen diffusion in a stressed solid. This result allows us to assume that stress field, previously applied at the surface of a metallic sample on several microns, will delay the degradation during its oxidation. Considering this hypothesis, we implemented a FEM simulation code developed in our laboratory to numerically investigate some different stress fields applied on a sample sub-surface, that might significantly modify the volume diffusion of oxygen during the oxidation process. The…
Dissimilar material lap joints by Friction Stir Welding of Steel and Titanium Sheets: Process Modeling
2013
In the paper a continuum based FEM model for Friction Stir Welding of different material lap joint made out of thin stainless steel and titanium sheets is proposed. The simulation campaign was made out using the 3D Lagrangian implicit code DEFORM{trade mark, serif} by means of a rigid-visco-plastic approach. The model, already set up and tuned for FSW process of similar materials and geometrical configurations takes into account the different mechanical and thermal behavior of the two materials and the microstructural evolution of the considered titanium alloy in the same joint. Additionally, it is able to predict temperature, phase, strain and strain rate distributions and evolution at the…
Friction stir welding of stainless steel thin sheets in lap configuration
2013
New research trends for Friction Stir Welding include the use of highly resistant materials as steels and titanium alloys. In the paper a continuum based FEM model for Friction Stir Welding of lap joint made out of thin stainless steel sheets is proposed, that is 3D Lagrangian implicit, coupled, rigid-viscoplastic. The model, whose potential has been analyzed though temperature distribution comparisons, is able to predict temperature, strain and strain rate distributions, with varying process variables. In this way the FEM model can be applied for effective process and tool design.
Friction Stir Welding of Magnesium Alloys under Different Process Parameters
2010
Experimental and numerical investigations have been performed in order to study the effect of welding parameters on properties of FSW-ed AZ31 magnesium alloy sheets. The results, presented in terms of tensile strength and numerical field variables distributions, allow to understand the behaviour of such material when FSW-ed using different rotational and welding speeds for a given tool geometry.
Nonstationary heat conduction in a stator
1996
In this chapter we describe a method for computing the 3d nonstationary temperature field in the lamination pack of a stator of a synchronous or asynchronous (induction) motor with a centrifugal, meander or chamber ventilation (see [Křižek, Preiningerova]). The stator of a motor has quite a complicated geometrical form. Moreover, it consists of anisotropic materials which have very different heat conductivities, e.g., 332.8 [W/mK] for copper wires and 0.2 [W/mK] for their insulations. This causes big jumps in coefficients of the appropriate heat conduction equation, and is the main source of numerical difficulties in practical calculations.
Formulation and validation of a reduced order model of 2D materials exhibiting a two-phase microstructure as applied to graphene oxide
2018
Abstract Novel 2D materials, e.g., graphene oxide (GO), are attractive building blocks in the design of advanced materials due to their reactive chemistry, which can enhance interfacial interactions while providing good in-plane mechanical properties. Recent studies have hypothesized that the randomly distributed two-phase microstructure of GO, which arises due to its oxidized chemistry, leads to differences in nano- vs meso‑scale mechanical responses. However, this effect has not been carefully studied using molecular dynamics due to computational limitations. Herein, a continuum mechanics model, formulated based on density functional based tight binding (DFTB) constitutive results for GO …
Study of Snowboard Sandwich Structures
2005
The aim of the present research is to extend the knowledge of mechanical properties both on single components and on complete structure employed for snowboard. Flexural and torsion tests are performed to acquire important comparison parameters between snowboard sandwich structures that differ for the core material employed (wood, PVC foam core). A simplified FEM model is proposed to simulate the flexural tests of the sandwich structure showing good predictive capability.
Forming of aluminum foam sandwich panels: Numerical simulations and experimental tests
2006
Abstract The forming of the completed aluminium foam sandwich (AFS) panels would determine an improvement in the manufacturing of parts and panels. In this paper the authors have investigated the formability of AFS through experiments and numerical simulations. As far as the former are concerned, commercially prepared panels have been considered and bending and stamping processes have been taken into account. In addition, FEM analyses have been developed, utilizing a porous material model following the evolution of the material density throughout the forming processes.
Infrared thermography-based evaluation of the elastic-plastic J-integral to correlate fatigue crack growth data of a stainless steel
2019
Abstract The elastic-plastic J-integral is adopted to correlate fatigue crack growth data of ductile metals. An analytical link is known to exist between the J-integral and the strain energy density averaged in a control volume embracing the crack tip. On the other hand, the strain energy fluctuation is the source of temperature variations close to a fatigue crack tip of a metal material; hence the possibility to measure the J-integral from infrared thermographic scanning at the crack tip is envisaged and it is the focus of this paper. It is proposed that the elastic component of the J-integral is derived from a thermoelastic stress analysis, while the plastic component of the J-integral is…
Engineering the crack path in lattice cellular materials through bio-inspired micro-structural alterations
2019
Abstract A computational study on the fracture behaviour of bio-inspired finite-size lattice configurations is performed in this work. The study draws inspiration from recent investigations aimed at increasing the fracture energy of some materials through small modifications of their microstructure. The main question here is whether it is possible, to some extent, to engineer the crack path in metallic cellular materials through such small micro-structural modifications and how to quantify the effect of alternative strategies. Nature provides several examples of strategies used to delay or arrest damage and crack propagation. One striking example is given by the micro-architecture of severa…