Search results for "Tale"
showing 10 items of 6428 documents
Solar and Heat Pump Systems for Domestic Hot Water Production on a Small Island: The Case Study of Lampedusa
2020
The achievement of United Nations Sustainable Development Goals, related to energy and resource use, is a critical issue for small and insulated communities. In many minor islands, solar energy is not correctly exploited, and electrical heaters are connected to weak grids with very a high share of generation by fossil fuels. As a consequence, there is the necessity to assess the potential and the suitability of diffusion of alternative systems to avoid dependency on the electrical grid and reduce carbon emissions. This paper aims to evaluate the technical and economic performances of some alternative systems exploiting renewable energy for domestic hot water production. Four different syste…
Sea water desalination and energy consumption: A case study of wave energy converters (WEC) to desalination applications in sicily
2016
Recent studies about interactions among energy and water are considered as a new field of research. As almost all energy generation processes require significant amounts of water, and water requires energy for treatment and transport, so these two resources are inextricably linked. The main aim of this work is a presentation of the use of renewable energy for desalination plants in Sicily: in particular exploitation of wave energy into electrical energy necessary for water treatment. Desalination is the most energy intensive water treatment technology but it could be solution for many problems in water supply for areas with chronic debt of water. The aim of this work is a description of a s…
BIOCLEANING
2017
Cleaning is one of the first and most important steps in conservative restora- tion intervention, as it removes the unwanted layers of dirt and deposit from the surface of an artefact. It must be done selectively, however, by adapting the cleaning operation to the different zones and removing successive layers of deposit without acting directly on the original materials of the surface. Generally, cleaning protocols are based on chemical or physical procedures with potential negative effects for restorers’ health and/or for the materials constituting the artworks. As an alternative, solvent gels, rigid gels and resin soaps can be used for selective cleaning. In recent decades, biological cle…
A comprehensive comparison between halophilic granular and flocculent sludge in withstanding short and long-term salinity fluctuations
2018
The effects of salinity fluctuations on the activity of autochthonous halophilic bacteria in aerobic granular sludge (AGS) and flocculent activated sludge (FAS) reactors were investigated. The response of nitrifiers and denitrifiers activity to drastic and moderate salinity shocks in the short-term (ST) and long-term (LT) was examined. The BOD5removal efficiency decreased only in the reactors subjected to the drastic LT salinity increase. Nevertheless, stable performances were achieved 18 days after the shock in the AGS-R1 (90%), whereas after 27 days in the FAS-R1 (82%). The loss in nitritation efficiency was higher in the FAS reactors and was proportional to the shock intensity. Nitritati…
Waste activated sludge dewaterability: comparative evaluation of sludge derived from CAS and MBR systems
2016
Nowadays, sludge dewatering is one of the greatest operational cost to wastewater treatment cycle. Specifically, 1t of fresh sludge to be disposed is composed, on average, by 0.25 - 0.30t of suspended solids, with an average cost for treatment and disposal around 280 - 470 €/t of suspended solids. Despite several technologies have been developed with the focus to reduce also the specific sludge production, still mechanical dewatering represents a crucial step to limit the amount of sludge to be disposed. Many physical–chemical parameters influence the sludge dewaterability: floc structure, particle size, bound water content, surface charge and hydrophobicity, Extracellular Polymeric Substan…
The role of extracellular polymeric substances on aerobic granulation with stepwise increase of salinity
2018
Abstract A granular sequencing batch reactor (GSBR) worked for 164 days to study the effect of salinity on aerobic granulation. The feeding had an organic loading rate (OLR) of 1.6 kg COD⋅m −3 ⋅d −1 and a gradual increase of salinity (from 0.30 to 38 g NaCl − ⋅L −1 ) to promote a biological salt-adaptation. First aggregates (average diameter ≈ 0.4 mm) appeared after 14 days. Extracellular polymeric substances (EPSs) analyses revealed that proteins were mainly higher than polysaccharides, and microorganisms metabolized EPSs as additional carbon source, mostly in feast phase, to face the energy demand for salinity adaptation. No significant worsening of organic matter removal was observed. Th…
Simulación de Plataformas Robóticas de Movimiento para Aplicaciones de Realidad Virtual Mediante Filtros Digitales
2017
[ES] El uso de plataformas robóticas de movimiento en simuladores de vehículos y aplicaciones de Realidad Virtual es relativamente habitual. Sin embargo, el ajuste de los algoritmos que controlan su funcionamiento, denominados algoritmos de washout, no es sencillo y requiere de numerosas pruebas hasta obtener una apropiada fidelidad de movimiento. Disponer de herramientas que permitan simular plataformas de movimiento puede permitir simplificar esta tarea. Es por ello que este trabajo presenta un método para la caracterización y simulación de manipuladores robóticos mediante filtros digitales de segundo orden, sencillo de implementar y ajustar a partir de una caracterización previa. El simu…
The role of extracellular polymeric substances (EPS) on aerobic granules formation: comparison between a case of synthetic wastewater supply and anot…
2017
The paper focused on the evolution and the comparison of the extracellular polymeric substances (EPSs) content during the granulation process in two Granular Sequencing Batch Airlift Reactors (GSBAR) (3,5 L) fed with synthetic (R1) and industrial wastewater (R2). The results showed that in both the reactors the EPSs, in particular proteins (PN), were mainly produced during the feast phase because of the high substrate availability, especially under conditions of metabolic stress. Then, the EPSs content reduced during the famine period, because of biodegradation by bacteria. More in detail, during the granulation process, a greater polysaccharides (PS) consumption occurred in both reactors, …
Long live the alien: is high genetic diversity a pivotal aspect of crested porcupine (Hystrix cristata) long-lasting and successful invasion?
2016
AbstractStudying the evolutionary dynamics of an alien species surviving and continuing to expand after several generations can provide fundamental information on the relevant features of clearly successful invasions. Here, we tackle this task by investigating the dynamics of the genetic diversity in invasive crested porcupine (Hystrix cristata) populations, introduced to Italy about 1500 years ago, which are still growing in size, distribution range and ecological niche. Using genome-wide RAD markers, we describe the structure of the genetic diversity and the demographic dynamics of theH. cristatainvasive populations and compare their genetic diversity with that of native African populatio…
Biodeterioration
2017
The biodeterioration of organic and inorganic materials, as well as polymers, is a complex of alteration processes induced by the growing and metabolic activ- ity of organisms. It can be recognized on monuments, wall paintings, stone, wood, paper, vegetal/animal fibers, and parchment artworks. As defined by Hueck (1968), biodeterioration is “any undesirable change in the properties of a material caused by the vital activities of organisms”; this definition is accepted as the meaning of the phenomenon. Both macroorganisms (such as animals, plants and mosses) and microorganisms (such as autotrophic or het- erotrophic bacteria, microfungi, cyanobacteria, algae and lichens) represent the trigge…