Search results for "Theory"
showing 10 items of 24627 documents
Adding Active Damping to Energy-Efficient Electro-Hydraulic Systems for Robotic Manipulators — Comparing Pressure and Acceleration Feedback
2020
The growing interest in energy efficiency, plug-and-play commissioning, and reduced maintenance for heavy-duty robotic manipulators directs towards self-contained, electro-hydraulic cylinders. These drives are characterized by extremely low damping that causes unwanted oscillations of the mechanical structure. Adding active damping to this class of energy-efficient architectures is essential. Hence, this paper bridges a literature gap by presenting a systematic comparison grounded on a model-based tuning of both pressure and acceleration feedback. It is shown that both approaches increase the system damping hugely and improve the performance of the linear system. Acceleration feedback shoul…
Cross-correlation of whitened vibration signals for low-speed bearing diagnostics
2019
Abstract Rolling-element bearings are crucial components in all rotating machinery, and their failure will initially degrade the machine performance, and later cause complete shutdown. The period between an initial crack and complete failure is short due to crack propagation. Therefore, early fault detection is important to avoid unexpected machine shutdown and to aid in maintenance scheduling. Bearing condition monitoring has been applied for several decades to detect incipient faults at an early stage. However, low-speed conditions pose a challenge for bearing fault diagnosis due to low fault impact energy. To reliably detect bearing faults at an early stage, a new method termed Whitened …
Internal model-based feedback control design for inversion-free feedforward rate-dependent hysteresis compensation of piezoelectric cantilever actuat…
2018
Abstract This study proposes a new rate-dependent feedforward compensator for compensation of hysteresis nonlinearities in smart materials-based actuators without considering the analytical inverse model. The proposed rate-dependent compensator is constructed with the inverse multiplicative structure of the rate-dependent Prandtl–Ishlinskii (RDPI) model. The study also presents an investigation for the compensation error when the proposed compensator is applied in an open-loop feedforward manner. Then, an internal model-based feedback control design is applied with the proposed feedforward compensator to a piezoelectric cantilever actuator. The experimental results illustrate that the propo…
Minimal-model for robust control design of large-scale hydraulic machines
2018
Hydraulic machines are in use where the large forces, at relatively low velocities, are required by varying loads and often hazardous and hard-to-reach environments, like e.g. offshore, mining, forestry, cargo logistics, and others industries. Cranes and excavators equipped with multiple hydraulic cylinders are typical examples for that. For design of the robust feedback controls of hydraulic cylinders, already installed into large-scale machines, there is a general lack of reliable dynamic models. Also the suitable and feasible identification techniques, especially in frequency domain, yield limited. This paper proposes a minimal-modeling approach for determining the most relevant open-lo…
Vision based attitude and altitude estimation for UAVs in dark environments
2011
This paper presents a system dedicated to the real-time estimation of attitude and altitude for unmanned aerial vehicles (UAV) under low light and dark environment. This system consists in a fisheye camera, which allows to cover a large field of view (FOV), and a laser circle projector mounted on a fixed baseline. The approach, close to structured light systems, uses the geometrical information obtained by the projection of the laser circle onto the ground plane and perceived by the camera. We present a theoretical study of the system in which the camera is modelled as a sphere and show that the estimation of a conic on this sphere allows to obtain the attitude and the altitude of the robot…
BIAM: a new bio-inspired analysis methodology for digital ecosystems based on a scale-free architecture
2017
Today we live in a world of digital objects and digital technology; industry and humanities as well as technologies are truly in the midst of a digital environment driven by ICT and cyber informatics. A digital ecosystem can be defined as a digital environment populated by interacting and competing digital species. Digital species have autonomous, proactive and adaptive behaviors, regulated by peer-to-peer interactions without central control point. An interconnecting architecture with few highly connected nodes (hubs) and many low connected nodes has a scale- free architecture. A new bio-inspired analysis methodology (BIAM) environment, an investigation strategy for information flow, fault…
On Stability of Virtual Torsion Sensor for Control of Flexible Robotic Joints with Hysteresis
2019
Author's accepted manuscript (postprint). This article has been published in a revised form in Robotica, http://doi.org/10.1017/S0263574719001358. This version is free to view and download for private research and study only. Not for re-distribution or re-use. © 2019 Cambridge University Press. Available from 25/03/2020. Aim of the virtual torsion sensor (VTS) is in observing the nonlinear deflection in the flexible joints of robotic manipulators and, by its use, improving positioning control of the joint load. This model-based approach utilizes the motor-side sensing only and, therefore, replaces the load-side encoders at nearly zero hardware costs. For being applied in the closed control …
Hankelet-based action classification for motor intention recognition
2017
Powered lower-limb prostheses require a natural, and an easy-to-use, interface for communicating amputee’s motor intention in order to select the appropriate motor program in any given context, or simply to commute from active (powered) to passive mode of functioning. To be widely accepted, such an interface should not put additional cognitive load at the end-user, it should be reliable and minimally invasive. In this paper we present a one such interface based on a robust method for detecting and recognizing motor actions from a low-cost wearable sensor network mounted on a sound leg providing inertial (accelerometer, gyrometer and magnetometer) data in real-time. We assume that the sensor…
A non-stationary relay-based 3D MIMO channel model with time-variant path gains for human activity recognition in indoor environments
2021
AbstractExtensive research showed that the physiological response of human tissue to exposure to low-frequency electromagnetic fields is the induction of an electric current in the body segments. As a result, each segment of the human body behaves as a relay, which retransmits the radio-frequency (RF) signal. To investigate the impact of this phenomenon on the Doppler characteristics of the received RF signal, we introduce a new three-dimensional (3D) non-stationary channel model to describe the propagation phenomenon taking place in an indoor environment. Here, the indoor space is equipped with a multiple-input multiple-output (MIMO) system. A single person is moving in the indoor space an…
Adaptive Neural Control of MIMO Nonstrict-Feedback Nonlinear Systems with Time Delay
2016
In this paper, an adaptive neural output-feedback tracking controller is designed for a class of multiple-input and multiple-output nonstrict-feedback nonlinear systems with time delay. The system coefficient and uncertain functions of our considered systems are both unknown. By employing neural networks to approximate the unknown function entries, and constructing a new input-driven filter, a backstepping design method of tracking controller is developed for the systems under consideration. The proposed controller can guarantee that all the signals in the closed-loop systems are ultimately bounded, and the time-varying target signal can be tracked within a small error as well. The main con…