Search results for "Thermal Conductivity"
showing 10 items of 160 documents
Gas–solid chromatographic separation of hydrogen isotopes: a comparison between two palladium bearing materials – alumina and kieselguhr
1998
The separation of hydrogen isotopes (H, D, T) is performed by displacement gas chromatography on palladium. A large isotopic effect is associated with the reversible adsorption of hydrogen by palladium. Two Pd support materials have been compared: alpha-alumina and kieselguhr. The study includes a physicochemical characterization and a set of functional tests. The Van Deemter model gives a fairly good analysis of the process but to get more information, thermoregulated separations are needed. For both supports, palladium is impregnated as small dispersed particles in the 0.1 to 0.3 μm range diameter. For the same palladium loading, alumina is more efficient than kieselguhr.
Investigation of Effective Thermal Conductivity Aluminum Foams
2012
Abstract The study on the heat transfer mechanisms through the aluminium foam with a fluid in void cells of that foam was reported in this paper. Based on laboratory experiments, the effective thermal conductivity coefficient values were found for various type aluminum foams which had been filled up with a gas or a liquid. The significant effects were observed from porosity as well as from metal and fluid properties on the heat transfer capacity in a foam-fluid system. The convective heat transfer phenomenon was identified to occur in the foam cellular space. That phenomenon affected the effective thermal conductivity much more for liquid-filled foams than for gas-filled foams.
Thermal conductivity of disperse insulation materials and their mixtures
2017
Development of new, more efficient thermal insulation materials is a key to reduction of heat losses and contribution to greenhouse gas emissions. Two innovative materials developed at Thermeko LLC are Izoprok and Izopearl. This research is devoted to experimental study of thermal insulation properties of both materials as well as their mixture. Results show that mixture of 40% Izoprok and 60% of Izopearl has lower thermal conductivity than pure materials. In this work, material thermal conductivity dependence temperature is also measured. Novel modelling approach is used to model spatial distribution of disperse insulation material. Computational fluid dynamics approach is also used to est…
Subamorphous thermal conductivity of crystalline half-Heusler superlattices
2021
The quest to improve the thermoelectric figure of merit has mainly followed the roadmap of lowering the thermal conductivity while keeping unaltered the power factor of the material. Ideally an electron-crystal phonon-glass system is desired. In this work, we report an extraordinary reduction of the cross-plane thermal conductivity in crystalline (TiNiSn):(HfNiSn) half-Heusler superlattices (SLs). We create SLs with thermal conductivities below the effective amorphous limit, which is kept in a large temperature range (120–300 K). We measured thermal conductivity at room temperature values as low as 0.75 W m−1 K−1, the lowest thermal conductivity value reported so far for half-Heusler compou…
Estimating the temperature evolution of foodstuffs during freezing with a 3D meshless numerical method
2015
Abstract Freezing processes are characterised by sharp changes in specific heat capacity and thermal conductivity for temperatures close to the freezing point. This leads to strong nonlinearities in the governing PDE that may be difficult to resolve using traditional numerical methods. In this work we present a meshless numerical method, based on a local Hermite radial basis function collocation approach in finite differencing mode, to allow the solution of freezing problems. By introducing a Kirchhoff transformation and solving the governing equations in Kirchhoff space, the strength of nonlinearity is reduced while preserving the structure of the heat equation. In combination with the hig…
Enhanced thermoelectric performance of PEDOT with different counter-ions optimized by chemical reduction
2014
This work reports on the synthesis of the intrinsically conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT) doped with several counter-ions, ClO4, PF6 and bis(trifluoromethylsulfonyl)imide (BTFMSI), by electro-polymerization and its thermoelectric properties. We show that, depending on the counter-ion size, the thermoelectric efficiency of PEDOT can be increased up to two orders of magnitude. A further chemical reduction with hydrazine optimizes the power factor (PF). By changing the counter-ions, we were able to increase the electrical conductivity (σ) of PEDOT by a factor of three, while the Seebeck coefficient remains at the same order of magnitude in the three polymers. The best…
Bio-based rigid high-density polyurethane foams as a structural thermal break material
2020
Abstract Sustainable development of building industry implies increasing usage of green materials. With this aim and for the intended application as a structural thermal break material, rigid high-density polyurethane foams have been manufactured using polyols derived from renewable resources - tall oil fatty acids. Thermal conductivity, compressive strength and stiffness of the foams of density ranging from ca. 100 to 680 kg/m3 have been determined. Comparison of the bio-based foams with reference foams derived from petrochemical resources demonstrated similar performance characteristics thus suggesting that bio-based foams can also serve as structural thermal break materials. Analytical m…
New conducting radical salts based upon Keggin-type polyoxometalates and perylene
2004
Three new radical salts, Per6[PMo12O40]·CH2Cl2 (1), Per6[PMo12O40]·CH3CN (2), and Per9(NBu4)4[SiW12O40]2 (3) (Per = perylene), have been synthesised and their electrical and magnetic properties characterised. These three salts are diamagnetic and they behave as semiconductors with room temperature conductivities of 69, 3.6 and 0.85 S cm−1. While salt 2 presents hole-type conduction and 3 exhibits electron-dominated electrical transport properties, salt 1 shows at 150 K an abrupt change in the thermal dependence of the electrical conductivity and the Seebeck coefficient suggesting a phase transition.
Computational and theoretical studies on lattice thermal conductivity and thermal properties of silicon clathrates
2016
The lattice thermal conductivity is usually an intrinsic property in the study of thermoelectricity. In particular, relatively low lattice thermal conductivity is usually a desired feature when higher thermoelectric efficiency is pursued. The mechanisms which lower the lattice thermal conductivity are not known in sufficient detail and deeper understanding about the phenomena is needed and if such understanding is achieved it can be used to design more efficient thermoelectric materials. In this thesis, the lattice thermal conductivity and other thermal properties of several silicon clathrates, which are known to be promising candidates for the thermoelectric applications, are studied by theoreti…
Thermoelectrics: From history, a window to the future
2019
Thermoelectricity offers a sustainable path to recover and convert waste heat into readily available electric energy, and has been studied for more than two centuries. From the controversy between Galvani and Volta on the Animal Electricity, dating back to the end of the XVIII century and anticipating Seebeck’s observations, the understanding of the physical mechanisms evolved along with the development of the technology. In the XIX century Ørsted clarified some of the earliest observations of the thermoelectric phenomenon and proposed the first thermoelectric pile, while it was only after the studies on thermodynamics by Thomson, and Rayleigh’s suggestion to exploit the Seebeck effect for …