Search results for "Thermal Treatment"

Thermal stability and enhanced thermoelectric properties of the tetragonal tungsten bronzes Nb8-xW9+xO47 (0 <x <5)

2017

Thermoelectric materials are believed to play a fundamental role in the energy field over the next years thanks to their ability of directly converting heat into usable electric energy. To increase their integration in the commercial markets, improvements of the efficiencies are needed. At the same time, cheap and non-toxic materials are required along with easily upscalable production cycles. Compounds of the tetragonal tungsten bronze (TTB) series Nb8-xW9+xO47 fulfill all these requirements and are promising materials. Their adaptive structure ensures glass-like values of the thermal conductivity, and the substitution on the cation side allows a controlled manipulation of the electronic p…

Effects of Pressure, Thermal Treatment, and O2 Loading in MCM41, MSU-H, and MSU-F Mesoporous Silica Systems Probed by Raman Spectroscopy

2015

We present a Raman study of the effects induced by pressure, thermal treatments, and O2 loading in MCM41, MSU-H, and MSU-F representative mesoporous silica. We compared the starting powders with the mechanically pressed tablets produced applying pressures of ∼0.2 and ∼0.45 GPa. The spectra of the three untreated tablets evidence that the main value of the Si-O-Si angle decreases and that in the MCM41 and the MSU-H Si-O-Si hydrolysis occurs, whereas such a process is absent or much less efficient in the MSU-F. Despite their different networks, the three powders tend to crystallize in cristobalite when treatments are at 1000 °C. The MCM41 and MSU-H tablets exhibit behavior similar to their st…

Caractérisation de poudres de zircone synthétisées par voie hydrothermale

1998

La synthese hydrothermale permet la realisation de poudres fines cristallisees et desagglomerees Ces qualites sont appropriees a l'elaboration de composites fins oxyde/oxyde par synthese simultanee des deux phases. Nous avons developpe ce protocole pour la realisation de nanocomposites ahrmine/zircone (Q). Nous presentons ici plus particulierement le travail effectue sur la zircone, Les conditions de traitement hydrothermal et d'un traitement thermique modere supplementaire sont analysees en relation avec les caracteristiques des poudres synthetisees. Differentes techniques complementaires sont utilisees pour ces poudres de zircone: diffraction des rayons X (% de la phase quadratique, taill…

Mechanism of crystallization of pyroxene-based glass-ceramic glazes

2004

Abstract The mechanism of crystallization of a powdered glass with composition in the pyroxene crystallization primary field within the CaO–MgO–Al 2 O 3 –SiO 2 quaternary system and containing some additives was studied. The crystallization sequence was compared with that from the same base glass without additives. After a short thermal anneal both powdered glasses showed phase separation. Further thermal treatment gave rise to the crystallization of pyroxene. Anorthite as secondary crystalline phase was also detected in the quaternary glass (without additives). The starting crystallization in the glass with additives took place in the outer surface of glass particles probably in the immisc…

Hydrothermal Processing for Increasing the Hydroxyl Ion Concentration in Hydroxyl Depleted Hydroxyapatite

2018

Thermal spraying is commercially used to produce hydroxyapatite coatings, but the high temperature depletes hydroxyl ions in the structure. To return hydroxyapatite to its original state, it is necessary to restore the hydroxyl ion content in the structure. In this work, the effect of hydrothermal treatment on the hydroxyl ions was investigated in hydroxyapatite powder and thermally sprayed hydroxyapatite coatings. Samples were hydrothermally treated at 200 °C for 24 h and 48 h. Chemical phases were determined by X-ray diffraction, functional groups and hydroxyl ion concentration was examined by Fourier transform infra-red spectroscopy. Results showed that hydrothermal processing of hydroxy…

Synthesis of Nd:YAG nanopowder using the citrate method with microwave irradiation

2010

Abstract Nd:YAG nanopowders were prepared using the Pechini process with microwave irradiation ( MWs ). A reference sample was also prepared using conventional heating. XRD pattern analysis showed that nanopowder obtained by means of conventional heating and calcination for 1 h at 900 °C has a structure made up of the garnet phase together with the hexagonal phase that disappeared after two additional hours of thermal treatment. The MWs powder calcined for 1 h consists of the single garnet phase. SAXS data analysis indicated that nanoparticles are characterized by a sharp interface. TEM investigation showed crystalline particles with remarkable agglomeration in both samples, although a more…

Studies of TiO<sub>2</sub> Ceramics Structure after Thermal Treatment at Different Conditions

2014

The present work describes results of investigation of structural characteristics of TiO2 ceramics, depending on temperature and thermal treatment conditions by using a variety of characterization techniques. TiO2 ceramics was prepared by extrusion method and developed as a material for electrodes for innovative water treatment technologies. It was shown that non-stoichiometric phase TiO1.95 was observed after thermal treatment of TiO2 ceramics under high vacuum conditions.

Sizes and Shapes of Crystallites in Mullites Produced by Thermal Treatment of Kaolin - Alumina Mixture

2001

Effect of additives on the crystallization of cordierite-based glass-ceramics as glazes for floor tiles

2003

Abstract The effect of several additives such as fluxes and/or nucleants on a parent glass with composition located in the primary field of cordierite within the quaternary system CaO–MgO–Al 2 O 3 –SiO 2 has been examined. Crystallization path of glasses was determined by differential thermal analysis (DTA) and X-ray powder diffraction (XRD). Pressed pellets of powdered glasses containing different additives were submitted at thermal treatments up to 1200 °C. The microstructural development at several temperatures was followed by field emission scanning electron microscopy and energy-dispersive X-ray analysis. The results shown that additions of TiO 2 as nucleant and/or B 2 O 3 as flux to a…

Effects of Thermal Treatment on the Structure of Eu:YAG Nanopowder

2007

Eu:YAG nanopowder precursors were obtained by co-precipitation of aluminium, yttrium and europium nitrates solution with ammonia. The hydroxides precursors were calcined at different temperatures from 900 to 1200°C as a function of holding time (1, 2 and 6 hours). The presence of Eu3+ ions in the matrix was confirmed by Energy Dispersive X-rays analysis. X-Ray Diffraction investigation by the Rietveld method shows that the sample treated at 900°C for 1 hour is essentially the garnet phase with the minor presence of hexagonal and monoclinic metastable phases. The Eu3+ ions are incorporated into the garnet phase, as is suggested by the lattice parameter value being larger than that in literat…