Search results for "Thermal analysi"

Effect of some additives on the development of spinel-based glass-ceramic glazes for floor-tiles

2005

Abstract The feasibility of developing spinel-based glass-ceramic glazes from a glass with composition in the system ZnO–MgO–B 2 O 3 –Al 2 O 3 –SiO 2 was examined. To do it additional fluxes and/or nucleants were added to a parent glass before melting. Pressed pellets of powdered glasses were submitted to standard thermal treatments up to 1200 °C. The crystallization path and the microstructural development at several temperatures were followed by several experimental techniques. The results showed that additions of TiO 2 as nucleant or additional B 2 O 3 as flux to the chosen glass favored the crystallization of cordierite or mullite as main crystalline phase. Glasses which also contained …

WOOD TREATMENT BASED ON HALLOYSITE/HYDROXYPROPYL CELLULOSE COMPOSITE. THERMOMECHANICAL AND POROSITY CHARACTERIZATION

2014

Novel Wireless Sensor System for Dynamic Characterization of Borehole Heat Exchangers

2011

The design and field test of a novel sensor system based in autonomous wireless sensors to measure the temperature of the heat transfer fluid along a borehole heat exchanger (BHE) is presented. The system, by means of two specials valves, inserts and extracts miniaturized wireless sensors inside the pipes of the borehole, which are carried by the thermal fluid. Each sensor is embedded in a small sphere of just 25 mm diameter and 8 gr weight, containing a transceiver, a microcontroller, a temperature sensor and a power supply. A wireless data processing unit transmits to the sensors the acquisition configuration before the measurements, and also downloads the temperature data measured by the…

Effect of electrolytical hydrogenation on the thermal stability and crystallization kinetics of METGLASS MBF-50

2007

The effect of electrolytical hydrogenation on both the surface and volume crystallization kinetics and thermal stability of amorphous alloy METGLASS MBF-50 has been investigated. The surface crystallization has been investigated by the exoelectron emission (EEE) technique, whereas the volume crystallization has been followed by differential thermal analysis (DTA). It has been found that both the surface and volume crystallization of investigated material occur in two stages. The surface crystallization occurs at temperature lower and with activation energy distinctly smaller than the volume crystallization. Hydrogenation of the investigated metallic glass enhances its thermal stability by i…

Effect of electrolytical hydrogenation on the thermal stability and crystallization kinetics of metallic glass Fe79Si9B12

2011

The effect of electrolytical hydrogenation on both the surface and volume crystallization kinetics and thermal stability of amorphous alloy Fe79Si9B12 has been investigated. The parameters of the surface and volume crystallization (temperature, activation energy) have been determined applying the exoelectron emission (EEE) and differential thermal analysis (DTA) methods, respectively. It has been found that the surface crystallization of investigated material occurs at temperature much lower and with activation energy smaller than the volume crystallization. The determination of the activation energies for the volume and surface crystallization by the combination of DTA and EEE techniques e…

Effect of the milling conditions on the degree of amorphization of selenium by milling in a planetary ball mill

2007

The effect of the milling parameters (rotation speed of the milling device and duration of milling) on the phase composition of the products of milling of fully crystalline selenium has been investigated. The milling was conducted using a planetary micromill and the phase composition of the milling products was determined by differential thermal analysis. It has been found that ball milling leads to the partial amorphization of the starting crystalline material. The content of amorphous phase in the milling products depends, in a rather complicated way, on the milling parameters. At the milling parameters adopted in the present study, the milling product was never fully amorphous. The compl…

Parametric thermal analysis for the optimization of Double Walled Tubes layout in the Water Cooled Lithium Lead inboard blanket of DEMO fusion reactor

2019

Abstract Within the roadmap that will lead to the nuclear fusion exploitation for electric energy generation, the construction of a DEMOnstration (DEMO) reactor is, probably, the most important milestone to be reached since it will demonstrate the technological feasibility and economic competitiveness of an industrial-scale nuclear fusion reactor. In order to reach this goal, several European universities and research centres have joined their efforts in the EUROfusion action, funded by HORIZON 2020 UE programme. Within the framework of EUROfusion research activities, ENEA and University of Palermo are involved in the design of the Water-Cooled Lithium Lead Breeding Blanket (WCLL BB), that …

Kinetics of phase transitions in vitreous chalcogenide semiconductors AsxSe100m-x-yBiyas studied by the differential thermal analysis and exoelectron…

2011

Kinetics of glass transition (retrification) in chalcogenide semiconductors AsxSe100-x-yBy (x = 20 or 30, and y = 0 and 1) has been investigated by parallel differential thermal analysis (DTA) and exoelectron emission (EEE) measurements. EEE is a surface effect accompanying the structural transformations in the surface layer, whereas the DTA technique gives information about the transformations occurring in the volume of the sample. Temperature dependencies of the DTA signal and of the EEE intensity have been determined and the values of the activation energy for both the volume and the surface retrification have been determined by the Ozawa method for each of the four investigated material…

Experimental investigation on lithium borohydride hydrolysis

2010

Abstract Lithium borohydride, one of the highest energy density chemical energy carriers, is considered as an attractive potential hydrogen storage material due to its high gravimetric hydrogen density (19.6%). Belonging to borohydride compounds, it presents a real issue to overcome aims fixed by the U.S. Department of Energy in the field of energy, and so crystallizes currently attention and effort to use this material for large scale civil and military applications. However, due to its important hygroscopicity, lithium borohydride is a hazardous material which requires specific handling conditions for industrial aspects. In order to understand much more the reaction mechanism involved bet…

Coordination polymer flexibility leads to polymorphism and enables a crystalline solid-vapour reaction: a multi-technique mechanistic study.

2015

Despite an absence of conventional porosity, the 1D coordination polymer [Ag4 (O2 C(CF2 )2 CF3 )4 (TMP)3 ] (1; TMP=tetramethylpyrazine) can absorb small alcohols from the vapour phase, which insert into AgO bonds to yield coordination polymers [Ag4 (O2 C(CF2 )2 CF3 )4 (TMP)3 (ROH)2 ] (1-ROH; R=Me, Et, iPr). The reactions are reversible single-crystal-to-single-crystal transformations. Vapour-solid equilibria have been examined by gas-phase IR spectroscopy (K=5.68(9)×10(-5) (MeOH), 9.5(3)×10(-6) (EtOH), 6.14(5)×10(-5) (iPrOH) at 295 K, 1 bar). Thermal analyses (TGA, DSC) have enabled quantitative comparison of two-step reactions 1-ROH→1→2, in which 2 is the 2D coordination polymer [Ag4 (O2 …