Search results for "Thermal properties"
showing 10 items of 33 documents
Carbon Fiber Composites Cured by γ-Radiation-Induced Polymerization of an Epoxy Resin Matrix
2008
The use of ionizing radiation in order to initiate polymerization of suitable monomers has found increased interest in the last two decades due to its several advantages. In this work, carbon fiber composites through gamma radiation polymerization of epoxy matrices have been produced for aerospace and advanced automotive applications. Composite samples were produced by irradiation at room temperature using different radiation doses and, as reference, thermal curing of the same epoxy resin formulations was also carried out. Furthermore, some irradiated samples were subjected to postirradiation thermal curing to complete the polymerization reactions. The properties of the cured materials were…
Effects of Nylon 6,6 Nanofibrous Mats on Thermal Properties and Delamination Behavior of High Performance CFRP Laminates
2014
none 8 no Nylon 6,6 electrospun nanofibrous membranes interleaved in Carbon Fibre Reinforced Plastic (CFRP) laminates have been proposed as a means to provide a higher threshold value to delamination on structural sites where composites are more prone to develop such failure. A model, highly crosslinked thus inherently brittle, epoxy matrix was selected for its high Young’s modulus and glass transition temperature exceeding 250 °C. The influence of the Nylon 6,6 nanofibres on the curing behaviour of the matrix and on the thermal and dynamic mechanical properties of the cured resin was investigated. These properties were related to the features of the epoxy resin and of the resin impregnated…
Protection of high-density polyethylene-silicon composites from ultraviolet-visible photodegradation
2017
[EN] The extent of the ultraviolet¿visible (UV¿vis) photoirradiation effect on high-density polyethylene (HDPE) and HDPE¿sili-con (Si) composites is reported in terms of the addition of Si microparticles at contents of 0.1, 1, and 5 wt %. A standard acceleratedUV-vis exposure was applied over 2750 h, corresponding to 22 months in Florida. Thermogravimetry, differential scanning calorimetry,and Fourier transform infrared spectroscopy were used as reliable techniques for monitoring the quality of the HDPE-Si composites. Theincreasing addition of Si microparticles delayed the photodegradation of the HDPE¿Si composites. Because of their strong light-scattering effects, Si microparticles blocked…
Fracture behavior and mechanical, thermal, and rheological properties of biodegradable films extruded by flat die and calender
2020
The development of biodegradable materials for tailored applications, particularly in the field of polymeric films and sheets, is a challenging technological goal as well as a contribution to help protect the environment. Poly(lactic) acid (PLA) is a promising substitute for several oil-based polymers; however, to overcome its thermal and mechanical drawbacks, researchers have developed solutions such as blending PLA with polybutylene adipate terephthalate (PBAT), which is capable of increasing the ductility of the final material. In this study, PLA/PBAT binary blends, with minimum possible content of nonrenewable materials, were examined from processing, thermal, morphological, and rheolog…
Improvement of interaction in and properties of PMMA-MWNT nanocomposites through microwave assisted acid treatment of MWNT
2013
Soluble derivatives of multi-walled carbon nanotubes (MWNT) embedded in a poly(methylmethacrylate) (PMMA) matrix forming thick, homogeneous and transparent nanocomposites, were prepared and characterized. A new photo-assisted method using microwaves, to purify the MWNTs from amorphous carbon and synthesis catalyst clusters, was tested in a sulphonitric mix. This method shortened the processing time compared to other methods. Pristine and functionalized MWNTs were introduced into the MMA, then in situ photo-polymerized. Transmission electron microscopy (TEM) and X-ray diffractometry (XRD), as well as Fourier-transform infrared (FTIR), Raman and nuclear magnetic resonance (NMR) spectroscopy w…
The effect of silica nanoparticles on the morphology, mechanical properties and thermal degradation kinetics of polycarbonate
2012
Abstract Polycarbonate/silica nanocomposites with different silica quantities were prepared by a melt compounding method. The effect of silica amount, in the range 1–5 wt.%, on the morphology, mechanical properties and thermal degradation kinetics of polycarbonate (PC) was investigated. Clusters of silica nanoparticles were well dispersed in the polycarbonate whose structure remained amorphous. NMR results showed intermolecular interactions involving the carbonyl groups of different polymeric chains which did not affect the intramolecular rotational motions. The presence of the lowest silica content showed a decrease in the storage and loss moduli below the glass transition temperature, pro…
Giant barocaloric effects over a wide temperature range in superionic conductor AgI
2017
Current interest in barocaloric effects has been stimulated by the discovery that these pressure-driven thermal changes can be giant near ferroic phase transitions in materials that display magnetic or electrical order. Here we demonstrate giant inverse barocaloric effects in the solid electrolyte AgI, near its superionic phase transition at ~420 K. Over a wide range of temperatures, hydrostatic pressure changes of 2.5 kbar yield large and reversible barocaloric effects, resulting in large values of refrigerant capacity. Moreover, the peak values of isothermal entropy change (60 J K−1 kg−1 or 0.34 J K−1 cm−3) and adiabatic temperature changes (18 K), which we identify for a starting tempera…
Study of thermal properties of polyethylene and polypropylene nanocomposites with long alkyl chain-substituted POSS fillers
2016
The effect of incorporation of octakis({alkyl}dimethylsiloxy)octasilsesquioxanes molecules with n-octyl, n-octadecyl and 4-methyl-hexyl substituents on thermal properties of polypropylene (PP), low-density polyethylene (LDPE) and high-density polyethylene (HDPE) was investigated. Thermal properties of those composite materials were evaluated by means of the differential scanning calorimetry (DSC) and thermogravimetric analysis (TG) methods. The type and mass% content of POSS nanofillers influenced the crystallization and melting properties as well as thermal stability of the obtained polyolefin nanocomposites. The incorporated POSS particles—acting as nucleating agents—improved the crystall…
Study of the interactions and physicochemical properties of pea and egg white protein mixtures : from the colloidal to the gelled state.
2022
In recent years, due to the growth of world population, people's consumption of animal protein has increased, leading to the increase of greenhouse gas emissions and land occupation. Therefore, it is necessary to partially replace animal protein with vegetable protein to increase the proportion of vegetable protein in daily consumption and developing mixed food systems seems to be one adequate solution. Pea proteins as a source of plant proteins have good nutritional properties but with limited functional properties while egg white (EW) has good functional properties such as gelling and foaming. Thereby, the physicochemical interactions from mixtures of both types of protein needs to be und…
Gamma rays induced synthesis of graphene oxide/gold nanoparticle composites: structural and photothermal study
2022
Gamma irradiation provides an alternative pathway to conventional gold nanoparticle synthesis because it is simple, fast, and economical. Here, we employed gamma irradiation at low doses (1–20 kGy) to obtain gold nanoparticles (Au NPs) anchored onto graphene oxide (GO) sheets. GO was selected as a suitable platform for the nucleation and growth of Au NPs because of its large surface area and good dispersibility in water due to the presence of polar oxygen-containing functional groups in its structure. Gamma irradiation at all the applied doses led to the reduction of chloroauric acid and the formation of evenly distributed Au NPs at the GO surface, simultaneously causing the reduction of GO…