Search results for "Thermal"
showing 10 items of 3576 documents
Composition and Color of Maya Blue: Reexamination of Literature Data Based On the Dehydroindigo Model
2019
[EN] An analysis of literature data studying the composition and color of Maya blue (MB) type materials prepared from indigo, dehydroindigo, and different aluminosilicates, accompanied by new spectral data, is presented. After thermal treatment at above 100 degrees C, indigo-based specimens displayed Raman and UV-vis spectroscopic features common to those of equivalent dehydroindigo-based replicants, thus supporting the socalled dehydroindigo model (J. Phys. Chem. B 2006, 110, 6027-6039) in which the dehydroindigo/indigo ratio, increasing with temperature, is crucial to determine the color of MB and its variability. The current analysis supports the view of MB as a polyfunctional hybrid mat…
Zirconia Based Nanomaterials for Oxygen Sensors – Generation, Characterisation and Optical Properties
2007
Microwave driven hydrothermal synthesis and hydrothermal synthesis were used to obtain ZrO2 nanopowders. Their production with varying phase composition, the characterisation and selected optical properties concerning their potential use as luminescence oxygen sensors are reported. It was found that the powders obtained by the microwave driven hydrothermal method and annealed at 750 0C in air show experiment repeatability within an accuracy of 6 %.
Relaxor ferroelectric PbSc1/2Nb1/2O3—PbZn1/3Nb2/3O3— PbMg1/3Nb2/3O3ceramics
2000
Abstract Original ternary solid solutions PbSc1/2Nb1/2O3 — PbZn1/3Nb2/3O3-PbMg1/3Nb2/3O3 (PSN-PZN-PMN) have been synthesized by solid state reaction from oxides. Ceramic samples have been obtained by both conventional and hot pressing techniques. The density of the obtained hot pressed ceramics reaches 98% of the value calculated from X-ray data. Dense, high quality samples of pure PZN and compositions containing over 0.8 molar parts of PZN could not be obtained — porosity was up to 10% and they were mainly comprised of the cubic pyrochlore phase. Density, porosity, water absorbtivity, and dielectric permittivity and dissipation factor of the ceramic samples have been measured. Data of diff…
Dielectric Dispersion and Ion Conductivity in High-Pressure LixNaw1-xNbO3Solid Solutions
2009
Thermal behaviour and dispersion of dielectric permeability and thermal behaviour of conductivity measured in ferroelectric ceramic solid solutions of Li x Na 1−x NbO 3 (x = 0.17, 0.25) synthesized at high pressure and possessing extended region of homogeneity are reported. The Li x Na 1−x NbO 3 (x = 0.17, 0.25) solid solutions of perovskite structure are found to be super-ionic conductors at rather low temperatures O ≥ 400 K. Dielectric dispersion and anomalous behaviour of dielectric permeability are observed in the thermal range of super-ionic conductivity corresponding to structural transformations in the high-pressure solid solutions.
Conductivities and silver electrode polarization resistance of solid electrolyte ceramics from ZrO 2 -Y 2 O 3 powder synthesized in air plasma
1998
Ceramic specimens have been obtained from the powder of ZrO2-7.5 mol% Y2O3 having a specific surface area of 30 m2/g synthesized in air plasma. The novelty of this research lies in the fact that the plasma process makes it possible to prepare so-called nanopowders with a particle size less than 100 nm, possessing specific physical, chemical and technological properties. The sintered density of the specimens was 94–96% of the theoretical value, 6.001 g/cm3. The X-ray diffraction pattern of the specimens corresponded to a face-centered cubic lattice. Impedance in the frequency range of 100 Hz–15 MHz and d.c. polarization curves in a potential range of −10 to 10 mV were measured in the tempera…
Luminescence of X-ray induced radiation defects in modified lithium orthosilicate pebbles with additions of titanium dioxide
2017
The authors greatly acknowledge the technical and experimental support of O. Leys, M. H. H. Kolb, and R. Knitter (Karlsruhe Institute of Technology, Germany). The work is performed in the frames of the University of Latvia financed project No. Y9-B044-ZF-N-300, “Nano, Quantum Technologies, and Innovative Materials for Economics”.
On the origin of the sigmoid shape in the UO2 oxidation weight gain curves
2009
International audience; Cracking and spalling are known to occur during the oxidation of UO2. However, these phenomena are not considered by the existing kinetic models of the oxidation of UO2 into U3O8. In this study the oxidation of UO2 samples of various sizes from the single crystal to nanopowders, has been followed by isothermal and isobaric thermogravimetry, environmental scanning electron microscopy and in situ X-ray diffraction at temperatures ranging from 250 to 370°C in air. It has been shown that cracking occurs once a critical layer thickness of intermediate oxide has been reached, which corresponds to the beginning of the sigmoid kinetic curve. Cracking contribution to the sigm…
Oxygen stoichiometry control of nanometric oxide compounds: The case of titanium ferrites
2011
Three techniques have been coupled with an original device, based on H{sub 2}/H{sub 2}O equilibrium, controlling oxygen partial pressure: XRD, TGA and DC conductivity in order to characterize very reactive compounds such as nanometric powders. From XRD, both the structure and the oxygen stoichiometry (thanks to their lattice parameter) were investigated in situ. From TGA, it was the oxygen stoichiometry (thanks to mass gain or loss) which was determined. From DC conductivity, it was both the structure and the oxygen stoichiometry (thanks to the activation energy) which were obtained. The advantages were to determine very rapidly and with a small amount of powder the equilibrium conditions (…
Segmented Thermoelectric Oxide-Based Module for High-Temperature Waste Heat Harvesting
2015
We report a high-performance thermoelectric (TE) oxide-based module using the segmentation of half-Heusler Ti_(0.3)Zr_(0.35)Hf_(0.35)CoSb_(0.8)Sn_(0.2) and misfit-layered cobaltite Ca_3Co_4O_(9+δ) as the p-leg and 2 % Al-doped ZnO as the n-leg. The maximum output power of a 4-couple segmented module at ΔT=700 K attains a value of approximately 6.5 kW m^(−2), which is three times higher than that of the best reported non-segmented oxide module. The TE properties of individual legs, as well as the interfacial contact resistances, were characterized as a function of temperature. Numerical modeling was used to predict the efficiency and to evaluate the influence of the electrical and thermal lo…
Mechanism of crystallization of Co-cordierites from stoichiometric powdered glasses
2002
Abstract The influence of cobalt, as a divalent cation, on the crystallization behaviour of the cordierite based glasses was studied. Powdered glass specimens of stoichiometric composition 2MO 2Al 2 O 3 5SiO 2 (M=Co and/or Mg) were obtained and thermally treated at several temperatures and times, and the sequence of crystallization and their microstructural evolution were analysed by X-ray diffraction (XRD) and field emission scanning electron microscopy (FESEM). Results on the crystallization sequence showed that the steps in the crystallization path are independent of the nature of the divalent cation. The first crystalline phase detected displayed the μ-cordierite structure, i.e. a solid…