Search results for "Thermal"

Dependence of Coefficient of volumetric thermal expansion (CVTE) of glass fiber reinforced (GFR) polymers on the glass fiber content

2007

In a Glass Fiber Reinforced (GFR) polymer, the coefficient of volumetric thermal expansion CVTE (determined as a sum of the coefficients of linear thermal expansion CLTE’s for the three principal directions) is sometimes much smaller than the value predictable on the basis of well acquainted models, such as Chow model, taking into account fibers anisotropy and aspect ratio.

Effect of irradiation temperature and dose rate on the mechanical tensile behaviour of low density polyethylene

1993

Abstract The effect of ageing due to gamma radiation, at various dose rates and temperatures, on the mechanical tensile behaviour of low density polyethylene is studied. In order to detect synergistic effects, tensile tests on samples subjected to thermal treatment corresponding to the same temperature for the same time as for the irradiation tests have also been performed. The results indicate a generalized decrease of the elongation at break, with brittleness of the material for the most severe ageing treatments. For modulus values, an increase is observed for particular experimental conditions. These results are related to morphological and structural modifications induced in the polymer…

Crystallization kinetics in relation to polymer processing

1993

Phase distribution of quenched samples has been determined by a deconvolution procedure of WAXS spectra in a wide range of cooling rates. The informations collected together with isothermal and DSC results provide a very wide set of data on the crystallization kinetics of polymers relevant which covers conditions encountered in most polymer processing operations. They have been compared with predictions of a non-isothermal crystallization model assuming two independent and parallel crystallization processes competing during solidification.

Role of Solvent Compatibility in the Phase Behavior of Binary Solutions of Weakly Associating Multivalent Polymers

2021

AbstractCondensate formation of biopolymer solutions, prominently those of various intrinsically disordered proteins (IDPs), is determined by “sticky” interactions between associating residues, multivalently present along the polymer backbone. Using a ternary mean field “stickers-and-spacers” model, we demonstrate that if sticker association is of the order of a few times the thermal energy, a delicate balance between specific binding and non-specific polymer-solvent interactions gives rise to a particularly rich ternary phase behavior under physiological circumstances. For a generic system represented by a solution comprising multi-associative scaffold and client polymers, the difference i…

Time-resolved rheology as a tool to monitor the progress of polymer degradation in the melt state - Part I: Thermal and thermo-oxidative degradation …

2015

Abstract Thermal and thermo-oxidative degradation of polyamide 11 (PA11) in the melt state (T = 215 °C) are studied by resorting to time-resolved mechanical spectroscopy. Such an approach allows to elude the changes in the rheological properties occurring while testing, thus enabling the rigorous study of polymer degradation in the melt state. Different concurrent degradation reactions in oxidative (air) and non-oxidative (N2) environment are promptly guessed by studying the time evolutions of rheological functions. In particular, changes in the zero-frequency complex viscosity reflects changes in the average molecular weight, while the appearance of a yield stress in the complex viscosity …

Rheological behavior and thermal stability of poly(phenylene sulfide)/vectra-B950 blends

1994

Blends of polyphenylene sulfide (PPS) with a commercial, wholly aromatic, liquid crystalline polymer (LCP), Vectra-B950, have been prepared by melt-blending. Their rheological behavior has been studied in order to determine if the LCP displays a processing aid ability, and under what conditions it gives rise to potentially reinforcing fibrils dispersed in the PPS matrix. The problem of the thermal stability of PPS/LCP blends, which has been considered by some authors as the main obstacle to the production of usable materials due to the evolution of gaseous substances during processing, has been discussed. © 1994 John Wiley & Sons, Inc.

Effects of filler type and mixing method on the physical properties of a reinforced semirigid liquid crystal polymer

1996

Semirigid liquid crystalline polymers (LCPs) show some advantages with respect to rigid LCP: in particular lower processing temperatures, better compatibility with flexible thermoplastics, but also some disadvantages. Thermal resistance of rigid LCPs is much better and the maximum working temperature is, in general, very high. The thermomechanical properties can be improved by adding inorganic fillers. In this work processing, mechanical and thermomechanical properties of a filled semirigid liquid crystal copolyester are reported. Several inorganic fillers have been used in order to put in evidence the influence of shape and dimensions of the particles on the properties of the filled materi…

Preparation of Soft Microactuators in a Continuous Flow Synthesis Using a Liquid-Crystalline Polymer Crosslinker

2012

We present the synthesis of a polymeric liquid crystalline (LC) crosslinker and its usage in the preparation of soft microactuators. The microactuators, composed of thermoresponsive liquid crystalline elastomers (LCE), are fabricated in a microfl uidic device in a continuous “on the fl y” process. The LC polymer crosslinker is miscible with the LC monomer and provides for a rapid polymerization and crosslinking. Most importantly, it promotes an enantiotropic mesophase of the mobile monomer phase, which is not provided by conventional nonmesogenic crosslinkers. This allows an isothermal handling inside the microfl uidic setup. Temperature-driven shape changes up to 65% could be achieved by j…

Dielectric properties of a filled epoxy resin: Effect of thermal treatments

1982

Dielectric measurements have been performed at several frequencies on samples of a cycloaliphatic epoxy resin filled with aluminum hydroxide. The samples were thermally treated at three different temperatures for times up to 2,000 hours. At low aging temperatures and times an improvement of the characteristics is observed due perhaps to an assessment of the bulk of the polymer and more precisely to a change in the free volume. At high temperatures and times a thermo-oxidation involving layers deeper and deeper becomes the predominant mechanism responsible of the decrease in the properties with respect to the virgin material.

2019

Abstract The preparation method of a polymer composite and the filler loading are amongst the factors that influence the properties of the final composites. This article studies the effect of these factors on the thermal stability and thermal degradation kinetics of poly(methyl methacrylate) (PMMA)/mesoporous silica (MCM-41) composites filled with small amounts of MCM-41. The PMMA/MCM-41 composites were prepared through in situ polymerisation and melt mixing methods, with MCM-41 loadings of 0.1, 0.3, and 0.5 wt.%. The presence of MCM-41 increased the thermal stability of PMMA/MCM-41 composites prepared by melt mixing, but in the case of the in situ polymerised samples, the MCM-41 accelerate…