Search results for "Thermal"

showing 10 items of 3576 documents

Evaluation of entropies of fusion of polychlorinated naphthalenes by model congeners: A DSC study

2006

Abstract Thirteen congeners of polychlorinated naphthalenes (PCN) were synthesized and studied by differential scanning calorimetry (DSC). Melting points (Tm) were obtained for all thirteen, and enthalpies of fusion (ΔHf) were obtained for nine congeners. Melting points of other PCNs, except for five, were found in literature. In addition, experimental ΔHf values determined by DSC were found only for 1- and 2-mono-chloronaphthalenes in the literature. The missing or uncertain values of the eight melting points and 64 enthalpies of fusion were estimated by multiple linear regressions using a set of thirteen molecular descriptors as candidates for independent variables. The stepwise model of …

Entropy of fusionPartition coefficientDifferential scanning calorimetryChemistryMolecular descriptorEnthalpy of fusionLinear regressionMelting pointThermodynamicsPhysical and Theoretical ChemistryCondensed Matter PhysicsThermal analysisInstrumentationThermochimica Acta
researchProduct

Evaluating the thermal-radiative performance of ENVI-met model for green infrastructure typologies: Experience from a subtropical climate

2022

Abstract Microclimate knowledge has been intensively integrated into urban planning and design to improve the buildings’ energy performance and outdoor thermal comfort. To assess the climatic mitigation strategies, numerical modeling is gaining higher relevance. ENVI-met, a microclimate model to simulate the complex surface-vegetation-atmosphere interactions in the built environment, is receiving increasing popularity. This study aims to systematically evaluate the thermal-radiative performance of the ENVI-met model based on its recent updates. First, a field measurement was conducted in a subtropical city. Thermal-radiative parameters were collected besides three green infrastructure (GI) …

Environmental EngineeringForcing (recursion theory)Computer scienceGeography Planning and DevelopmentGreen roofMicroclimateThermal comfortBuilding and ConstructionCivil engineeringUrban planningGreen infrastructureGreen wallBuilt environmentCivil and Structural EngineeringBuilding and Environment
researchProduct

Geochemical characterisation of the thermo-mineral waters of Greece

2021

AbstractGeothermal areas of Greece are located in regions affected by recent volcanism and in continental basins characterised by elevated heat flow. Many of them are found along the coast, and thus, water is often saline due to marine intrusion. In the current study, we present about 300 unpublished and literature data from thermal and cold mineral waters collected along Greece. Samples were analysed for major ions, Li, SiO2 and isotopes in water. Measured temperatures range from 6.5 to 98 °C, pH from 1.96 to 11.98, while Total Dissolved Solutes (TDS) from 0.22 to 51 g/L. Waters were subdivided into four main groups: (1) thermal; (2) cold; (3) acidic (pH < 5); and (4) hyperalkaline (pH …

Environmental EngineeringGlobal meteoric water lineδ18OCarbon dioxide Geothermometry Hydrogeochemistry Stable isotopesGeochemistry010501 environmental sciences010502 geochemistry & geophysics01 natural scienceschemistry.chemical_compoundIsotopesGeochemistry and PetrologyEnvironmental ChemistrySeawaterGroundwaterGeothermal gradient0105 earth and related environmental sciencesGeneral Environmental ScienceWater Science and TechnologyMineralGreeceStable isotope ratioGeneral MedicineSilicon DioxideSettore GEO/08 - Geochimica E VulcanologiachemistryCarbon dioxideMeteoric waterEnvironmental scienceSeawaterMineral Waters
researchProduct

Biotrickling filter modeling for styrene abatement. Part 2: Simulating a two-phase partitioning bioreactor.

2017

Abstract A dynamic model describing styrene abatement was developed for a two-phase partitioning bioreactor operated as a biotrickling filter (TPPB-BTF). The model was built as a coupled set of two different systems of partial differential equations depending on whether an irrigation or a non-irrigation period was simulated. The maximum growth rate was previously calibrated from a conventional BTF treating styrene (Part 1). The model was extended to simulate the TPPB-BTF based on the hypothesis that the main change associated with the non-aqueous phase is the modification of the pollutant properties in the liquid phase. The three phases considered were gas, a water–silicone liquid mixture, …

Environmental EngineeringMaterials scienceHealth Toxicology and MutagenesiseducationBiotrickling filter02 engineering and technology010501 environmental sciencesThermal diffusivity01 natural sciencesTwo-phase partitioning bioreactor.Styrene:Enginyeria química::Química del medi ambient::Química atmosfèrica [Àrees temàtiques de la UPC]Filter (large eddy simulation)chemistry.chemical_compoundBioreactorsSilicone oilMass transferPhase (matter)Air PollutionCalibrationBioreactorEnvironmental ChemistryGases - PurificationEnvironmental Restoration and RemediationStyrene0105 earth and related environmental sciencesMass transfer coefficientWater PollutionPublic Health Environmental and Occupational HealthEnvironmental engineeringGeneral MedicineGeneral ChemistryMechanicsModels Theoretical021001 nanoscience & nanotechnologyPollutionGasos - DepuracióBiodegradation EnvironmentalchemistryModels ChemicalBiofilmsMathematical modelingBiological air treatment0210 nano-technologyFiltrationChemosphere
researchProduct

Research on ecological design to enhance comfort in open spaces of a city (Valencia, Spain). Utility of the physiological equivalent temperature (PET)

2013

For many years now, research has focused on issues concerning making cities easier to live in and some of the most important of these concern climatology and thermal comfort issues. There is also a growing awareness of the importance of open spaces and green areas, as key elements in providing opportunities for human interaction, leisure and physical exercise. They are important for all inhabitants, but particularly so for children and the elderly population. Of especial interest are the studies which have examined the interaction of comfort with the urban climate. This issue was studied throughout the twentieth century, but recently the role which can be played by biometeorological indices…

Environmental EngineeringMeteorologyCONSTRUCCIONES ARQUITECTONICASEquivalent temperatureUrban designThermal comfortPhysiologically equivalent temperatura (PET)Management Monitoring Policy and LawEcological urban planningHuman biometeorologyGeographyEcological designNeed to knowReflexivityUrban climateOutdoor termal confortUrban climateEnvironmental impact assessmentEnvironmental planningNature and Landscape ConservationEcological Engineering
researchProduct

Evaluation of a microclimate model for predicting the thermal behavior of different ground surfaces

2013

The microclimate model ENVI-met Version 4 was evaluated with field data in terms of the thermal behavior of different types of ground surface. A field experiment was conducted in a real construction project in Guangzhou, South China, from 29 August to 2 September in 2010. The surface types of concrete, tile, asphalt and grass were investigated. The comparison between observation and prediction was performed for both sub- and above-surface variables, including soil temperature at different depths, soil heat flux at the surface, surface temperature, and air temperature and humidity at different heights. The results show that the ENVI-met model is capable of reasonably modelling the diurnal th…

Environmental EngineeringMeteorologyField experimentGeography Planning and DevelopmentMicroclimateHumidityPoison controlBuilding and ConstructionAtmospheric sciencesTypes of concreteAsphaltvisual_artThermalvisual_art.visual_art_mediumEnvironmental scienceTileCivil and Structural EngineeringBuilding and Environment
researchProduct

Assessing the effectiveness of green roofs in enhancing the energy and indoor comfort resilience of urban buildings to climate change: Methodology pr…

2021

Abstract The effects of climate change on the built environment represents an important research challenge. Today, green roofs (GRs) represent a viable solution for enhancing energy and urban resilience in the face of climate change, as they can have a positive impact on the building's indoor thermal comfort and energy demand, as well as inducing various environmental benefits (easing urban heat island effects, improving the management of runoff water, reducing air pollution, etc.). Thus, it is important to be able to assess their effectiveness, both today and under future climate conditions, in order to evaluate whether they can also provide a valid long-term solution. In this paper, a sim…

Environmental EngineeringSettore ING-IND/11 - Fisica Tecnica Ambientalebusiness.industryGeography Planning and DevelopmentEnvironmental resource managementAir pollutionClimate changeThermal comfortBuilding and Constructionmedicine.disease_causeEffects of global warmingmedicineEnvironmental scienceClimate change adaptation Energy building simulation Energy savings Green roofs Indoor thermal comfort Urban buildings resilienceUrban heat islandbusinessResilience (network)Urban resilienceBuilt environmentCivil and Structural Engineering
researchProduct

Comparative analysis of the thermal insulation performance of a façade enclosure integrated by vegetation under simultaneous windy and rainy climatic…

2023

The literature offers some studies on the capacity of the greenery apparatus to decrease wind speed and regulate temperatures with the combination of the moisture retained by the plants and the air passing through them, but there is little on the maintenance of performance under particular weather conditions. The aim of this contri- bution is to verify the effectiveness of a vegetal façade in particularly windy conditions combined with rainy and/or high-irradiation events. The subject of the study is the enclosure of the Technology Innovation Centre for Development (itdUPM), on the Polytechnic University of Madrid, where a green wall prototype has been installed. For the purposes of the ana…

Environmental EngineeringSustainable solutionsSettore SECS-S/02 - Statistica Per La Ricerca Sperimentale E TecnologicaGeography Planning and DevelopmentThermal performanceBuilding and ConstructionBuilding integrated vegetationSettore SECS-S/01 - StatisticaSettore ICAR/12 - Tecnologia Dell'ArchitetturaCivil and Structural EngineeringGreen wall
researchProduct

Variation in spawning time promotes genetic variability in population responses to environmental change in a marine fish.

2015

Common-garden experiments suggest that the response of Atlantic cod larvae to temperature differs among populations that spawn at different times of year. Populations appear to be adapted to the temperatures experienced during the larval stage at a small spatial scale, despite a lack of physical barriers to gene flow.

Environmental changePhysiologyPopulationManagement Monitoring Policy and LawBiologythermal adaptationGenetic variation14. Life underwaterGenetic variabilityGene–environment interactioneducationcommon-garden experimentNature and Landscape Conservationeducation.field_of_studyPhenotypic plasticityEcologyEcological Modelingfungiclimate changeGadus morhua13. Climate actionAtlantic codSpatial ecologySpatial variabilitygenotype-by-environment interactionResearch ArticleConservation physiology
researchProduct

Comparison of thermal expansion of wood and epoxy adhesives

2002

Epoxy-based adhesives are used both in the consolidation of decayed timbers and for new structural joints. Investigating the compatibility of wood and epoxy adhesives provides a better knowledge of the long-term behaviour of wood-epoxy joints. Besides mechanical compatibility, also temperature-related parameters are relevant in this context. The values of the thermal expansion coefficients (TEC) of two wood species (Spruce, Picea abies and Iroko, Clorophora excelsa) and four different epoxy resins have been compared using a modified test method that allows for nearly iso-hygric conditions of the wood specimens. Minor differences in TEC have been observed between wood in the transversal-to-t…

Epoxy adhesiveMaterials scienceTECtechnology industry and agricultureForestryTest methodEpoxyThermal expansionvisual_artCompatibility (mechanics)visual_art.visual_art_mediumGeneral Materials ScienceAdhesiveMaterials Science (all)Composite material
researchProduct