Search results for "Titan"
showing 10 items of 1109 documents
Corrosion resistance of the vacuum arc deposited Ti, TiN and TiO2 coatings on large area glass substrates
2000
An industrial installation for vacuum arc deposition is presented. Its potential in the field of decorative coatings for large area glass sheets is demonstrated. In particular it is possible to deposit patterned coatings through a polymeric textile mask. The ability to deposit uniform multilayer coatings having interference colours onto large silicate glass sheets is shown. Titanium, titanium nitride and titanium dioxide coatings on silicate glass have been characterized in terms of composition and corrosion resistance. Depth profiling was achieved with the aid of Auger electron spectroscopy. The corrosion resistance of TiN coatings is higher than that of TiO 2 . The corrosion resistance of…
SEM and XPS studies of titanium dioxide thin films grown by MOCVD
1998
Abstract The metal organic chemical vapour deposition (MOCVD) method was used to prepare titanium dioxide thin films. Thin films of TiO2, about 100 nm thick, were deposited on (100)Si and (1102)Al2O3 sapphire substrates using titanium isopropoxide (Ti(OC3H7)4) as metal organic precursor. The morphology of the films and the presence of impurities on the thin films surfaces were studied using respectively, scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). The influence of the growth parameters such as the deposition temperature, the carrier gas (nitrogen) flow rate and the presence of an additional oxygen flow on the characteristics of the titanium dioxide films h…
The Effect of Building Direction on Microstructure and Microhardness during Selective Laser Melting of Ti6Al4V Titanium Alloy
2021
AbstractDuring the last few years, additive manufacturing has been more and more extensively used in several industries, especially in the aerospace and medical device fields, to produce Ti6Al4V titanium alloy parts. During the Selective Laser Melting (SLM) process, the heterogeneity of finished product is strictly connected to the scan strategies and the building direction. An optimal managing of the latter parameters allows to better control and defines the final mechanical and metallurgical properties of parts. Acting on the building direction it is also possible to optimize the critical support structure. In particular, more support structures are needed for the sample at 0°, while very…
Enhanced surface area in thermally stable pure mesoporous TiO2
2000
Abstract We describe here for the first time the surfactant-assisted synthesis of thermally stable mesoporous pure TiO 2 having a high surface area. Our synthetic approach to the chemistry of this system is based on the equilibrium between the hydrolysis and condensation reactions of the inorganic species and the organic–inorganic self-assembling processes. The use of titanatrane complexes helps to retard the hydrolysis and condensation reactions, thus allowing us to overcome the difficulties in preparing titanium dioxide mesoporous materials starting from highly reactive Ti-alkoxides. The mesoporous material has been characterized by TEM, XRD and N 2 adsorption–desorption isotherms and dis…
Comparative study of polar perovskite surfaces
2004
A novel model of the ‘‘zig–zag’’ (1 1 0) polar surface termination of ABO3 perovskites is suggested and analyzed. Classical shell model calculations for BaTiO3, SrTiO3 and LaMnO3 show that such the (1 · 2) (1 1 0) surface reconstruction has the lowest energy, comparable to that for the (1 0 0) surfaces. The calculated surface energy reaches the saturation only when 6–8 atomic near-surface planes are allowed to relax. Surface relaxation leads to the formation of considerable dipole moment perpendicular to the surface. The predicted surface polarization of thin perovskite films, even in the cubic phase, could affect their dielectric properties. � 2004 Elsevier B.V. All rights reserved.
Low-temperature Ti-containing 3:2 and 2:1 mullite nanocrystals from single-phase gels
2007
Abstract TiO 2 -containig single-phase gels with (Al 2 O 3 + TiO 2 )/(SiO 2 ) molar ratios 3/2 and 2/1 were prepared by gelling mixtures of aluminium nitrate, tetraethylorthosilicate and titanium isopropoxide. Gels were fast heated at several temperatures up to 1100 °C. Dried and heated gels were characterized by differential thermal analysis (DTA), magic angle spinning nuclear magnetic resonance (MAS-NMR), X-ray powder diffraction (XRD), and scanning and transmission electron microscopies (SEM and TEM). Coupled DTA and XRD results of gels fast heated at 900 °C showed the crystallisation of two mullites as well as a small amount of alumina-silica spinel. 27 Al NMR spectra showed the format…
N-TiO2 Photocatalysts highly active under visible irradiation for NOX abatement and 2-propanol oxidation
2013
N-doped TiO2 powders were prepared by two different sol-gel methods. Samples were characterised by X-ray diffraction (XRD), BET specific surface area measurements (SSA), scanning electron microscopy (SEM), diffuse reflectance spectroscopy (DRS), X-ray photoelectron spectroscopy (XPS) and Electron Paramagnetic Resonance (EPR). XPS measurements revealed a signal at 400 eV assignable to nitrogen in the form of Ti-N-O. EPR signals are attributed to molecular NO trapped with cavities/defects possibly interacting with oxygen vacancies. The photocatalytic activity under UV and visible light was determined following the abatement of NOx and the photodegradation of 2-propanol in gas-solid systems. N…
Thermal stability of Au–TiO2 nanocomposite films prepared by direct liquid injection CVD
2015
Abstract Nanocomposite films composed of gold nanoparticles (AuNPs) embedded in a TiO 2 matrix have been prepared by direct liquid injection chemical vapor deposition process, using preformed nanoparticles and titanium isopropoxide as precursors. The spherical AuNPs about 4.1 nm in diameter were synthesized by using gold (III) chloride trihydrate and stabilized by thiol ligands. The depositions were carried out by performing at first oxide deposition, then gold nanoparticle one and capping with oxide. The morphology, structure; the chemical state and optical properties of nanocomposite films were characterized by scanning electron microscopy, Raman, X-ray photoelectron and UV–Vis absorption…
Growth and Electrical Characterization of Horizontally Aligned CNTs
2009
Nickel catalyst nanoparticles acting as nucleating seeds for carbon nanotube (CNT) growth were selectively deposited on the sidewalls of titanium nitride (TiN) electrodes by electrochemical deposition (ECD) from a Ni2+ electrolyte solution. Horizontal aligned CNTs were grown selectively from the sidewalls of these TiN electrodes forming a bridging CNT contact between the electrode gaps. Current-voltage measurements demonstrated this could be a promising technique towards nanoscale interconnections and nanoelectronic devices with resistance values for the bridging CNTs as low as 300Ω.
Synthesis and physico-chemical characterization of Au/TiO2 nanostructures formed by novel "cold" and "hot" nanosoldering of Au and TiO2 nanoparticles…
2011
Abstract A novel approach to synthesize Au/TiO2 nanostructures with interesting optical properties is presented and discussed. It is based on the nanoparticle “cold” or “hot” nanosoldering occurring when two water suspensions of Au and TiO2 nanoparticles are merely mixed at room temperature or laser irradiated after mixing. Thanks to the high fraction and mutual reactivity of surface species, immediately after the mixing process, the encounters between Au and TiO2 nanoparticles in liquid phase are enough for “cold” nanosoldering of gold nanoparticles onto TiO2 nanoparticles to occur. The optical characterizations show that this fast process (timescale less than 1 min) is followed by a slowe…