Search results for "Titanium"
showing 10 items of 878 documents
Function of titanium oxide coated on carbon nanotubes as support for platinum catalysts
2015
This study describes the outcome of the synthesis of laboratory-made (HM) Pt monometallic, binary and ternary catalysts supported on TiO2/CNT (carbon nanotubes) and based on using the dry-mix method of organometallic chemical vapor deposition (OMCVD). These multicomponent catalysts were investigated and compared with commercial Johnson Matthey (JM) catalysts for electrochemical applications.
Molybdenum thin-film growth on rutile titanium dioxide ()
2002
Molybdenum films were deposited at room temperature on rutile TiO2(1 1 0) surfaces having different stoichiometries, surface roughnesses and crystallinities. The film structures and compositions and the substrate–film interfaces were investigated by X-ray diffraction, high-resolution transmission electron microscopy and energy-dispersive X-ray spectroscopy. Different substrate pretreatments resulted in markedly different film and interface structures. Under the growth conditions studied, no amorphous molybdenum oxide interlayers were formed upon deposition in contrast to previous studies. Preferred (1 1 0) textured Mo films grew on both air-annealed and oxygen-bombarded substrates. While sh…
Soft Tissue Healing at One-Piece Zirconia Implants Compared to Titanium and PEEK Implants of Identical Design: A Histomorphometric Study in the Dog
2013
This study aimed to histomorphometrically evaluate the soft tissue reactions of one-piece zirconia implants versus titanium implants in regard to their insertion depth. Four one-piece implants of identical geometry were inserted on each side of six mongrel dogs: an uncoated zirconia implant, a zirconia implant coated with a calcium liberating titanium oxide, a titanium implant, and an experimental implant made of a synthetic material. Using a split-mouth design, they were inserted in both submerged and nonsubmerged healing modes. After 4 months, dissected blocks were stained with toluidine blue to histologically assess the marginal portion of the implant mucosa, apical extension of the barr…
Microstructural and tribological study of Nd:YAG laser treated titanium plates.
2008
Abstract In this work, the fretting behaviour of pure Ti plates laser treated with a Nd:YAG pulsed laser was compared to that of untreated Ti plates. Fretting tests were done at room temperature without lubrication. The contact geometry was a cylinder (bearing steel) on a plane. The evolution of both the ratio, μ = Q / P , between the normal and the tangential forces, and the Fouvry's energy criterion ( A ) were recorded as a function of the number of fretting cycles, N . Energy dispersive spectrometry and micro-Raman spectroscopy were used to analyse the fretting scars. The oxidized layer formed by the laser treatment displayed a mixed slip regime as a function of N , and a smaller frettin…
Influence of the composition of titanium oxynitride layers on the fretting behavior of functionalized titanium substrates: PVD films versus surface l…
2014
International audience; Abstract In this work we compared the fretting behavior of pure titanium plates functionalized with titanium oxynitride surface layers, obtained by two methods: a Physical Vapor Deposition (PVD) method, reactive magnetron sputtering, and Surface Laser Treatments (SLT), under different mixtures of oxygen and nitrogen. The composition of the layers was determined by nuclear reaction analysis (NRA) and their structure was analyzed by Raman spectroscopy. PVD layers were TiN-like fcc layers, with an oxygen concentration going from 36 to 50 at.%. Three SLT layers were studied. The first one was a TiN-like layer containing ~28 at.% of oxygen. The second one was formed of di…
High-Temperature Stable Gold Nanoparticle Catalysts for Application under Severe Conditions: The Role of TiO2 Nanodomains in Structure and Activity
2015
Metal nanoparticles with precisely controlled size are highly attractive for heterogeneous catalysis. However, their poor thermal stability remains a major concern in their application at realistic operating conditions. This paper demonstrates the possibility of synthesizing gold nanoparticles with exceptional thermal stability. This has been achieved by using a simple conventional deposition–precipitation technique. The material employed as catalyst consists of gold supported on a TiO2-impregnated SiO2 bimodal mesoporous support. The resulting material shows gold nanoparticles with a narrow size distribution around 3.0 nm, homogeneously dispersed over the TiO2/SiO2 material. Most interesti…
Electrochemical Behaviour and Galvanic Effects of Titanium Implants Coupled to Metallic Suprastructures in Artificial Saliva
2018
The aim of the present study is to analyze the electrochemical behavior of five different dental alloys: two cobalt-chromium alloys (CoCr and CoCr-c), one nickel-chromium-titanium alloy (NiCrTi), one gold-palladium alloy (Au), and one titanium alloy (Ti6Al4V), and the galvanic effect when they are coupled to titanium implants (TiG2). It was carried out by electrochemical techniques (open circuit measurements, potentiodynamic curves and Zero-Resistance Ammetry) in artificial saliva (AS), with and without fluorides in different acidic conditions. The studied alloys are spontaneously passivated, but NiCrTi alloy has a very narrow passive domain and losses its passivity in presence of fluorides…
Role of TiO2 in Highly Efficient Solar Cells
2021
Titanium dioxide (TiO2) is a naturally occurring oxide of titanium. It has a wide range of applications. It has three metastable phases, which can be synthesized easily by chemical routes. Usage of TiO2 in thin-film solar cells has gained much attention in increasing the performance of the cell. The objectives are to harvest the freely available earth’s energy and to gain expertise in yielding a maximum conversion efficiency. Various strategies are employed to face the challenges in improving the efficiency of solar cells. This study provides a broad view of the usage of different forms of TiO2 layers, like nanochannel, porous, nanotubes, and mesoporous layers, in enhancing electron injecti…
Effects of weathering on the performance of self-cleaning photocatalytic paints
2019
Abstract The use of photocatalytic products for the surface coating of buildings is spreading more and more, because of the reduction of atmospheric pollutants and the colour maintenance of the paints over time with reduction of the maintenance costs and the improvement of the aesthetic appearance. The study reports the evaluation of the effects of the atmospheric conditions on three commercial photocatalytic paints containing TiO2. In particular tests were carried out by using samples subjected to accelerated aging inside a climate chamber and naturally aged by exposure for two years to the external environment of the city of Palermo (representative of a coastal environment of the Mediterr…
Effect of retention design of artificial teeth and implant-supported titanium CAD-CAM structures on fracture resistance
2014
Background For implant-supported hybrid prostheses, high mastication forces and reduced acrylic resin thickness over a metal substructure often cause failures arising from tooth or resin fractures. To assay fracture resistance of artificial teeth and resin in implant-supported hybrid prostheses in relation to the titanium structure and retention design supporting teeth. Material and Methods 40 specimens bearing incisors were divided into four groups according to the titanium structure supporting the teeth and the type of load force applied: Group I (Control; n=10): Application of static loading to ten incisors set over a metal structure with internal retention. Group II (Control; n=10): App…