Search results for "Toughness"
showing 10 items of 105 documents
Evaluation of thin film adhesion to a compliant substrate by the analysis of progressive buckling in the fragmentation test
2009
The interface toughness of a thin coating/compliant substrate system is estimated based on the evolution of coating buckle patterns in the fragmentation test. The linear density of coating buckles as a function of applied strain is determined experimentally for a SiOx coating deposited on a polyethylene terephthalate film. A three-dimensional non-linear finite element model is developed to simulate the process of buckle formation in a single narrow coating strip. The elastic energy released during buckling-driven delamination is obtained from the energy balance in the system before and after the buckling event. Both the interface adhesion and the total energy release rate, which includes th…
Stress, angst og selvtillit hos topphåndballspillere i kampsituasjon : En kartlegging av før-konkurranseangst sammenlignet med spillernes mentale tøf…
2017
Masteroppgave idrettsvitenskap ME517 - Universitetet i Agder 2017 The purpose of this study was to establish pre-competition anxiety, self-confidence and mental toughness among high level handball players before matches during the handball season. The development of pre-competition anxiety and self-confidence before the matches was compared between two different teams and compared between players scoring high and low on mental toughness. Pre-competition anxiety and self-confidence was measured using the questionnaire CSAI-2 and mental toughness was measured using the questionnaire SMTQ. The participants was 34 female handball-players, recruited from two teams playing in the Norwegian nation…
Mental Toughness Moderates Social Loafing in Cycle Time-Trial Performance
2016
The purpose of this study was to determine if mental toughness moderated the occurrence of social loafing in cycle time-trial performance.Twenty-seven men (Mage = 17.7 years, SD = 0.6) completed the Sport Mental Toughness Questionnaire prior to completing a 1-min cycling trial under 2 conditions: once with individual performance identified, and once in a group with individual performance not identified. Using a median split of the mental toughness index, participants were divided into high and low mental toughness groups. Cycling distance was compared using a 2 (trial) × 2 (high-low mental toughness) analysis of variance. We hypothesized that mentally tough participants would perform equall…
Age, training, and previous experience predict race performance in long-distance inline skaters, not anthropometry
2012
Knechtle, Beat | Knechtle, Patrizia | Ruest, Christoph Alexander | Rosemann, Thomas | Lepers, Romuald; International audience; ''The association of characteristics of anthropometry, training, and previous experience with race time in 84 recreational, long-distance, inline skaters at the longest inline marathon in Europe (111 km), the Inline One-eleven in Switzerland, was investigated to identify predictor variables for performance. Age, duration per training unit, and personal best time were the only three variables related to race time in a multiple regression, while none of the 16 anthropometric variables were related. Anthropometric characteristics seem to be of no importance for a fast …
Physical properties of green composites based on poly-lactic acid or Mater-Bi® filled with Posidonia Oceanica leaves
2018
Abstract This work focuses on the evaluation of Posidonia Oceanica leaves as effective reinforcing agent for ecofriendly, fully biodegradable polymer composites. Posidonia leaves were washed, ground and sieved in order to achieve two different size distributions and aspect ratios. They were then added to either a stiff or a ductile biodegradable polymer matrix, respectively poly-lactic acid (PLA) and MaterBi® (MB), at two different filler contents (10 wt% and 20 wt%). The materials were fully characterized from a spectroscopic, morphological, rheological, and mechanical point of view. In particular, the outcomes of tensile tests were statistically analyzed by using a Full Factorial Design i…
Infrared Thermography assisted evaluation of static and fatigue Mode II fracture toughness in FRP composites
2019
Abstract The work proposes the combined use of a Modified Transverse Crack Tension (MTCT) test coupon and Infrared Thermography, to evaluate the static and fatigue behaviour of Fibre Reinforced Polymer composites under Mode II delamination. Artificial delaminations starters are added to the TCT coupon, whose effects on the Strain Energy Release Rate are discussed. Infrared Thermography and Thermoelastic Stress Analysis are implemented to investigate stresses and delaminations growths on two FRP materials: a pre-preg IM7/8552 carbon fibre-epoxy and a glass-fibre reinforced epoxy laminates. The thermographic, thermoelastic and second harmonic signals have been obtained and used to monitor the…
Thermoelastic Stress Analysis of modified Transverse Cut Tensile composite specimens under pure Mode II fatigue delamination
2018
The present work investigates the behaviour of a Transvers Crack Tensile (TCT) specimen undergoing fatigue loading, by means of a Thermoelastic Stress Analysis (TSA) experimental setup. The TCT is a tensile composite specimen where a number of internal layers are cut through the beam width. The presence of such transverse notch favours the formation of interlaminar Mode II delaminations, starting from the notch tips and propagating between the cut and continuous plies. In this work, a modification is adopted to the classic TCT specimen, where insert films, mimicking artificial delaminations, are laid across the notch tips. This is done with the purpose to favour a pure Mode II and a symmetr…
Fracture toughness of synthesised high-performance epoxies subject to accelerated water aging
2018
Abstract The effects of water uptake on the fracture toughness of epoxy systems with high glass-transition temperatures (Tg above 170 °C) are investigated. Aging conditioning has been conducted in hot water, followed by a desorption conditioning in a room temperature dry-airborne. Water aging determines plasticisation effects and crosslink-density modifications, revealed by reductions of the Tg. It is less known how such modifications influence the material fracture toughness. In this study, Single Edge Notched Bending samples have been tested according to standards, to evaluate the KIC fracture toughness at different stages of water absorption-desorption. The characterisation has been supp…
Moisture Absorption Effects on the Resistance to Interlaminar Fracture of Woven Glass/Epoxy Composite Laminates
2012
The influence of moisture absorption on the interlaminar fracture behaviour of 8/8 harness satin weave glass/epoxy composite was investigated. Two series of specimens with 0°/0° and 90°/90° predominant interfaces immersed in water for different duration were tested under double cantilever beam (DCB mode I), single leg bending (SLB mode I + II) and end notched flexural (ENF mode II) loadings. In general, the apparent flexural modulus: E, and the fracture toughness: G C, decrease with increasing moisture content. This effect is more remarkable if mode II participation is bigger. The value of G C measured on 90°/90° specimens reveals higher than that on 0°/0° ones, but the variation in G C is …
Mechanical properties of steel fibre reinforced lightweight concrete with pumice stone or expanded clay aggregates
2001
This paper presents basic information on the mechanical properties of steel fibre-reinforced light-weight concrete, manufactured using pumice stone or expanded clay aggregates. Results are presented for standard compressive tests and indirect tensile tests (splitting tests on cylinder specimens and flexure tests on prismatic beams using a three-point loading arrangement) under monotonically increasing or cyclically varying loads. The influence of steel fibres and aggregate types on modulus of elasticity, compressive and tensile strength and post-peak behaviour is evaluated. Test results show that compressive strength does not change for pumice stone aggregates, while an increase is observed…