Search results for "Transform"
showing 10 items of 3975 documents
A DC current transformer for large bandwidth and high common-mode rejection
1999
A review of known magnetic-coupled current-sensing techniques is presented, Subsequently, a novel technique is introduced, based on a configuration discussed in a previous paper. The previous technique made use of a galvanomagnetic device (Hall effect sensor) to sense the magnetization of a current transformer core, so that the sum of the Hall voltage and the voltage across the secondary shunt resistor would yield a faithful copy of the input current. The technique described in this paper makes use of the same principle to obtain a high bandwidth (from DC to 1 MHz) and very high common-mode rejection current transformer, without the need for a Hall effect probe. This is achieved by subtract…
Stress separation in the photoelastic study of centrifugal stresses
1972
This technical note refers to the problem of stress separation in the photoelastic analysis of plane models under centrifugal stresses. Two methods are described in order to determine the sum of principal stresses. These methods, which are based on the compatibility equation, reduce the determination of the sum of principal stresses to the solution of a Laplace's or Poisson's equations. As an example of application, the separation of stresses in a rotating disk with two eccentric holes is shown and comparison with the stresses obtained by using the shear-difference method is made.
A boundary element model for structural health monitoring using piezoelectric transducers
2013
In this paper, for the first time, the boundary element method (BEM) is used for modelling smart structures instrumented with piezoelectric actuators and sensors. The host structure and its cracks are formulated with the 3D dual boundary element method (DBEM), and the modelling of the piezoelectric transducers implements a 3D semi-analytical finite element approach. The elastodynamic analysis of the structure is performed in the Laplace domain and the time history is obtained by inverse Laplace transform. The sensor signals obtained from BEM simulations show excellent agreement with those from finite element modelling simulations and experiments. This work provides an alternative methodolog…
Feasibility issues in static output-feedback controller design with application to structural vibration control
2014
Recent results in output-feedback controller design make possible an efficient computation of static output-feedback controllers by solving a single-step LMI optimization problem. This new design strategy is based on a simple transformation of variables, and it has been applied in the field of vibration control of large structures with positive results. There are, however, some feasibility problems that can compromise the effectiveness and applicability of the new approach. In this paper, we present some relevant properties of the variable transformations that allow devising an effective procedure to deal with these feasibility issues. The proposed procedure is applied in designing a static…
A portable instrument for the location and identification of defects generating PD
2011
A portable instrument based on an antenna probe and suitable for partial discharge detection, have been characterized through both laboratory and on-site experiments carried out on coils and stator windings of ac rotating machines. The antenna probe allows the capture of electromagnetic waves in a bandwidth of 0.1–100 MHz. Pulse signals and ac supply voltage reference are obtained by means of high-pass and low-pass filters, respectively, so avoiding the need of a direct connection with the objects under test. By this way, real-time phase resolved partial discharge patterns can be derived. Results of a comparison of the diagnostic information provided by PD patterns due to conducted and irra…
Use of Automated Photoelasticity to Determine Stress Intensity Factors of Bimaterial Joints
2005
A new systematic experimental procedure has been developed to obtain the stress intensity factors governing the singular stress field that occurs near the intersection between the interface and free edges of bimaterial joints. A preliminary theoretical study of the singular stress field is carried out by the well-known Airy stress function method. The obtained stress laws are properly combined with the basic law of photoelasticity in order to define a procedure that permits the zone dominated by the singularity to be located and the stress intensity factors (SIFs) to be computed on the basis of full field data provided from automated photoelasticity. In particular, a systematic error analys…
On the use of narrow band power line as communication technology for medium and low voltage smart grids
2012
The aim of this work is to perform a feasibility study on the power line communication for the development of a new generation of interface devices (IDs) for smart grid applications. More in detail, this paper deals with one of the most important issues on this topic which is the communication system. Among the existing communication technologies, the study is focused on power line communications (PLCs). After a analysis of the state of the art in the field, the main aspects are analyzed, concerning the open issues on the use of PLCs, especially for medium voltage (MV) and low voltage (LV) systems. In this work the use of PLC in MV-LV networks is investigated, by means of simulations and ex…
The analysis and selection of the spinning disk system parameters for the measurement of static electrification of insulation oils
2007
The paper presents results the aim of which was determining the most favorable conditions of ECT (electrostatic charge tendency) measurement taking of insulation oils in the spinning disk system. The work proved that a proper selection of the size and roughness of the disk surface makes the measured volume density of charge qw independent of the hydrodynamic conditions in the measuring system on the solid and liquid phase border. Charge qw density meets then the criterion of a material coefficient and can be used for comparing the results obtained from the systems varying in dimensions and hydrodynamic conditions. The changes suggested also ensure a high repeatability and reproducibility of…
2D harmonic analysis of the cogging torque in synchronous permanent magnet machines
2004
Presents an approach to determine sources of cogging torque harmonics in permanent magnet electrical machines on the basis of variations of air‐gap magnetic flux density with time and space. The magnetic flux density is determined from the two‐dimensional (2D) finite element model and decomposed into the double Fourier series through the 2D fast Fourier transform (FFT). The real trigonometric form of the Fourier series is used for the purpose to identify those space and time harmonics of magnetic flux density whose involvement in the cogging torque is the greatest relative contribution. Carries out calculations for a symmetric permanent magnet brushless machine for several rotor eccentricit…
An induction motor speed measurement method based on current harmonic analysis with the Chirp-Z Transform
2005
This paper presents a new method to measure motor speed by means of frequency estimation of rotor slot spectral components in the supply current of squirrel single-cage induction motors. The novelty of the method consists in the harmonic analysis of the supply current by means of the chirp-Z transform (CZT). The advantages are improved accuracy due to better spectral resolution and resolvability. Moreover, a shorter observation window is required, thus reducing errors related to nonstationary current signals. The experimental results are presented to validate the proposed method and to make a comparison with a similar method based on the fast Fourier transform (FFT).