Search results for "Transformation"
showing 10 items of 1634 documents
Investigation of eutectic transformation of Zn−Al alloy by DTA
1995
The paper discusses the investigation of crystallization of metals and alloys by differential thermal analysis (DTA). It was assumed that this method allows determination of the mechanism and kinetics of volumetric crystallization underiso conditions (e.g. anisothermal) on the basis of the parameters of the equation expressing an integral form of the DTA curve. From DTA, a course of eutectic transformation was determined for a technical Zn−Al alloy containing 4wt% Al. Investigations were carried out under continuous cooling at various rates and the kinetics parameters were determined with the KEKAM equation:-ln(1-x)=kln
Radiation effects on stress evolution and dimensional stability of large fusion energy structures
2021
Abstract We assess the effects of neutron irradiation on the deformation and stress evolution of large-scale fusion energy structures. This is accomplished through non-linear finite element structural analysis of the coupled thermal and mechanical fields at the Beginning-Of-Life (BOL), at 45 dpa, and at 90 dpa. Radiation effects include volumetric swelling and the influence of radiation on the mechanical properties. The system studied here is a large section of a full inboard module of an integrated structure comprising the First Wall and Blanket (FW/B) of a Dual Cooled Lithium-Lead (DCLL) energy conversion unit in the Fusion Nuclear Science Facility (FNSF). The structural material is the f…
Structural and Magnetic Properties of Epitaxial Ni<sub>2</sub>MnGa Thin Films
2009
We report on the preparation and investigation of epitaxial thin films of the magnetic shape memory alloy Ni2MnGa. For samples close to the stoichiometric composition we find that the phase transformation temperature is affected by the crystallographic orientation. Changes in the crystal structure due to the transformation are observed using temperature-dependent X-ray diffraction. Films with higher manganese content are in the martensitic state at room temperature. Those samples on Al2O3(11-20) reveal the 7-layered orthorhombic structure that allows strains up to 10 %. To avoid blocking of magnetostrictive effects by the substrate, free-standing films are prepared using water-soluble NaCl(…
Optimizing Energy Transduction of Fluctuating Signals with Nanofluidic Diodes and Load Capacitors
2018
[EN] The design and experimental implementation of hybrid circuits is considered allowing charge transfer and energy conversion between nanofluidic diodes in aqueous ionic solutions and conventional electronic elements such as capacitors. The fundamental concepts involved are reviewed for the case of fluctuating zero-average external potentials acting on single pore and multipore membranes. This problem is relevant to electrochemical energy conversion and storage, the stimulus-response characteristics of nanosensors and actuators, and the estimation of the accumulative effects caused by external signals on biological ion channels. Half-wave and full-wave voltage doublers and quadruplers can…
The solidification behavior of a PBT/PET blend over a wide range of cooling rate
2009
In recent years, much attention has been paid to the development of high-performance polyester blends, among which blends of polybutylene terephthalate/polyethylene terephthalate (PBT/PET) are expected to exhibit remarkable properties as far as their crystallization behavior is concerned. Through trial and error, appropriate commercial compositions have been chosen which could not be otherwise explained by a suitable interpretation of the mechanisms determining their solidification behavior. The solidification behavior of a 60/40 w/w PBT/PET blend was studied in a wide range of cooling conditions, according to a continuous cooling transformation (CCT) procedure developed previously, aiming …
Relating morphology to nanoscale mechanical properties: from crystalline to mesomorphic iPP
2005
Abstract A nanoindentation technique using an atomic force microscope (AFM) was applied to characterize the mechanical behaviour of several isotactic polypropylene (iPP) samples. The samples were solidified from the melt with a CCT (continuous cooling transformation) procedure spanning a wide range of cooling rates thanks to a fast quenching apparatus developed by the authors. The influence of instrumental parameters on the nanoscale mechanical properties (indentation depth, Young's modulus) shows that for modulus determination one has to rely on simpler methods of force curve analysis based on trace curve alone. Structure homogeneity up to the scale of macroscopic samples used to evaluate …
Diamond Films as Support for Electrochemical Systems for Energy Conversion and Storage
2019
Many efforts have been dedicated to develop and study different catalysts supported materials for energy storage and conversion. Polymer electrolyte membranes (PEM) and capacitors have been topics of special interest for the scientific community, then, the research to find excellent catalyst-supports has constantly increased. The use of conductive diamond films has been proposed due to their mechanical and chemical stability properties. In this context, the application of BDD-catalyst surfaces for PEM fuel cells as well as the production of electrochemical capacitors using BDD materials have been summarized and discussed in this chapter.
Supramolecular Approach in Energy Conversion Devices
2020
This review summarizes investigations carried out at the Laboratory of Photochemistry and Energy Conversion (LFCE) in the University of Sao Paulo dealing with design and characterization of ruthenium(II), rhenium(I) and iridium(III) polypyridine complexes with desired photochemical and photophysical properties in light of the development of optoelectronics and photoinduced energy conversion systems. First, the breakthroughs on molecular engineering of emissive ReI, RuII and IrIII complexes for the development of highly efficient light-emitting devices, such as organic light-emitting diodes (OLEDs) and light-emitting electrochemical cells (LECs), are presented. Then, the photochemical and ph…
Influence of sol counter-ions on the visible light induced photocatalytic behaviour of TiO2 nanoparticles
2014
Titanium dioxide (TiO2) nanoparticles are attracting increasing interest because of their superior photocatalytic and antibacterial properties. Here, aqueous titanium oxy-hydroxide sols were made, using a green synthesis method, from the controlled hydrolysis/peptisation of titanium isopropoxide. Three different mineral acids were used to peptise the sol (HNO3, HBr and HCl), and provide counter-ions. The influence of nitrate or halide sol counter-ions on size distributions of the starting sols were measured via photon correlation spectroscopy (PCS). Semi-quantitative phase composition analysis (QPA), on the gels thermally treated at 450 and 600 degrees C, was carried out via Rietveld refine…
Prediction of phase transformation of Ti-6Al-4V titanium alloy during hot-forging processes using a numerical model
2013
In this article numerical model for prediction of phase evolution of Ti-6Al-4V titanium alloy was presented. In particular, attention was focused on alpha to beta and beta to alpha+beta phase transformations. The analysis was conducted using a commercial implicit finite element method code, considering the data and the parameters of a real case study to check the quality of the numerical model. The alpha to beta transformation was developed using the simplified form of the Avrami model and the beta to alpha+beta transformation was controlled through the generalized Avrami model. The model so-thought has been used to conduct a 2D simulation of a forging process. A comparison between the num…