Search results for "Transports"
showing 10 items of 485 documents
Comparison of numerical modelling techniques for impact investigation on a wind turbine blade
2019
Wind turbine blades are exposed to numerous impact risks throughout their lifetimes. The impact risks range from bird collisions during operation to impacts with surrounding structures at the time of transportation and installation. Impact loads on the fibre composite blades can induce several complex, simultaneously interacting and visually undetectable damage modes and have a high potential to reduce the local and global blade stiffness. An assessment of such impact-induced damages is therefore necessary and usually involves high computational costs using numerical procedures, especially when analysing large composite components. To minimise this computational expense, different numerical…
Numerical investigation of rain droplet impact on offshore wind turbine blades under different rainfall conditions: A parametric study
2020
The leading edge of a fiber composite wind turbine blade (WTB) is prone to erosion damages due to repeated rain droplet impact during its service life. Such damages are critical to the blade's aerodynamic as well as structural performance, ultimately resulting in substantial repair costs. An effective design of a coating material for WTB is necessary and its analysis must include variables associated with erosive rain droplets such as (1) droplet diameter, (2) impact velocity, and (3) droplet impact angle. The present paper develops and validates a coupled fluid structure interaction (FSI) computational model for simulating rain droplet impact on WTBs, where the structure domain is modelled…
Innovative straight formulation for plate in bending
2017
In this paper it has been introduced an innovative formulation for evaluating the deflection function of a simply supported plate loaded by uniformly distributed edge moments. Framed into Line Element-less Method, this formulation allows the evaluation of solution in terms of deflection, through few lines of algorithm implemented by Mathematica software without resorting to any discretization neither in the domain nor in the boundary. Interesting savings in terms of time and computational costs are achieved. Results obtained by the proposed method are well contrasted by ones obtained by classical methods and Finite Element Method.
Fractional-order nonlinear hereditariness of tendons and ligaments of the human knee
2020
In this paper the authors introduce a nonlinear model of fractional-order hereditariness used to capture experimental data obtained on human tendons of the knee. Creep and relaxation data on fibrous tissues have been obtained and fitted with logarithmic relations that correspond to power-laws with nonlinear dependence of the coefficients. The use of a proper nonlinear transform allows one to use Boltzmann superposition in the transformed variables yielding a fractional-order model for the nonlinear material hereditariness. The fundamental relations among the nonlinear creep and relaxation functions have been established, and the results from the equivalence relations have been contrasted wi…
Conceptualisation et classification des problèmes de fatigue mécanique
2011
International audience; On propose de conceptualiser et de classifier les problèmes de calcul de structures dits de fatigue (dans le cadre de la Mécanique de lʼEndommagement). Parce que le concept de fatigue est avant tout un concept que lʼon peut estimer structural plutôt que local, cette classification est faite dʼabord sur des grandeurs structurales. Ensuite, on donne une classification faite sur des grandeurs locales. Lʼobjectif de ces classifications est de favoriser la résolution locale des problèmes de fatigue dʼune classe donnée en aidant à la justification du passage des lois dʼévolution obtenues par la Thermodynamique à celles écrites dans le cadre de la fatigue.
Static strength and fatigue life of optimized hybrid single lap aluminum–CFRP structural joints
2017
Hybrid bolted/bonded joints are used to assemble structural components, commonly made by carbon fiber reinforced plastics (CFRP), with aluminum frames. Hence, they have become common solutions in a number of modern structural applications in the industrial fields, as well as civil constructions. Unfortunately, due to the lack of understanding of the relationships between the multiple parameters of influence that characterize their mechanical performance, only limited improvement have been achieved so far over classical bonding approaches, in terms of static and fatigue strength. As a result, further studies are needed in order to better exploit the potential of hybrid bolted/bonded joints a…
Infrared Thermography assisted evaluation of static and fatigue Mode II fracture toughness in FRP composites
2019
Abstract The work proposes the combined use of a Modified Transverse Crack Tension (MTCT) test coupon and Infrared Thermography, to evaluate the static and fatigue behaviour of Fibre Reinforced Polymer composites under Mode II delamination. Artificial delaminations starters are added to the TCT coupon, whose effects on the Strain Energy Release Rate are discussed. Infrared Thermography and Thermoelastic Stress Analysis are implemented to investigate stresses and delaminations growths on two FRP materials: a pre-preg IM7/8552 carbon fibre-epoxy and a glass-fibre reinforced epoxy laminates. The thermographic, thermoelastic and second harmonic signals have been obtained and used to monitor the…
Thermoelastic Stress Analysis of modified Transverse Cut Tensile composite specimens under pure Mode II fatigue delamination
2018
The present work investigates the behaviour of a Transvers Crack Tensile (TCT) specimen undergoing fatigue loading, by means of a Thermoelastic Stress Analysis (TSA) experimental setup. The TCT is a tensile composite specimen where a number of internal layers are cut through the beam width. The presence of such transverse notch favours the formation of interlaminar Mode II delaminations, starting from the notch tips and propagating between the cut and continuous plies. In this work, a modification is adopted to the classic TCT specimen, where insert films, mimicking artificial delaminations, are laid across the notch tips. This is done with the purpose to favour a pure Mode II and a symmetr…
Experimental design of the bearing performances of flax fiber reinforced epoxy composites by a failure map
2018
Abstract This paper represents the first effort aimed to the investigation of the pin/hole contact stress and failure mechanisms of epoxy composites reinforced with woven flax fabrics, underwent to tensile bearing tests. In particular, the maximum loads and failure modes are evaluated at varying the laminate geometrical configuration. In order to optimize the use of polymer composites reinforced with flax fibers in structural applications, an experimental failure map, identifying main failure modes of mechanically fastened joints, is obtained as function of hole diameter, distance of the hole from the free edge of the laminate and laminate width. Moreover, a theoretical approach based on th…
A new hyperelastic model for anisotropic hyperelastic materials with one fiber family
2016
International audience; The main goal of this study is to propose a practical application of a new family of transverse anisotropic invariants by designing a strain energy function (SEF) for incompressible fiber-reinforced materials. In order to validate the usability and creativeness of the proposed model, two different fiber-reinforced rubber materials under uniaxial and shear testing are considered. For each kind of material, numerical simulations based on the proposed model are consistent with experimental results and provide information about the effect of the new family of invariants in the construction of the SEF.