Search results for "Turin"

showing 10 items of 2664 documents

The different catalytic behaviour in the propane total oxidation of cobalt and manganese oxides prepared by a wet combustion procedure

2013

Abstract Cobalt oxide and manganese oxide catalysts have been prepared through aqueous synthesis using a wet combustion procedure. These materials have been tested as catalysts for the total oxidation of propane. It has been observed a different catalytic behaviour between cobalt and manganese oxides although for both oxides a very high catalytic activity has been obtained. Cobalt oxides prepared by the wet combustion procedure are less reactive than a simple cobalt oxide prepared without the addition of organic acids. However, in the case of manganese oxide the use of organic acids highly increases the catalytic activity. The different catalytic behaviour has been related to the variation …

inorganic chemicalsAqueous solutionChemistryGeneral Chemical EngineeringInorganic chemistrychemistry.chemical_elementGeneral ChemistryManganeseCombustionOxygenRedoxIndustrial and Manufacturing EngineeringCatalysisEnvironmental ChemistryCobalt oxideCobaltChemical Engineering Journal
researchProduct

AlTf-UVM-7—Highly active catalysts for the synthesis of long chain symmetrical ethers and non-ionic surfactant structures

2010

New Lewis acid AlTf-UVM-7 catalysts with bimodal pore system and different Si to Al ratios were prepared in a two-step synthesis in which triflic acid (Tf) was incorporated into previously synthesized mesoporous aluminum-containing silica. The Al incorporation inside the pore walls was carried out through the Atrane method. The characterization of the resulted catalysts showed that the triflic acid treatment step did not damage the texture or the structure of the catalysts. These materials were used as green catalysts for the etherification of fatty alcohols and the conversion of ethylene glycol (EG) with n-octanol resulting in mixtures of short ethoxylated structures with a large distribut…

inorganic chemicalsGeneral Chemical EngineeringGeneral ChemistryIndustrial and Manufacturing EngineeringCatalysischemistry.chemical_compoundchemistryPulmonary surfactantAtraneEnvironmental ChemistryOrganic chemistryLewis acids and basesMesoporous materialTriflic acidChemical compositionEthylene glycolChemical Engineering Journal
researchProduct

Porous clays heterostructures as supports of iron oxide for environmental catalysis

2018

[EN] Porous Clays Heterostructures (PCH) from natural pillared clays (bentonite with a high proportion of montmorillonite) have been used as supports of iron oxide for two reactions of environmental interest: i) the elimination of toluene (a representative compound of one of the most toxic subsets of volatile organic compounds, aromatics) by total oxidation and ii) the selective oxidation of H2S to elemental sulfur. For both reactions these catalysts have resulted to be remarkably more efficient than similar catalysts prepared using conventional silica as a support. Thus, in the total oxidation of toluene it has been observed that the catalytic activity obtained using siliceous PCH is two o…

inorganic chemicalsGeneral Chemical EngineeringInorganic chemistryIron oxidechemistry.chemical_element02 engineering and technology010402 general chemistry01 natural sciencesIndustrial and Manufacturing EngineeringCatalysischemistry.chemical_compoundH2S to STotal and selective oxidationIron oxideEnvironmental ChemistrySulfatePorous Clays Heterostructures (PCH)ChemistryVOCGeneral Chemistry021001 nanoscience & nanotechnologySulfurToluene0104 chemical sciencesMontmorilloniteBentonite0210 nano-technologySelectivityTolueneChemical Engineering Journal
researchProduct

Total oxidation of VOCs on Au nanoparticles anchored on Co doped mesoporous UVM-7 silica

2012

Abstract Gold deposited on a cobalt containing siliceous mesoporous structure, UVM-7, presents a good catalytic performance in the total oxidation of propane and toluene. The presence of both gold and cobalt is necessary as bimetallic Au/Co-UVM-7 catalysts are remarkably more active than monometallic Au/UVM-7 or Co-UVM-7 catalysts. The improved activity of the bimetallic AuCo-samples if compared to gold free cobalt catalysts can be explained on the basis of the enhanced reducibility of some cobalt species in the presence of gold, which facilitates the redox cycle. This high reducibility of cobalt species in the bimetallic samples is probably due to the formation of Co 3 O 4 domains at the g…

inorganic chemicalsMaterials scienceGeneral Chemical EngineeringInorganic chemistryNanoparticlechemistry.chemical_elementGeneral ChemistryTolueneIndustrial and Manufacturing EngineeringCatalysischemistry.chemical_compoundAdsorptionchemistryEnvironmental ChemistryTemperature-programmed reductionMesoporous materialBimetallic stripCobaltChemical Engineering Journal
researchProduct

Promoting the activity and selectivity of high surface area Ni–Ce–O mixed oxides by gold deposition for VOC catalytic combustion

2011

Gold supported on nickel cerium oxide catalysts (Ni–Ce–O) have been studied for the total oxidation of propane, as a model for hydrocarbon volatile organic compound emission control. High surface area Ni–Ce–O catalysts were synthesized using a very simple evaporation method, where cerium and nickel salts were evaporated in the presence of a mixture of methanol and oxalic acid. Gold catalysts were prepared following a deposition–precipitation method. A very efficient catalyst for the oxidation of propane, in terms of both activity and selectivity, was obtained. This high activity has been related to the high surface area of the catalyst (and therefore to the presence of more active sites ava…

inorganic chemicalschemistry.chemical_classificationCerium oxideorganic chemicalsGeneral Chemical EngineeringInorganic chemistryOxalic acidchemistry.chemical_elementCatalytic combustionGeneral ChemistryIndustrial and Manufacturing EngineeringCatalysisCeriumchemistry.chemical_compoundNickelHydrocarbonCatalytic oxidationchemistryEnvironmental Chemistryheterocyclic compoundsChemical Engineering Journal
researchProduct

Characterization of a Double Metal Cyanide (DMC)-Type Catalyst in the Polyoxypropylation Process: Effects of Catalyst Concentration

2014

The alkaline catalysts commonly applied to alkoxylation are characterized by a limited spectrum of activity caused by an irreversible termination of the polyether chains. The presented results show that double metal cyanide (DMC) catalysts reduce or eliminate the aforementioned adverse rearrangement of hydroxyl groups. Moreover, DMC catalysts indicate high activity at low concentrations (ppm range), as expressed by high polymerization rates. It was demonstrated that decreased concentrations of DMC catalyst irreversibly influence its reactivity and the dispersity of the obtained products, as exemplified by the production and determination of selected polyoxypropylenediols at different concen…

inorganic chemicalsorganic chemicalsGeneral Chemical EngineeringCyanideInorganic chemistryDispersityGeneral ChemistryDouble metalIndustrial and Manufacturing EngineeringCatalysisReaction ratechemistry.chemical_compoundchemistryPolymerizationScientific methodOrganic chemistryheterocyclic compoundsReactivity (chemistry)Industrial & Engineering Chemistry Research
researchProduct

Feedback Linearizing Control of Induction Motor Considering Magnetic Saturation Effects

2015

This paper presents an input-output feedback linearization (FL) control technique for rotating induction motors, which takes into consideration the magnetic saturation of the iron core. Starting from a new formulation of the dynamic model taking into consideration the magnetic saturation expressed in a space-state form in the rotor-flux-oriented reference frame, the corresponding FL technique has been developed. To this aim, a particular care has been given to the choice of nonlinear functions interpolating the magnetic parameters versus the rotor magnetizing current and the corresponding magnetic characteristic. The proposed FL technique has been tested experimentally on a suitably develop…

input-output feedback linearizationEngineering020209 energyInduction Motor input-output feedback linearization magnetic saturation effects.02 engineering and technologyIndustrial and Manufacturing Engineeringlaw.inventionSettore ING-INF/04 - AutomaticaControl theorylawmagnetic saturation effects0202 electrical engineering electronic engineering information engineeringTorqueFeedback linearizationInduction motor (IM)Electrical and Electronic Engineeringmagnetic saturation effects.MathematicsVector controlbusiness.industryRotor (electric)020208 electrical & electronic engineeringinput-output feedback linearization (FL)InductanceNonlinear systemMagnetic coreControl and Systems EngineeringbusinessInduction motorReference frame
researchProduct

How viable are spanish credit cooperatives after recent bank capitalization and restructuring regulations?

2011

Over the past three years, major reforms have been approved in Spain in order to restructure the banking sector. The purpose of these reforms has been to reinforce the solvency of credit institutions through recapitalization and integration into larger organizations. The credit cooperatives have not presented any solvency problems which would justify these measures being applied to them. The problem that the financial authorities see in their case is their limited size. As a result, the credit cooperatives are immersed in an integration process which is not revolving around the Banco Cooperativo Español (BCE) or the Spanish Association of Rural Savings Banks, as might be expected, but is ta…

jel:G28Cooperative credit legislation financial crisis restructuring process Spain.jel:K29jel:G01jel:G21CIRIEC-España, revista de economía pública, social y cooperativa
researchProduct

The Crises Management faced with new Challenges

2008

We witness an economic crisis without precedent that affects every area of our existence, rich and poor, at a global scale. The noise of financial crisis makes us no longer perceive other crises, which no one seems ready to accept them, namely a crisis of values that proliferate in our society. The experience of the past crises shows that the recession affecting mainly local companies, multinational companies managed to make profits during hard times for the economy of the host country, and the management is put in front of new challenges.

jel:M10jel:M21jel:M14jel:D7crisis management managers’ behavior economic restructuring performance management efficiency
researchProduct

Politik der Debatte

2023

julkinen keskustelupoliittinen päätöksentekoparlamentarismipoliittinen ajatteluparlamentitpoliittinen kulttuuripoliittisuusväittelyIndustrial and Manufacturing EngineeringSurfaces Coatings and FilmsIndes
researchProduct