Search results for "Turing"
showing 10 items of 2644 documents
Mechanical properties and corrosion behaviour of low carbon martensitic stainless steel after machining
2014
The influence of different combinations of cutting conditions on the mechanical behaviour (microhardness), the microstructure and the corrosion behaviour in NaCl solution (using the electrochemical microcell technique and pulse potentiodynamic testing) of a low carbon martensitic stainless steel (grade X4CrNiMo16.5.1 stainless steel) after tempering treatment was studied. Microhardness was increased on the machined surface. In addition, the electrochemical experiments have shown that the machined materials have a heterogeneous electrochemical behaviour. Significant effect of machining on pitting corrosion was noticed. The pitting potential was found to decrease as the microhardness increase…
CDRX modelling in friction stir welding of aluminium alloys
2005
In the paper a numerical model aimed to the determination of the average grain size due to continuous dynamic recrystallization phenomena (CDRX) in friction stir welding processes of AA6082 T6 aluminum alloys is presented. In particular, the utilized model takes into account the local effects of strain, strain rate and temperature; an inverse identification approach, based on a linear regression procedure, is utilized in order to develop the proper material characterization.
Fatigue crack growth in 2024-T351 Friction Stir Welded Joints: longitudinal residual stresses and microstructural effects
2009
Abstract The role of longitudinal residual stress on propagation of fatigue cracks was examined in friction stir welds produced in 2024-T351 aluminum alloy. Fatigue crack growth rate was obtained through constant Δ K Iapp tests for notches at different distances from the weld centerline. Subsequently, crack growth was correlated to weld residual stress measured by the cut-compliance method. It was found that residual stresses correspond to low crack growth rates outside the weld zone during fatigue loading. Once in the weld zone, the crack growth was affected by microstructural and hardness changes. Furthermore, weld residual stresses were mechanically relieved and effects on crack propagat…
Effect of hydrothermal ageing on the thermal and delamination fracture behaviour of CFRP composites
2014
Abstract This work investigates the hydrothermal ageing behaviour of a carbon fibre reinforced laminate and its epoxy matrix in bulk conditions. A model DGEBA epoxy is employed, and water uptake and dynamic mechanical thermal (DMTA) analyses have been performed on both the composites and bulk resin. Fracture toughness of the bulk resin has been measured, evidencing a substantially unmodified critical stress intensity factor KIC, although the evidence of plasticisation effects given by DMTA. Interlaminar Mode I fracture toughness of the composite showed a variable trend towards slight decreases or slight increases, according to the prevailing toughening or embrittling mechanisms activated by…
AA6082-T6 Friction Stir Welded Joints Fatigue Resistance: Influence of Process Parameters
2006
In the paper the results of a wide range of experiments on friction stir welding (FSW) of aluminium alloys are reported. In particular, the AA6082-T6 butt joints fatigue resistance was investigated by varying the most relevant process parameters. In addition, a revolutionary pitch was utilized in order to investigate the effects of the tool rotating speed and the tool feed rate. Observations of the fracture insurgence were developed for different levels of applied load.
Mode I failure modeling of friction stir welding joints
2008
This paper analyzes mechanical response by finite element method up to the decohesion failure in fracture mode I for joints of friction stir welding (FSW) of an aluminum alloy. It first describes experimental investigations on specimens with FSW embedded, subjected to uniform traction and local punch tests used to characterize local elastic and plastic material parameters. The heterogeneity of the mechanical properties induced by the FSW process is taken into account for the elastic-plastic finite element simulation. The growing damage and the opening failure of the welding zone are described by the adoption of a cohesive interface model with specific mechanical properties.
Analysis of Material Formability in Incremental Forming
2002
Abstract Incremental forming is an innovative sheet metal forming technology in which a blank is plastically deformed through the progressive action of a small-size punch, whose movement is governed by a CNC machine. In this way the tool locally deforms the material through an almost pure stretching deformation mechanics. The paper is focused on material formability in incremental forming. Several tests were developed, aimed to the achievement of different straining conditions in the material and consequently to the determination of Forming Limit Diagrams for progressive forming operations. The features and the application of such FLD are discussed in the paper.
Optimisation of TA6V alloy surface laser texturing using an experimental design approach
2008
International audience; Active surfaces of plastic injection moulds are nowadays textured using classical techniques (chemical etching or EDM). Replacement of these technologies by a laser technology introduces a big flexibility: absence of mechanical contact with the tool, decrease of the effluent's volume and a big machining precision, even in the case of the complex forms as injection moulds for example. This paper reports the experimental study of the surface laser texturing of TA6V alloy. The influence of the operating factors on the laser texturing process has been studied using two experimental approaches: Taguchi methodology and response surface methodology (RSM). Empirical models h…
Comparative assessment of surface roughness produced by hard machining with mixed ceramic tools including 2D and 3D analysis
2005
Abstract This paper provides a new comprehensive analysis of part surface finish in continuous dry turning of a hardened construction steel when using mixed alumina cutting tools. Consequently, the surface profiles (2D arragement) and surface microstereometries (3D arragement) generated during different hard part turning operations on a 40H low chromium alloy steel (equivalent to AISI 5140 or DIN 41Cr4), heat treated to the hardness of about 60 HRC, were evaluated. As a result, this paper aggregates the multi-parameters characterization of the surface roughness with the machined surface structure obtained at the three selected feed rates and constant cutting speed of 100 m/min. Results show…
Computer simulation of metal flow in the hot upsetting of a high-strength aluminium alloy
1993
Abstract The effects of metal-working temperature on the hot axisymmetric upsetting of AA 7012 aluminium alloy were investigated in the temperature range of from 250 to 400°C, at a strain rate of 4 s −1 . The material behaviour was studied by means of simulative methods based on the analysis of torsion-test results which have shown that when the strain increases, the flow stress increases to a peak value and then decreases to a fracture value. Furthermore, the flow stress decreases with decreasing strain rate and with increasing temperature. Constitutive equations, describing accurately the hot deformation behaviour of the material, were defined and used subsequently in a numerical model th…