Search results for "Turing"

Peltier cells as temperature control elements: Experimental characterization and modeling

2014

Abstract The use of Peltier cells to realize compact and precise temperature controlled devices is under continuous extension in recent years. In order to support the design of temperature control systems, a simplified modeling of heat transfer dynamics for thermoelectric devices is presented. By following a macroscopic approach, the heat flux removed at the cold side of Peltier cell can be expressed as Q ˙ c = γ ( T c − T c eq ) , where γ is a coefficient dependent on the electric current, Tc and T c eq are the actual and steady state cold side temperature, respectively. On the other hand, a microscopic modeling approach was pursued via finite element analysis software packages. To validat…

Residual stresses and FCP prediction in FSW through a continuous FE model

2009

Abstract Residual stresses prediction is definitively a relevant and open issue in welding processes. In the last years, different numerical models are proposed by many researchers to predict the residual stress field in FSW butt joint. However, most of these works are based on properly tuned analytical models and neglect the effect of the mechanical action due to the presence of the tool pin. In the present paper, a continuous 3D FE model, which was previously developed by some of the authors, was used to simulate the FSW process of butt joints with a single block approach, and predict the residual stress field by considering both thermal and mechanical actions. Then, the residual stress e…

Energy models for fatigue life estimation under uniaxial random loading. Part I: The model elaboration

2001

The paper contains analysis of the energy models for the fatigue life assessment under uniaxial stress state. From the simulation tests it appears that taking into account the stress and strain signs during determination of the energy density allows one to distinguish the strain energy density at the tension and compression path. Under random loading with the zero expected values for Gaussion processes it leads to the centered stochastic process. A new (basic for damage cumulation) material characteristic can be easily determined by rescaling the widely used standard stress and strain characteristics of cyclic fatigue. A new model of the fatigue life determination has been proposed. This mo…

Effectiveness of stirrups and steel fibres as shear reinforcement

2004

This paper presents the results of experimental tests carried out on rectangular simply supported beams made of hooked steel fibre reinforced concrete with and without stirrups, subjected to two-point symmetrically placed vertical loads. The tests, carried out with controlled displacements, allow one to record complete load-deflection curves by means of which it is possible to deduce information on dissipative capacity and ductile behaviour up to failure. Depending on the amount of transverse reinforcement, volume fraction of fibres added in the mix and shear span, the collapse mechanism is due to predominant shear or flexure, thus showing the influence of the aforementioned structural para…

Random short sisal fiber biocomposites: Optimal manufacturing process and reliable theoretical models

2018

Although several works have been published in literature on agave fibers and their biocomposites, accurate information about the choice of both the fibers and the manufacturing processes that allow the user to optimize the biocomposites properties in terms of strength and stiffness are not yet available; also, no theoretical models that can be used for an accurate evaluation of the mechanical properties of these biocomposites, are reported.To this aim, the present work intends to give a contribution by considering green epoxy biocomposites reinforced by both short and discontinuous sisal agave fibers arranged in proper MAT-type fabrics. In particular, an optimized manufacturing process that…

Toward high performance renewable agave reinforced biocomposites: Optimization of fiber performance and fiber-matrix adhesion analysis

2017

Abstract The increasing sensitivity toward the environmental pollution and the recent laws on the environmental protection, have led to an increasing attention to the so called biocomposites, i.e. to ecofriendly or renewable composite materials, obtained from biopolymers reinforced by natural fibers. Although the contribution of various works reported in literature, focused on biocomposites reinforced by agave fibers, such materials are still exclusively used in the automotive industry for non-structural applications, and the implementation of high performance biocomposites for semi-structural and structural applications, is an expected, but not yet reached objective. Therefore, the present…

Salt-fog spray aging of jute-basalt reinforced hybrid structures. Flexural and low velocity impact response

2017

Abstract In this work, a study on the aging resistance of jute and jute-basalt interply hybrid laminates exposed to salt-fog is presented with the aim to investigate the possibility to enhance the durability of natural fiber reinforced composites for marine application by a ply-substitution approach. In particular, jute and basalt/jute reinforced composite plates were manufactured by vacuum assisted resin infusion in two different staking sequences (i.e., intercalated and sandwich-like basalt-jute) and aged under salt fog conditions. The effects of the accelerated aging at increasing times on the mechanical response of laminates were assessed in both quasi static (three point bending) and d…

Monitoring Reversible Tight Junction Modulation with a Current-Driven Organic Electrochemical Transistor

2021

Temperature control during Spark Plasma Sintering and application to up-scaling and complex shaping

2013

International audience; The determination and the homogeneity of the sample temperature during consolidation of powders by Spark Plasma Sintering (SPS) are addressed. Densifications were carried out in three different facilities differing by their constructors and their size. A structural transformation activated in a TiAl alloy was used as a marker of the sample temperature and finite element modeling were performed to evaluate the temperature at each point of the set-up. A good agreement between experimental and simulated data is exhibited. Alloys with identical microstructures were sintered and the homogeneity of the microstructure was better in the largest machines or when the sample wa…

Random Copolymers:  Their Solution Thermodynamics as Compared with That of the Corresponding Homopolymers

2008

Vapor pressure data (at 50 °C) of solutions of poly(methyl methacrylate) [PMMA], polystyrene [PS], and poly(styrene-ran-methyl methacrylate) [P(S-ran-MMA)], with different weight fractions f of styrene units, in either CHCl3, acetone [AC], methyl acetate [MeAc], or toluene [TL] were evaluated with respect to the dependence of the Flory−Huggins interaction parameter χ on polymer concentration and on f. For all solutions under investigation, χ varies considerably with the composition of the mixture, and only for four of them [CHCl3/PS, AC/PMMA, MeAc/PS, and TL/P(S-ran-MMA) f = 0.5] is this dependence linear; another four systems exhibit a minimum [CHCl3/PMMA, CHCl3/P(S-ran-MMA) f = 0.5, TL/PM…