Search results for "Turing"
showing 10 items of 2644 documents
On the Reduction of Power Consumption in Vortexing Unbaffled Bioslurry Reactors
2020
Bioremediation of polluted soils via bioslurry reactors is an interesting option among those available nowadays, especially when recalcitrant pollutants are present. Vortexing unbaffled stirred tanks may be a valuable choice to this purpose as they were recently found to be more efficient than baffled vessels for solid suspension processes where mixing time is not a controlling factor. When operated at sufficiently high agitation speeds, the central vortex bottom reaches the impeller and air bubbles start to be distributed throughout the system, thus avoiding any sparger and related clogging issues. In the present work, a vortexing unbaffled stirred tank with solid loadings ranging from 2.5…
Novel poly (ionic liquid)-based anion exchange membranes for efficient and rapid acid recovery from industrial waste
2020
Abstract Owing to the less energy consumption, positive impact on the environment, and prospect of providing clean water resources, anion exchange membranes (AEMs) are promising materials for acid recovery from various industrial wastewater/effluent. Based on the diffusion dialysis process, AEMs selectively allow rapid proton permeation while efficiently retaining metal ions. To enhance the efficiency of the acid recovery process, precise control of macromolecular architecture and chemical composition that enables high hydrophilicity, proton conductivity through the membrane, and ion exchange capacity is required. In this direction, we report on the one-step fabrication of novel poly (ionic…
Preparation of Poly(l-lactic acid) Scaffolds by Thermally Induced Phase Separation: Role of Thermal History
2018
Abstract Poly-L-Lactic Acid (PLLA) scaffolds for tissue engineering were prepared via thermally induced phase separation of a ternary system PLLA/dioxane/tetrahydrofurane. An extension to solution of a previously developed method for solidification from the melt was adopted, the technique being based on a Continuous Cooling Transformation (CCT) approach, consisting in recording the thermal history of rapidly cooled samples and analysing the resulting morphology. Different foams were produced by changing the thermal history, the dioxane to THF ratio (50/50, 70/30, 90/10 v/v) and the polymer concentration (2, 2.5, 4 ° wt) in the starting ternary solution. Pore size, porosity, melting and crys…
Multi-functional hindered amine light stabilizers-functionalized carbon nanotubes for advanced ultra-high molecular weight Polyethylene-based nanocom…
2015
Hindered Amine Light Stabilizer (HAS) molecules have been covalently linked on the outer surface of multi-walled carbon nanotubes (CNTs), and the so-obtained multi-functional fillers (HAS-f-CNTs) have been compounded with Ultra High Molecular Weight Polyethylene (UHMWPE) to get composite films. The success of the grafting reaction of the HAS molecules has been confirmed through spectroscopic and thermo-gravimetric analyses. Morphological analyses reveal a segregated microstructure, in which CNT-rich channels surround the polymer domains. This morphology results in improved mechanical properties and appreciable electrical conductive features. More importantly, the addition of only 1 wt.% of …
Effect of external basalt layers on durability behaviour of flax reinforced composites
2016
Abstract Aim of this work is to evaluate the influence of external layers of basalt-mat on the durability behaviour of flax reinforced epoxy composites. To this scope, long-term ageing tests were performed on two different laminates in critical environmental conditions. The first laminate, named Flax, was constituted by stacking ten layers of bidirectional flax fabrics. The second one, named Flax–Basalt, was produced by replacing two external flax layers with two layers of basalt mat for each side of the laminate. Both laminates were exposed to salt-fog environmental conditions, according to ASTM B 117 standard, for 60 days. Five samples per laminate were removed from salt-fog spray chamber…
A simple method to interpret the rheological behaviour of intercalated polymer nanocomposites
2016
Abstract Nanocomposites are a new class of polymer composites that exhibit an interesting combination of chemical, physical, thermal and mechanical properties. Only small amounts of nanofiller are sufficient to generate great variations of many properties. This work focuses on the rheological behaviour of the intercalated polymer nanocomposites in shear flow. The increase of the viscosity and the more pronounced non-Newtonian behaviour is interpreted simply considering the increase of volume of the inert phase caused by the intercalation of the macromolecules. Indeed, the volume of the intercalated tactoids increases with increasing the interlayer distance. On the other hand, the interlayer…
Properties evolution of flax/epoxy composites under fatigue loading
2014
International audience; The tension-tension fatigue behaviour of flax fibre reinforced epoxy matrix composites have been investigated for specimens having [0]12, [90]12, [0/90]3S and [±45]3S lay-ups. The Probabilized Stress-Number of cycles (P-S-N) curves have been determined for each laminate type. The measured stress and strain data allowed to quantify the evolution of the mechanical properties, i.e. stiffness, damping and permanent strain as a function of imposed cycles. Especially, the stiffening phenomenon of flax reinforcements oriented parallel to the loading direction has been confirmed. However, due to the competition between damage development and the fibre stiffening, the increas…
An experimental investigation on performances recovery of glass fiber reinforced composites exposed to a salt-fog/dry cycle
2023
The main goal of this paper is the evaluation of the properties reversibility of glass fiber reinforced polymers (GFRPs) under discontinuous exposure to aggressive environmental conditions, typical of marine applications. To this aim, the GFRP manufactured through vacuum infusion process has been initially aged in humid conditions (i.e., exposure to salt-fog at 35 ◦C) for 15 and 30 days and then stored under controlled dry conditions (i.e., 50% R.H. and 23 ◦C) for times varying between 0 and 21 days. In order to evaluate the recover capability of this material, its water uptake has been monitored along the quasi-static flexural properties during the entire humid/dry cycle. Moreover, both 3D…
TOWARD A DESIGN METHOD FOR METAL-COMPOSITE CO-CURED JOINT BASED ON THE G-SIFs
2013
Abstract In this work, a systematic study of the singular stress field in the zone where the interface intersects the free edge surfaces of bonded metal-composite co-cured joints, has been performed. The obtained theoretical, numerical and experimental results have permitted to detect the relationships between the joint configuration and the singular stress field, as well as to implement a new design method based on the so called generalised stress intensity factors. Such a proposed method allows the user to predict the static strength of a generic metal-composite co-cured joint, vs. the main influence parameters as the elastic modulus of the coupled materials, the overlap length, the taper…
Effect of the upper material of running shoes on muscle mechanical power transfer on lower limbs
2022
This study focuses on determining the effects of the upper material of running shoes on the mechanical power flows of the muscles of the lower limbs during the support phase of running. Two models of running shoes—differentiated only by the upper structure and material—have been used, being randomly assigned to 19 participants. Five measurements of each participant per shoe model were obtained at 3.3 m·s−1 to perform inverse dynamic analysis with the data obtained. Statistically significant differences have been found between the two models for the muscle power flow variables in the ankle, knee and hip joints, as well as at the ends of adjacent segments. The KNIT-upper model (model 2) pres…