Search results for "Ultrasonic"
showing 10 items of 565 documents
Nonlinear analysis of cylindrical and conical hysteretic whirl motions in rotor-dynamics
2014
Abstract The internal friction of a rotor–shaft-support system is mainly due to the shaft structural hysteresis and to some possible shrink-fit release of the assembly. The experimentation points out the destabilizing effect of the internal friction in the over-critical rotor running. Nevertheless, this detrimental influence may be efficiently counterbalanced by other external dissipative sources located in the supports or by a proper anisotropic configuration of the support stiffness. The present analysis considers a rotor–shaft system which is symmetric with respect to the mid-span and is constrained by viscous-flexible supports with different stiffness on two orthogonal planes. The cylin…
Viscoelastic bearings with fractional constitutive law for fractional tuned mass dampers
2015
Abstract The paper aims at studying the effects of the inherent fractional constitutive law of viscoelastic bearings used as devices for tuned mass dampers. First, the proper constitutive law of the viscoelastic supports is determined by the local constitutive law. Then, the characteristic force–displacement relationship at the top of the bearing is found. Taking advantage of the whole bearing constitutive laws, the tuning of the mass damper is proposed by defining the damped fractional frequency, which is analogous to the classical damped frequency. The effectiveness of the optimal tuning procedure is validated by a numerical application on a system subjected to a Gaussian white noise.
Thermodynamics, transport phenomena, and electrochemistry of external field-assisted nonthermal food technologies
2017
Interest in the development and adoption of nonthermal technologies is burgeoning within the food and bioprocess industry, the associated research community, and among the consumers. This is evident from not only the success of some innovative nonthermal technologies at industrial scale, but also from the increasing number of publications dealing with these topics, a growing demand for foods processed by nonthermal technologies and use of natural ingredients. A notable feature of the nonthermal technologies such as cold plasma, electrohydrodynamic processing, pulsed electric fields, and ultrasound is the involvement of external fields, either electric or sound. Therefore, it merits to study…
Robotic path planning for non-destructive testing of complex shaped surfaces
2015
The requirement to increase inspection speeds for non-destructive testing (NDT) of composite aerospace parts is common to many manufacturers. The prevalence of complex curved surfaces in the industry provides significant motivation for the use of 6 axis robots for deployment of NDT probes in these inspections. A new system for robot deployed ultrasonic inspection of composite aerospace components is presented. The key novelty of the approach is through the accommodation of flexible robotic trajectory planning, coordinated with the NDT data acquisition. Using a flexible approach in MATLAB, the authors have developed a high level custom toolbox that utilizes external control of an industrial …
Central Bursting Defects in Drawing and Extrusion: Numerical and Ultrasonic Evaluation
1993
Abstract A new approach for the prediction of central bursting defects in extrusion and drawing is proposed: a finite element analysis of the processes has been carried out, and the obtained results have been elaborated by means of a post-processor, which, employing a proper ductile fracture criterion, is able to suggest if and where the central burst occur. An ultrasonic control system able to detect the insurgence of defects with a resolution of 0.2 mm. has been setup in order to verify the predictive capability of the model. The experimental results show a good agreement with the numerical predictions confirming the effectiveness of the proposed approach, whose industrial application app…
Compressive sensing for direct time of flight estimation in ultrasound-based NDT
2017
This paper presents an approach for estimation of ultrasonic time-of-flight (TOF) within a Non Destructive Testing (NDT) and Structural Health Monitoring (SHM) context. The presented method leverages recent advances in the field of Compressive Sensing (CS), which makes use of sparsity in a transform domain of a signal in order to reduce the number of samples required to store it. CS achieves this through a two key ideas: random matrix projections, and l1-penalised linear regression. In this case, sparsity arises from the observation that in a pulse-echo ultrasound test, the number of echoes is relatively small compared to the number of measurement points in a waveform. This sparsity is evid…
3D simulations and experiments of guided wave propagation in adhesively bonded multi-layered structures
2010
Understanding guided wave propagation in multi-layered plates and interaction with discontinuities can be difficult, as well as the interpretation of the ultrasonic signals. Propagation of guided waves can be studied analytically solving the equations of motion with the proper boundary conditions; nevertheless analytical models can be difficult to solve for complex multi-layered structures or having inner discontinuities. The problem can be efficiently studied using numerical techniques. Simulation of guided wave propagation in multi-layered structures, for ultrasonic waves in the MHz range, is solved here with the finite element analysis based on an explicit integration rule to solve the e…
Noncontact Air-Coupled Guided Wave Ultrasonics for Detection of Thinning Defects in Aluminum Plates
2001
Ultrasonic guided waves are gaining increasing attention for the inspection of platelike and rodlike structures. At the same time, inspection methods that do not require contact with the test piece are being developed for advanced applications. This paper capitalizes on recent advances in the areas of guided wave ultrasonics and noncontact ultrasonics to demonstrate a superior method for the nondestructive detection of thinning defects simulating hidden corrosion in thin aluminum plates. The proposed approach uses micromachined gas (air)-coupled capacitive transducers for the noncontact generation and detection of guided plate waves. Interesting features in the dispersive behavior of select…
Low-cost underwater navigation systems by multi-pressure measurements and AHRS data
2017
This paper deals with accurate navigation for underwater remotely operated vehicles. A feasibility study for a multi-pressure device to be mounted on an ROV is presented. The device can provide accurate estimates of a ROV orientation and angular speed. It is based on the well-known total pressure principle, also used in a Pitot tube, and allows reconstruction of static and dynamic pressures, which in turn provide good estimates of the ROV's orientation and rotational speed, respectively. An appealing feature of the proposed device is its ability to provide accurate estimates even for low-speed movements.
Three dimensional reconstruction of intracoronary ultrasound images: roadmapping with simultaneously digitised coronary angiograms
2002
Three dimensional reconstruction of intracoronary ultrasound images offers a better appreciation of the axial relationship of vessel features and permits volumetric assessment, both of which depend critically on the spatial accuracy of the technique. This in turn is dependent on precise longitudinal orientation of the transducer in the vessel. The authors have developed a system which utilises simultaneously digitised fluoroscopic tracking of the radio-opaque transducer to orient the corresponding 2D ICUS images. This system may offer improved spatial accuracy of the three dimensional reconstruction and a means of precise identification of the 2D ICUS image which corresponds with a selected…