Search results for "Velocity profile"
showing 10 items of 32 documents
Flow resistance of overland flow on a smooth bed under simulated rainfall
2020
In this paper a recently theoretically deduced flow resistance equation, based on a power-velocity profile, was tested using laboratory measurements by Yoon and Wenzel for an overland flow on a smooth bed under rainfall. These measurements of the Darcy-Weisbach friction factor, corresponding to a wide range of the flow Reynolds number (191–5700), were carried out for an overland flow under a simulated rainfall characterized by different intensity values ranging from 13 to 381 mm h−1. At first, the available measured values of flow velocity, water depth, cross sectional area, wetted perimeter and bed slope were used to calibrate the relationship between the velocity profile parameter Γ, the …
Rheological and Flocculation Analysis of Microfibrillated Cellulose Suspension Using Optical Coherence Tomography
2018
A sub-micron resolution optical coherence tomography device was used together with a pipe rheometer to analyze the rheology and flocculation dynamics of a 0.5% microfibrillated cellulose (MFC) suspension. The bulk behavior of the MFC suspension showed typical shear thinning (power-law) behavior. This was reflected in a monotonously decreasing floc size when the shear stress exceeded the yield stress of the suspension. The quantitative viscous behavior of the MFC suspension changed abruptly at the wall shear stress of 10 Pa, which was reflected in a simultaneous abrupt drop of the floc size. The flocs were strongly elongated with low shear stresses. With the highest shear stresses, the flocs…
Flow resistance due to shrubs and woody vegetation
2023
In this paper, a theoretical open channel flow resistance equation was verified using flow depth and discharge measurements carried out by Freeman et al. in a large channel, 2.44 m wide, for ten different types of uniform-sized plants (shrubs and woody vegetation). The plants, which are broadleaf deciduous vegetation commonly found in floodplains and riparian zones, were placed in staggered rows inside the channel whose bed was constructed to accept plants with their root systems. For each species, the available measurements were carried out by Freeman et al. with plants having different values of plant density, height, and bending stiffness. The available literature database (87 measuremen…
Assessing theoretical flow velocity profile and resistance in gravel bed rivers by field measurements
2018
Previous studies showed that integrating a power velocity profile, deduced applying dimensional analysis and the incomplete self-similarity condition, the flow resistance equation for open channel flow can be obtained. At first, in this paper the relationship between the Gamma function of the power velocity profile, the channel slope and the Froude number, which was already empirically introduced in a previous paper, is now theoretically deduced. Then this relationship is calibrated using the field measurements of flow velocity, water depth and bed slope carried out in 101 reaches of gravel bed rivers available by literature. The proposed relationship for estimating Gamma function and the t…
Testing flow resistance equation for rill flow
2018
At first, in this paper a flow resistance equation for rill flow, deduced applying dimensional analysis and self-similarity theory, is presented. The incomplete self-similarity hypothesis is used for establishing the flow velocity distribution whose integration gives the theoretical expression of the Darcy-Weisbach friction factor. Then the deduced theoretical resistance equation, which is calibrated by some measurements of flow velocity, water depth, cross section area, wetted perimeter and bed slope carried out in 106 reaches of some rills modelled on an experimental plot, is tested using the literature data by Abrahams et al. (1996), Strohmeier et al. (2014) and Peng et al. (2015) for ri…
Effects of Boulder Arrangement on Flow Resistance Due to Macro-Scale Bed Roughness
2023
Flow resistance in gravel-bed channels is not only affected by the shape and size of the roughness elements, but also by their arrangement on the channel bed surface (position to flow streamlines, spacing between elements, and their protrusion from the channel bed). Many investigations proved that open channel flow resistance can be obtained by integrating the power velocity profile. For a macro-scale roughness condition, this study aims to investigate the effect of different boulder arrangements on flow resistance. First, for each arrangement, the equation relating Γ function of the power velocity profile, the Froude number, and the channel slope was calibrated using available measur…
Comment on “Effects of different tillage practices on the hydraulic resistance of concentrated flow on the loess plateau in China” by J. Sun et al
2020
Abstract For concentrated flows, which are characterized by small water depth and steep sloping beds, hydraulic conditions different from those typical of streams and rivers occur. In this study a new theoretically deduced flow resistance equation was tested using the experimental data by Sun et al. for three different tilled surfaces (Manual Dibbling, MD, Manual Hoeing, MH, and Contour Drilling, CD). At first, the profile parameter-relationship, which is the relationship between the velocity profile parameter Γ, the channel slope and the flow Froude number, was calibrated using rill flow data by Di Stefano et al. Then, the applicability of this relationship was tested by the measurements o…
Discussion on 'Estimating depth-averaged velocities in rough channels'
2002
In this short communication the four estimate criteria of the depth-averaged local velocity proposed by Byrd et al. (Earth Surface Processes and Landforms, 2000, Vol. 25, pp. 167-173) are compared both with the three-point method of Bathurst and with the average velocity obtained by integrating the velocity profile (FPa2) suggested by Ferro and Pecoraro (Water Resources Research, 2000, vol. 36, pp. 2761-2770). The comparison was carried out using 84 velocity profiles measured by an acoustic Doppler velocimeter in a rectangular flume with a gravel bed. Copyright © 2002 John Wiley and Sons, Ltd.
Experiments for testing soil texture effects on flow resistance in mobile bed rills
2018
Abstract In this paper a recently theoretically deduced rill flow resistance equation, based on a power-velocity profile, was tested experimentally on plots of varying slopes and soil texture in which mobile bed rills are incised. Measurements of flow velocity, water depth, cross section area, wetted perimeter and bed slope conducted in rill reaches incised on experimental plots, having different slope values (9, 14, 22, 24 and 26%) and soil texture (clay fraction ranging from 42 to 73%), and literature data were used to calibrate the flow resistance equation. In particular, the relationship between the velocity profile parameter Γ, the channel slope, the flow Froude number and texture frac…
A full‐scale study of Darcy‐Weisbach friction factor for channels vegetated by riparian species
2021
In this article, an open channel flow resistance equation, deduced applying dimensional analysis and incomplete self-similarity condition for the flow velocity distribution, was tested using measurements carried out in a full-scale channel equipped with three types of riparian plants (Salix alba L., Salix caprea L. and Alnus glutinosa L.). In the experimental channel, having banks lined with boulders, the vegetation branches were anchored in a concrete bottom. For each species, the measurements were carried out with plants having different amounts of leaves, different plant density and plant area index. The relationship between the scale factor Γ of the velocity profile and the Froude numbe…