Search results for "Vent"
showing 10 items of 24974 documents
On the complete interface development of Al/Cu magnetic pulse welding via experimental characterizations and multiphysics numerical simulations
2021
Abstract A complex Al/Cu magnetic pulse welding interface is systematically investigated using experimental characterizations and numerical simulations. A Coupled electromagnetic-mechanical simulation is proposed to compute the impact velocity and impact angle along the entire interface. This model allows to further understand the formation mechanism of various interface characteristics during MPW. The results revealed that the impact velocity gradually decreases in conjunction with the gradual increase of the impact angle. These simulations elucidate the experimentally observed successive interface morphologies, i.e., the unwelded zone, vortex zone, intermediate (IM) layers and wavy interf…
Design of a telescopic tower for wind energy production with reduced environmental impact
2019
A prototype of a telescopic pole for wind energy production with low environmental impact and its lifting system for a 60 to 250 kW turbine and a height of 30 m have been designed and manufactured. A telescopic tower, which is raised and lowered by automation or by remote control, allows to differentiate the presence of the generator within the landscape over time. The technology currently available for lifting and lowering wind turbines is made up of telescopic poles of heights of less than 10 meters and with tilting posts of height below 30 m. Without a state of the art to refer to, the telescopic pole and its lifting system have been designed starting from scratch and solving with innova…
Global sensitivity analysis in welding simulations -- what are the material data you really need ?
2011
In this paper, the sensitivity analysis methodology is applied to numerical welding simulation in order to rank the importance of input variables on the outputs of the code like distorsions or residual stresses. The numerical welding simulation uses the finite element method, with a thermal computation followed by a mechanical one. Classically, a local sensitivity analysis is performed, hence the validity of the results is limited to the neighbourhood of a nominal point, and cross effects cannot be detected. This study implements a global sensitivity analysis which allows to screen the whole material space of the steel family mechanical properties. A set of inputs of the mechanical model-ma…
Identification of Objects Based on Generalized Amplitude-Phase Images Statistical Models
2017
The article presents the dynamical objects identification technology based on statistical models of amplitude-phase images (APIm) – multidimensional data arrays (semantic models) and statistical correlation analysis methods using the generalized discrete Hilbert transforms (DHT) – 2D Hilbert (Foucault) isotropic (HTI), anisotropic (HTA) and total transforms – AP-analysis (APA) to calculate the APIm. The identified objects are modeled with 3D airplanes templates rotated in space around the center of Cartesian coordinate system. The DHT domain system of coordinates displaying the plane projections (2D flat images) remains to be space-invariant. That causes the anisotropic properties of APIm a…
An insight into the electrical energy demand of friction stir welding processes: the role of process parameters, material and machine tool architectu…
2018
The manufacturing sector accounts for a high share of global electrical energy consumption and CO 2 emissions, and therefore, the environmental impact of production processes is being more and more investigated. An analysis of power and energy consumption in friction stir welding processes can contribute to the characterization of the process from a new point of view and also provide useful information about the environmental impact of the process. An in-depth analysis of electrical energy demand of friction stir welding is here proposed. Different machine tool architectures, including an industrial dedicated machine, have been used to weld aluminum and steel sheets under different process …
Manufacturing Risk Identification in the Steel Industry
2020
The steel manufacturing industry is an inseparable part of the nuclear power plant construction project. This industry is a business full of dynamics, risks, and challenges. The implementation of risk management becomes an obligation that must be executed in managing this very complex project. In general, risk management in manufacturing includes steps to understand and identify potential problems that may occur, evaluate, monitor, and handle risks. The main risk management objectives are to prevent or minimize adverse effects due to unforeseen events through risk aversion or preparation of contingency plans related to those risks. This paper describes the identification of risk factors and…
A model for torque losses in variable displacement axial piston motors
2018
This paper includes a comparison of earlier presented models for torque losses in hydraulic motors and several proposed models that all rely on data typically available for a system engineer. The new models and the old ones are compared. The new models are all based on a model developed by Jeong 2007 with an expansion that include variable displacement. All of the new models yield very good accuracy down to approximately 50% of maximum displacement and down to approximately 15% of maximum speed. In these operational ranges the deviation in torque is less than 1%. The main purpose of the new models is to facilitate simulations of hydraulically actuated winches with a balance between accuracy…
Performance and feasibility of biotrickling filtration in the control of styrene industrial air emissions
2017
Abstract The performance and feasibility of a pilot unit of biotrickling filter (BTF) for the treatment of industrial emissions polluted by styrene was investigated for one year at a fiber reinforced plastic industrial site. The pilot unit was packed with a structured material with a volume of 0.6 m3. Monitoring results have shown successful treatment of the industrial styrene emissions working at empty bed residence times (EBRT) between 31 and 66 s. The best performance was obtained after 300 days when a more stable biofilm had been developed, obtaining the highest elimination capacity of 18.8 g m−3 h−1 (removal efficiency of 75.6%) working at 31 s of EBRT. In addition, a photocatalytic re…
Transformation of Construction Cement to a Self-Healing Hybrid Binder
2019
A new biomimetic strategy to im prove the self-healing properties of Portland cement is presented that is based on the application of the biogenic inorganic polymer polyphosphate (polyP), which is used as a cement admixture. The data show that synthetic linear polyp, with an average chain length of 40, as well as natural long-chain polyP isolated from soil bacteria, has the ability to support self-healing of this construction material. Furthermore, polyP, used as a water-soluble Na-salt, is subject to Na+/Ca2+ exchange by the Ca2+ from the cement, resulting in the formation of a water-rich coacervate when added to the cement surface, especially to the surface of bacteria-containing cement/c…
Challenges influencing the safety of migrant workers in the construction industry: A qualitative study in Italy, Spain, and the UK
2021
Abstract The construction industry is notoriously high risk for accidents, injuries, and deaths, particularly for non-national or migrant workers, who comprise a significant proportion of the workforce. This paper presents an international, qualitative study focused on exploring the challenges which influence the safety of migrant construction workers in Italy, Spain, and the UK. Based on a comprehensive review of the literature, we formulated two research questions about the challenges relating to safety that migrant workers face and the challenges to safety training effectively improving migrant workers’ safety behaviours. We present our template analysis of semi-structured interviews and…