Search results for "Viscoelasticity"
showing 10 items of 224 documents
Melange: A viscoelastic lattice-particle model applicable to the lithosphere
2012
[1] This article introduces the software Melange, a 3D lattice-particle hybrid model. The software was specifically designed in order to simulate ductile visco-elasto-plastic deformation and can be used to study tectonic processes in the lithosphere from the micro to the macro scale. Melange is under an open source license. The code takes both relevant yield mechanisms for the deformation of lithospheric material into account: dynamic brittle failure and ductile creep, where ductile creep is modeled as viscoelasticity. The software considers effects of the local geology, of the inherent disorder of geomaterials, of rheological layering of the lithosphere and applies repulsion when the mater…
Cellulose ether emulsions as fat source in cocoa creams: Thermorheological properties (flow and viscoelasticity)
2019
Flow behaviour and viscoelastic properties at three different temperatures (20, 45 and 70 °C) of cocoa filling creams have been studied. These creams were composed of cocoa, starch, sugar, skimmed milk powder and non-digestible cellulose ether emulsions as fat source. Two types of methylcelluloses, MC, and two types of hydroxypropyl methylcelluloses, HPMC, with different chemical substitution degrees were employed. Results showed important differences in zero shear viscosity and shear thinning character at room temperature, due to the different internal structure revealed by the viscoelastic moduli spectra. Temperature sweeps of storage modulus showed different temperature gelation dependin…
Fractional-Order System Identification of Viscoelastic Behavior: A Frequency Domain Based Experimental Study
2020
In this work, the fractional-order modeling of viscoelastic behavior is investigated based on measurement data in the frequency domain. For the results of two different test setups we apply existing parameter estimation algorithms designed for fractional-order transfer functions. These algorithms require a priori knowledge of the system structure including the commensurate order of differentiation. An iterative procedure is used to evaluate the influence of the unknown structure. The measured polymer samples show a viscoelastic stress response. We can show that integer-order models are not capable of capturing this behavior. For a set of predefined structures, the best obtained fractional-o…
Fractional hereditariness of lipid membranes: Instabilities and linearized evolution
2016
In this work lipid ordering phase changes arising in planar membrane bilayers is investigated both accounting for elas- ticity alone and for effective viscoelastic response of such assemblies. The mechanical response of such membranes is studied by minimizing the Gibbs free energy which penalizes perturbations of the changes of areal stretch and their gradients only [1]. As material instabilities arise whenever areal stretches characterizing homogeneous configurations lie inside the spinoidal zone of the free energy density, bifurcations from such configurations are shown to occur as oscillatory perturbations of the in-plane displacement. Experimental observations [2] show a power-law in-pl…
Stress-strain analysis of specimens subjected to tensile loading during moisture uptake
2015
Abstract: A robust and efficient numerical method for the calculation of the internal stress state that develops within structures subjected to mechanical and steady state or transient hygroscopic loading conditions, has been developed. The method encompasses a layer by layer approach whereby the structure is discretised into plies with different material properties corresponding to the different ply moisture content. The proposed method has been validated against finite element solutions, and results from its application on a fully characterised EDT (technical name) polymer binder are presented. The impact of the moisture induced viscoelastic behaviour on the structural response of the cas…
Technical Note: Prediction Models of Airborne Sound Insulation of Multilayer Materials with Viscoelastic Thin Sheets
2008
The growing introduction of new insulation materials in building acoustics has caused an increase of the importance of the prediction tools. Appropriate simulations allow strictly necessary laboratory measurements to be identified. In this way, costs are reduced. The demands of new legislation has resulted in the appearance of various software designed to facilitate prediction. The prediction models are based on different hypotheses: adaptation of impedances, spatial behaviour of spectral components, statistical energy distribution, the Finite Element Method (FEM), etc. Each of these models and methods offer advantages and contain limitations. In this paper, different models for prediction…
On the formation of inclusion complexes at the solid/liquid interface of anchored temperature-responsive PNIPAAM diblock copolymers with γ-cyclodextr…
2017
The thermal responsive behavior of adsorbed layers of diblock copolymers of poly(N-isopropylacrylamide) (PNIPAAM) and poly((3-acrylamidopropyl)trimethylammonium chloride) (PAMPTMA(+)) with γ-cyclodextrin (γ-CD) at the solid/liquid interface has been investigated using three in situ techniques: null ellipsometry, quartz–crystal microbalance with dissipation monitoring, and neutron reflectometry. The measurements provided information about the adsorbed amounts, the layer thickness, hydration and viscoelastic properties, and the interfacial structure and composition. The copolymers adsorb to silica with the cationic PAMPTMA(+) blocks sitting as anchors in a flat conformation and the PNIPAAM ch…
Effect of filler on the creep characteristics of epoxy and epoxy-based CFRPs containing multi-walled carbon nanotubes
2014
The aim of this work was to determine the effect of carbon nanotubes (CNTs) on the elastic and viscoelastic properties of an epoxy resin used in carbon fiber-reinforced plastics (CFRPs) in the matrix-dominated flexural testing mode. Neat and CNTs-containing (1. wt.%) epoxy resin and CFRP specimens were prepared and investigated. Three-point bending tests were carried out on nanocomposite (NC) and CFRP specimens at room temperature in quasi-static and cyclic creep regimes. The main effect of CNTs was observed in the reduction of creep compliance of epoxy (40%) and CFRP (30%), especially at higher stresses. The reduction of creep characteristics especially on viscoelastic and plastic strains …
The transition from single layer to foliation boudinage: A dynamic modelling approach
2012
Abstract Foliation boudinage is a deflection of foliation in the vicinity of a central discontinuity in foliated rocks, mostly filled with vein material. It shows evidence for brittle deformation and void-opening during ductile flow. We used a two-dimensional visco-elastic spring model based on a discrete element approach to study the dynamic development of foliation boudinage and the behaviour of anisotropic visco-elastic material deformed under pure shear conditions. The anisotropies are set by defining rheological heterogeneities in the models with (1) a single layer in a weaker matrix; (2) multi-layers with different elastic properties and (3) random-distributed “micas”, rows of horizon…
Modeling in cardiovascular biomechanics
2010
In this review, we briefly summarize some of Professor K.R. Rajagopal's contributions to the field of cardiovascular mechanics and highlight some applications that have employed his theories and have expanded the ability to model the complex behaviors that characterize biological tissues. His contributions, spawning directly from the classical nonlinear theories of mechanics, have had general impact in diverse fields of engineering. Within biomechanics per se, Rajagopal's efforts have provided state-of-the-art modeling tools not only to characterize tissues, such as blood vessels, cerebral aneurysms, or blood, but also to characterize their evolution, i.e. vessel growth and remodeling or bl…