Search results for "Volt"
showing 10 items of 2187 documents
A Simple Method to Assess Loadability of Radial Distribution Networks
2005
This paper proposes a simple method to asses loadability in radial distribution systems. The relevant problem of voltage stability has been dealt with in past times with reference to higher voltage systems for generation and transmission. In more recent papers, the problem has been considered also at distribution level, since the new electrical energy market requirements and the increasing loadings are now more and more influencing these systems. The proposed method is based on a static approach and proceeds by first evaluating the stability indices and then the different loadability factors (related to real, reactive and apparent power). These calculations are carried out by identifying, s…
Low-Power Design of Delay Interpolating VCO
2008
In this paper, a design methodology for low-power MCML based delay interpolating VCOs is presented. The methodology allows a fast and accurate graphical evaluation of the optimum design. It utilizes two closed form expressions for the upper and lower oscillation frequencies of the VCO. An expression of the tuning range is also derived. The effectiveness of the proposed design methodology has been tested by simulating several VCOs in an IBM 0.13 mum CMOS technology.
Electrical-optical characterization of multijunction solar cells under 2000X concentration
2014
In the framework of the FAE "Fotovoltaico ad Alta Efficienza" ("High Efficiency Photovoltaic") Research Project (PO FESR Sicilia 2007/2013 4.1.1.1), we have performed electrical and optical characterizations of commercial InGaP/InGaAs/Ge triple-junction solar cells (1 cm2) mounted on a prototype HCPV module, installed in Palermo (Italy). This system uses a reflective optics based on rectangular off-axis parabolic mirror with aperture 45×45 cm2 leading to a geometrical concentration ratio of 2025. In this study, we report the I-V curve measured under incident power of about 700 W/m2 resulting in an electrical power at maximum point (PMP) of 41.4 W. We also investigated the optical properties…
Power quality effects on the measurement of reactive power in three-phase power systems in the light of the IEEE Standard 1459–2000.
2007
Reactive power is a very important quantity in electric power systems since it affects the efficiency of these systems. Also, capacitive loads can produce over-voltages in electric transformers by Ferranti effect, which produces bad power quality, so it is necessary to measure the reactive power correctly. In this paper reactive phenomena in three-phase power systems with unbalanced voltages are expressed and measured in the light of the IEEE Std 1459-2000. For analyzing the reactive phenomena the positive-sequence fundamental frequency instantaneous reactive power is used. By comparing the expressions of this instantaneous power in three-phase systems with unbalanced voltages with those co…
Phasor total unbalance power: Formulation and some properties
2007
Unbalance power has been used to quantify unbalance phenomenon effects in the electric power systems for a long time. Expressions of this power developed by some different theories only give the value of its module. Therefore, total unbalance power values in electric power systems cannot be obtained by the unbalance power values of each of their loads. For that, it is necessary to express the unbalance power as a complex number. In this paper the unbalance power is expressed in phasor notation and some of their properties are described, applied to electric systems with balanced voltages. Results are verified by simulation and also practical comparative experiences are realized in actual ins…
An economic study about the installation of PV plants reconfiguration systems in Italy
2014
This paper shows the economic convenience of the application of a reconfiguration system for photovoltaic plants, considering the incentives system in Italy and its recent modifications. The reconfiguration is an alternative to the Distributed Maximum Power Point Tracking, DMPPT, technique used to overcome the mismatch problem in Photovoltaic, PV, plants. The reconfiguration techniques employ a microprocessor-based system that modifies the layout of the PV plant by physically changing the connections among modules. After the explanation of the working principle of the PV reconfiguration system allowing the improvement of the efficiency of the same plant and the relevant installation, the ma…
Reconfiguration Techniques of Partial Shaded PV Systems for the Maximization of Electrical Energy Production
2007
In this paper, the research of the optimal layout of photovoltaic (PV) modules in a PV array giving the maximum output power under different shaded working conditions is carried out. The particular condition of non uniform solar exposition of the modules is analyzed. The study of the different configurations has been carried out starting from a circuital model used for the design of PV cells and for the simulation of the working behavior of PV arrays. The attained results appear to be interesting although the complexity of the problem in mathematical terms is huge when the number of panels is high. Moreover, the results confirm that this approach often allows to attain a higher electrical e…
Transition of a distribution system towards an active network. Part II: Economical analysis of selected scenario
2011
This paper outlines the economical issues related to the transition of the energy generation for a real MV/LV distribution system from a ‘fuel based’ one to a distributed and smart ‘renewables based’ one. It is the prosecution of a companion paper, which addressed the technical issues connected to such transition. The study has been carried out by University of Palermo and ENEA (Italy), on a portion of real MV/LV distribution system of the research center ENEA of Casaccia (Rome, Italy). The analysis is carried out for a specific scenario chosen among those proposed in the companion paper.
Higher PV Module Efficiency by a Novel CBS Bypass
2011
There is an increasing focus on reducing costs and improving efficiency for photovoltaic (PV) cells and modules as well as finding a more efficient approach to the product manufacturing. This letter introduces an innovative solution to bypass shaded PV cells instead of a traditional Schottky diode, in order to avoid overheating of cells in the case of partial shading. The goal is to reduce the power dissipation and improve the general efficiency of a PV generator. A novel device called cool bypass switch is then presented. It is made up of a Power MOS driven by a controller with the task to charge a storage capacitor. Tests and comparisons with standard Schottky diodes are then performed an…
A photovoltaic system suitable for the battery pack charging of an electrically power assisted velocipede
2012
The paper describes the designing, sizing, realization and setting up of a complete system suitable for the management of an electrically power assisted velocipede using a photovoltaic module for the charging of the batteries. In the work an overview on the sustainable mobility needs and on the commercial electrically power assisted velocipedes is presented and the "Ecolapa" prototype, set up in the SDELab laboratory of Palermo University, is precisely described underlining the designing, implementation and setting up phases of the photovoltaic charging system settled up on the velocipede. Moreover tests oriented on the setting up of the whole system and validation tests on the prototype ar…