Search results for "WALL"
showing 10 items of 970 documents
Pumice concrete for structural wall panels
2003
Some properties of lightweight pumice stone concrete (LWPSC) are discussed, on account of a possible structural use of this material. Then the results of an experimental investigation are described, in order to show that pumice can really be considered an alternative to common artificial lightweight aggregates, taking into account the performance pointed out by loading tests carried out on structural systems made of LWPSC. Three different kinds of reinforced wall panels were made using LWPSC, lightweight expanded clay concrete and normal weight concrete; then their structural responses under horizontal cyclic and constant vertical forces were compared, above all with reference to lateral st…
Study of the role of particle-particle dipole interaction in dielectrophoretic devices for biomarkers identification
2015
A three dimensional Coupled Monte Carlo-Poisson method has been used to evaluate the impact of particle-particle dipole interactions in the equilibrium distribution of a system of uncharged polarizable particles suspended in a static liquid medium under the action of an oscillating non-uniform electric field generated by polynomial electrodes. We compare the simulated distributions with experimental ones both for micro- (MDA-MB-231 breast tumor cells) and nano-(multiwall carbon nanotubes) particles. In both cases the equilibrium distributions near the electrodes are dominated by dipole interactions which locally enhance the DEP effect and promote long particles chains.
Water-soluble carbon nanotubes through sugar azide functionalization
2011
In this work we report a covalent functionalization of pristine single-walled carbon nanotubes (SWCNTs) directly with three sugar azides, 2,3,4,6-tetra-O-acetyl-β-d-glucopyranosyl, 2,3,4,6-tetra-O-acetyl-β-d-galactopyranosyl or 2,3,4,6-tetra-O-acetyl-β-d-mannopyranosyl azide. Microwave-assisted functionalization was carried out for SWCNTs prepared with the HiPCO method. The as-prepared, new type of sugar-functionalized SWCNTs were analyzed by Raman and IR spectroscopy. Deacetylation of the functionalized tubes by sodium methoxide yielded nitrogen-linked, sugar-functionalized carbon nanotubes (CNTs) that formed stable dispersions in water. Reactivity of the sugar azides towards SWCNTs was es…
An insight into the functionalisation of carbon nanotubes by diazonium chemistry: Towards a controlled decoration
2014
The derivatisation of materials including iron, gold, and carbon by addition of diazonium salts is a reliable process to tune their interfacial interaction with the surrounding media. In this regard, the functionalisation of carbon nanostructures by diazonium chemistry is a versatile strategy to obtain soluble nanomaterials with degrees of functionalisation among the highest ever reported. Starting from these premises we have studied the functionalisation of multi-walled carbon nanotubes by addition of the aryl diazonium salts generated in situ by treatment of 4-methoxyaniline with isopentylnitrite. Following a thorough purification and characterisation protocol (UV-vis, TGA, ATR-IR, cyclic…
Forces and deformations of the abdominal wall—A mechanical and geometrical approach to the linea alba
2011
Force-elongation responses of the human abdominal wall in the linea alba region were determined by tensile tests in which the linea alba was seen to exhibit a nonlinear elastic, anisotropic behavior as is frequently observed in soft biological tissues. In addition, the geometry of the abdominal wall was determined, based on MRI data. The geometry can be specified by principal radii of curvature in longitudinal of approximately 470 mm and in the transverse direction of about 200 mm. The determined radii agree with values found in other studies. Mechanical stresses, deformations and abdominal pressures for load cases above 6% elongation can be related using Laplace's formula and our constitut…
Experimental in situ behaviour of unreinforced masonry elements retrofitted by pre-tensioned stainless steel ribbons
2014
Abstract The results of in situ tests carried out on unreinforced and reinforced poor rubble masonry full-scale walls in the earthquake prone Messina (Italy) area are presented and discussed. This experimental research was aimed at the assessment of the in plane shear behaviour of ancient masonry strengthened with an innovative system for masonry and retrofitting of reinforced concrete element constituted by three-dimensional pre-tensioned stainless steel ribbons. A comparison between different strengthening configurations was made in order to characterise the behaviour of masonry panels under shear-compression load, focusing attention on the diagonal cracking failure mode. The effectivenes…
Electrical conductance of carbon nanotubes with misaligned ends
2013
During a manufacturing process, when a straight carbon nanotube is placed on a substrate, e.g., production of transistors, its two ends are often misaligned. In this study, we investigate the effects of multiwall carbon nanotubes’ (MWCNTs) outer diameter and chirality on the change in conductance due to misalignment of the two ends. The length of the studied MWCNTs was 120 nm, while the diameters ranged between 4 and 7 nm. A mixed finite element-tight-binding approach was carefully designed to realize reduction in computational time by orders of magnitude in calculating the deformation-induced changes in the electrical transport properties of the nanotubes. Numerical results suggest that ar…
Effect of cavity preparation instruments (oscillating or rotating) on the composite-dentin interface in primary teeth.
2003
Abstract Objectives: To evaluate the effect of preparation of instruments on the interfacial integrity between cavity wall and composite restoration. Methods: Two class II slot preparations were done in 10 primary teeth either with SonicSys® or with a conventional bur. The cavities were filled using an adhesive system. One layer of a flowable composite and one layer of a condensable composite were applied. The specimens were analyzed by confocal laser scanning microscopy. Results: In the SonicSys® group the mean thickness of the hybrid layer was 6.12 (0.60) μm; in the control group it was 6.04 (0.63) μm. The difference was not statistically significant. Two fractures were observed in one to…
Influence of cavity preparation technique (rotary vs. ultrasonic) on microleakage and marginal fit of six end-root filling materials
2010
Objectives: To evaluate in vitro the effect of cavity preparation with microburs and diamond-coated ultrasonic tips on the microleakage and marginal fit of six end-root filling materials. Study Design. The following materials were assessed: amalgam (Amalcap), zinc oxide eugenol (IRM), glass ionomer (Vitrebond), compomer (Cavalite), mineral particle aggregate (MTA) and composite (Clearfil). Cavity preparation was performed with microburs or diamond ultrasonic tips in single-root teeth. The seal was evaluated in two experiments: a microleakage assay on the passage of dye to the interface; and a scanning electron microscopy study and analysis of epoxy resin replicas, measuring the size of gaps…
Turbulence structures over irregular rough surfaces
2010
Turbulent flow in a channel with irregular two-dimensional rough surfaces is analysed through wall-resolving large eddy simulation (LES). Both walls of the channel are roughened through the superimposition of sinusoidal functions having random amplitude and four different wavelengths. The downward shift of the velocity profile in the log region due to the roughness, known as roughness function, is well captured in the simulations. The spanwise and wall-normal turbulence intensities are found to increase with the roughness height, while the streamwise component decreases. The analysis of the Reynolds stress anisotropy tensor highlights a tendency towards isotropisation, confirmed by the vort…