Search results for "WASTE"
showing 10 items of 2580 documents
Comparative study of laboratory-scale thermophilic and mesophilic activated sludge processes.
2005
Laboratory-scale mesophilic (20-35 degrees C) and thermophilic (55 degrees C) activated sludge processes (ASPs) treating diluted molasses wastewater were compared in effluent quality, removal of different COD fractions, sludge yield, floc size, and sludge settleability. The effect of polyaluminium chloride (PAC) with high cationic charge on sludge settleability and effluent quality was also studied. In the ASPs, the hydraulic retention time was 12h in both processes, corresponding to a volumetric loading rate of 3.2+/-1.0 kg COD(filt) m(-3)d(-1). The mesophilic ASP gave 79+/-18% and 90+/-2% and the thermophilic ASP gave 50+/-6% and 67+/-11% total COD (COD(tot)) and GF/A-filtered COD (COD(fi…
A spectrophotometric flow procedure for the determination of cationic surfactants in natural waters using a solenoid micro-pump for fluid propulsion
2006
An automatic flow-analysis procedure for spectrophotometric determination of cationic surfactants in surface water using a solenoid micro-pump for propelling solutions of reagents and sample is des...
Dynamic simulation model of a coal thermoelectric plant with a flue gas desulphurisation system
2006
Abstract In this paper a Dynamic Simulation Model has been used to present the likely responses of the electricity industries’ latest perturbations such as: changes in environmental regulations, international fuel market evolution, restriction on fuel supply and increase on fuel prices, liberalisation of the European Electricity Market, and the results of applying energy policies and official tools such as taxes and emission allowances. The case under study refers to the Teruel Power Plant, built after the 1970s oil crisis to ensure national electricity supply; burning domestically produced coal in order to ensure local mining activity. The Teruel Power Plant has made relevant investments i…
Use of The Eggshells in Removing Heavy Metals from Waste Water - The Process Kinetics and Efficiency
2019
Abstract Studies of the efficiency of Ni, Cu and Cd cations removal from water solutions were carried out, with the use of clay limestone, hen eggshells from eggs for consumption and hen eggshells after hatching, which main element is calcium carbonate. Hen eggshells are a waste product, which can be used as a substitute of clay limestone in removing heavy metals from wet flue gas desulphurisation installation. Mixed solutions of Ni, Cu and Cd were used in the research, with the composition similar to the waste water from wet flue gas desulphurisation installation: Ni (0.009-0.053 mmol/dm3), Cu (0.008-0.057 mmol/dm3) and Cd (0.003-0.008 mmol/dm3). The metals were determined by flame atomic …
Urea as a PCDD/F inhibitor in municipal waste incineration.
2001
Emissions of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) from municipal waste incineration have been widely studied because of their extensive toxicity, and many efforts have been made to restrict their emissions. Although a number of chemical compounds have been shown in laboratory-scale tests to inhibit the formation of PCDD/Fs, few have been tested in pilot- or full-scale plants. This work evaluates the effect of urea as a PCDD/F inhibitor in a pilot-scale incinerator that uses refuse-derived fuel (RDF). The decomposition of urea under the test conditions was also studied using detailed kinetic modeling. An aqueous solution of urea was injected into the flue gas stream …
CFD modelling of flue gas particulates in a biomass fired stove with electrostatic precipitation
2013
Abstract The biomass fired stoves have been used in medium and large scales applications from several years and are utilizing electrostatic precipitator technology. Biomass based technologies are considered as renewable energy source and less harmful to the environment. The combustion of biomass generates a high concentration of flue gas particulates. The most of the flue gas particulates in the exhaust gas can be filtered through an electrostatic precipitator. In this work, a computational fluid dynamic (CFD) model has been developed for analysing the trajectory of particulates in a small scale domestic stove using biomass material. It is considered that electrostatic precipitator is based…
Towards controlling PCDD/F production in a multi-fuel fired BFB boiler using two sulfur addition strategies. Part I: Experimental campaign and results
2014
Abstract Levels of PCDD/F production in a 140 MW th bubbling fluidized bed boiler were measured. The boiler uses solid recovered fuel, bark and sludge. Homologue distribution patterns suggest the de novo mechanism is the main pathway for the generation of dioxin and furans in the post combustion zones of the boiler. Two modes of sulfur addition were tested to induce the deactivation of Cu which has been identified as the prime catalyst of this mechanism. First, S-pellet promoted Cu sulfation as supported by aerosol sampling data and resulted in a decrease in PCDD/F levels. The second approach was adding sulfur through peat; this resulted in an increase in PCDD/F concentration. Factors such …
A Solar Pond for Feeding a Thermoelectric Generator or an Organic Rankine Cycle System
2017
The world energy demand is continuously growing, which means an increase in consumption for all modern fuels or stronger effort on the development and improvement of renewable technologies. Moreover, Developing Countries claims more energy and they have often wide unutilized or unusable lands. The solar energy represents a useful opportunity for these Countries. The Solar Pond is both a solar collector and a thermal storage for long period and is suitable to use in wide sunny areas. Solar pond technology is able to supply heat for several applications requiring low-grade thermal energy or for electrical power production. In order to produce electrical energy from solar ponds it is necessary…
Voltammetric and electrodeposition study for the recovery of antimony from effluents generated in the copper electrorefining process
2023
Antimony is a metalloid with limited availability as a primary resource, but it is commonly found as an impurity in effluents generated in the copper metallurgy. Thus, the development of clean and selective processes to recover antimony from these wastewaters would improve the sustainability of the copper production. In this work, an emulated effluent of the copper electrorefining industry that contains antimony and hydrochloric acid was characterized by means of voltammetric and electrodeposition tests using two different cell configurations: a static cell, and a dynamic cell with a rotating disk electrode (RDE). Voltammograms were obtained at varying hydrochloric acid and antimony concent…
Distribution and fate of perfluoroalkyl substances in Mediterranean Spanish sewage treatment plants.
2014
The concentrations of 21 perfluoroalkyl substances (PFASs: C4-C14, C16, C18 carboxylates, C4, C6-C8 and C10 sulfonates and C8 sulfonamide) were determined in influent, effluent and sludge from 16 different sewage treatment plants (STPs) located in the Ebro (6), Guadalquivir (5), Jucar (2) and Llobregat (3) Rivers, in two consecutive years (2010 and 2011). The analytes were extracted by solid phase extraction (SPE) and determined by Liquid Chromatography triple Quadrupole Mass Spectrometer (LC-QqQ-MS). All samples, except two sludges from Guadalquivir River STPs, were contaminated with at least one PFAS. Perfluorobutanoate (PFBA), perfluoropentanoate (PFPeA) and perfluorooctane sulfonate (L-…