Search results for "WASTE"

Identification of effective parameters for anti-inflammatory concentration in València City's wastewater using fuzzy-set qualitative comparative anal…

2019

The current literature about pharmaceutical and personal care compounds (PPCPs) focuses on identifying their concentration and toxicological risk both in surface water and in wastewater. However, the influence of urban areas (population ageing, income level, hospitals and others) has not yet been analysed. Knowing how a population (and its facilities) affects PPCPs' presence in wastewater is important to identify the conditions that are responsible for their presence. In this work, the influence of water consumption, population ageing, income level, hospitals and nursing homes on the anti-inflammatory concentration have been analysed. To fill the gap between the quantitative data on PPCPs' …

Management of tannery wastewaters: treatment of spent chrome tanning bath and vegetable tanning effluents

2013

Abstract In this work, a chain of treatment processes was proposed and described in order to reach better management of mineral and vegetable tannery wastewaters. First, chromium was precipitated from the spent chrome tanning bath by sodium hydroxide (NaOH) and then reformulated to form a complex of basic chromium sulfate which was tested successfully in mineral tanning process. On the other hand, the supernatant recovered after precipitation of chromium with NaOH was used to dilute vegetable tanning wastewaters characterized by a high concentration of polyphenols (about 2,574 mg/L). Diluted effluent was then treated by liming and tangential microfiltration using a ceramic membrane based on…

Fate of aerobic granular sludge in the long-term: The role of EPSs on the clogging of granular sludge porosity

2016

This work aims to investigate the stability of aerobic granular sludge in the long term, focusing on the clogging of the granular sludge porosity exerted by the extracellular polymeric substances (EPSs). The effects of different cycle lengths (short and long-term cycle) on the granular sludge stability were investigated. Results obtained outlined that during the short duration cycle, the formation and breakage of the aerobic granules were continuously observed. During this period, the excess of EPS production contributed to the clogging of the granules porosity, causing their breakage in the long run. During the long-duration cycle, the extended famine period entailed a greater EPSs consump…

Rainwater Reuse in Urban Areas: A Mathematical Model and a Long-Term Modelling Approach

2018

Natural water resources are becoming increasingly limited due to global-scale climate change and water availability issues have become so severe that they must be addressed. Given these issues, reuse of wastewater and rainwater provides a promising way to cope with water shortages. This paper describes an investigation into the efficiency of rainwater usage systems. A conceptual model was built to assess the behaviour of rainwater tanks and their effectiveness in coping with water shortages. The study is based on a long-term simulation (12 years) of different rainwater reuse tank schemes. The associated reductions in residential freshwater demand (water reuse efficiency) and wet-weather run…

Effect of pre-treatments based on UV photocatalysis and photo-oxidation on toluene biofiltration performance

2011

BACKGROUND: The integration of UV photocatalysis and biofiltration seems to be a promising combination of technologies for the removal of hydrophobic and poorly biodegradable air pollutants. The influence of pre-treatments based on UV254 nm photocatalysis and photo-oxidation on the biofiltration of toluene as a target compound was evaluated in a controlled long-term experimental study using different system configurations: a standalone biofilter, a combined UV photocatalytic reactor-biofilter, and a combined UV photo-oxidation reactor (without catalyst)-biofilter. RESULTS: Under the operational conditions used (residence time of 2.7 s and toluene concentrations 600–1200 mg C m−3), relativel…

Characterization of pre-treatments on wood chips prior to delignification by near infrared spectroscopy

2017

A near infrared (NIR) spectroscopy-based method for predicting yields and lignin contents of differently pre-treated silver/white birch (Betula pendula/B. pubescens) and Scots pine (Pinus sylvestris) chips was developed. The approach was to create multivariate calibration models from the NIR data by the partial least squares (PLS) method. Both parameters are important factors when adjusting adequate conditions for pre-treatments either with hot-water (HW) as such and slightly acidified HW (collectively referred to as autohydrolysis) or dilute alkaline aqueous solutions prior to alkaline pulping. Pre-treatment conditions were varied with respect to temperature (130 °C and 150 °C) and treatme…

Treatment of high strength industrial wastewater with membrane bioreactors for water reuse: Effect of pre-treatment with aerobic granular sludge on s…

2019

Abstract In this study, the treatment of citrus wastewater with membrane bioreactors (MBRs) under different configurations was investigated for water reuse. In particular, one MBR and one aerobic granular sludge MBR (AGS + MBR) bench scale plants were operated for 60 days. The experimental campaign was divided into two periods. In Phase I, a conventional hollow fiber MBR was employed for the treatment of the raw high strength wastewater, whereas in Phase II a combination of in-series reactors (AGS + MBR) was adopted for the treatment of the high strength citrus wastewater The results demonstrated that both plant configurations enabled very high COD removal, with average values close to 99%.…

Mechanical pre-treatment for separation of bio-waste from municipal solid waste: case study of district in Latvia

2019

Characterization of refuse derived fuel production from municipal solid waste: the case studies in Latvia and Lithuania

2020

Abstract The authors determined the morphological composition of refuse derived fuel (RDF) produced in Latvia and Lithuania by manually sorting. The parameters of RDF (moisture, net calorific value, ash content, carbon, nitrogen, hydrogen, sulphur, chlorine, metals) was determined using the EN standards. Comparing obtained results with data from literature, authors have found that the content of plastic is higher but paper and cardboard is lower than typical values. Results also show that the mean parameters for RDF can be classified with the class codes: Net heating value (3); chlorine (3); mercury (1), and responds to limits stated for 3rd class of solid recovered fuel. It is recommended …

Modelling biological and chemically induced precipitation of calcium phosphate in enhanced biological phosphorus removal systems

2011

The biologically induced precipitation processes can be important in wastewater treatment, in particular treating raw wastewater with high calcium concentration combined with Enhanced Biological Phosphorus Removal. Currently, there is little information and experience in modelling jointly biological and chemical processes. This paper presents a calcium phosphate precipitation model and its inclusion in the Activated Sludge Model No 2d (ASM2d). The proposed precipitation model considers that aqueous phase reactions quickly achieve the chemical equilibrium and that aqueous-solid change is kinetically governed. The model was calibrated using data from four experiments in a Sequencing Batch Rea…