Search results for "Wastewater treatment"
showing 10 items of 178 documents
Challenges and opportunities for citrus wastewater management and valorisation: A review.
2022
Citrus wastewaters (CWWs) are by-products of the citrus fruit transformation process. Currently, more than 700 million of m³ of CWWs per year are produced worldwide. Until nowadays, the management of CWWs is based on a take-make-use-dispose model. Indeed, after being produced within a citrus processing industry, CWWs are subjected to treatment and then discharged into the environment. Now, the European Union is pushing towards a take-make-use-reuse management model, which suggests to provide for the minimization of residual pollutants simultaneously with their exploitation through a biorefinery concept. Indeed, the recovery of energy nutrients and other value-added products held by CWWs may…
Shortcut nitrification-denitrification by means of autochthonous halophilic biomass in an SBR treating fish-canning wastewater
2017
Abstract Autochthonous halophilic biomass was cultivated in a sequencing batch reactor (SBR) aimed at analyzing the potential use of autochthonous halophilic activated sludge in treating saline industrial wastewater. Despite the high salt concentration (30 g NaCl L −1 ), biological oxygen demand (BOD) and total suspended solids (TSS), removal efficiencies were higher than 90%. More than 95% of the nitrogen was removed via a shortcut nitrification-denitrification process. Both the autotrophic and heterotrophic biomass samples exhibited high biological activity. The use of autochthonous halophilic biomass led to high-quality effluent and helped to manage the issues related to nitrogen removal…
A fugacity model assessment of ibuprofen, diclofenac, carbamazepine, and their transformation product concentrations in an aquatic environment
2018
An updated version of FATEMOD, a multimedia fugacity model for environmental fate of organic chemicals, was set up to assess environmental behaviour of three pharmaceuticals in northern Lake Päijänne, Finland. Concentrations of ibuprofen, diclofenac, and carbamazepine were estimated at various depths at two sites: near a wastewater treatment plant and 3.5 km downstream the plant. When compared with environmental sampling data from corresponding depths and sites, the predicted concentrations, ranging from nanograms to hundreds of nanograms per litre, were found to be in good agreement. Weather data were utilised with the model to rationalise the effects of various environmental parameters on…
Dynamic Membranes for Enhancing Resources Recovery from Municipal Wastewater
2022
[EN] This paper studied the feasibility of using dynamic membranes (DMs) to treat municipal wastewater (MWW). Effluent from the primary settler of a full-scale wastewater treatment plant was treated using a flat 1 mu m pore size open monofilament polyamide woven mesh as supporting material. Two supporting material layers were required to self-form a DM in the short-term (17 days of operation). Different strategies (increasing the filtration flux, increasing the concentration of operating solids and coagulant dosing) were used to enhance the required forming time and pollutant capture efficiency. Higher permeate flux and increased solids were shown to be ineffective while coagulant dosing sh…
Energy generation and abatement of Acid Orange 7 in reverse electrodialysis cells using salinity gradients
2015
Abstract The simultaneous generation of electric energy and the treatment of wastewaters contaminated by an organic pollutant resistant to conventional biological processes, Acid Orange 7 (AO7), was achieved for the first time using proper redox processes by reverse electrodialysis using salinity gradients. The stack was fed with two aqueous solutions with different concentrations of NaCl and a synthetic wastewater contaminated by AO7. Various electrochemical approaches including electro-Fenton, electrogeneration of active chlorine (IOAC) and coupled process were performed in a stack equipped with 40–60 cell pairs and studied by focused electrolyses. The effect of the number of cell pairs a…
Electrochemical abatement of chloroethanes in water: Reduction, oxidation and combined processes
2010
An electrochemical route, based on the anodic oxidation to carbon dioxide coupled with the cathodic reduction to de-halogenated hydrocarbons, was proposed for the treatment of waters contaminated by chloroethanes. The electrochemical abatement of two model compounds, namely 1,2-dichloroethane and 1,1,2,2-tetrachloroethane, was carried out by cathodic reduction at silver, anodic oxidation at boron doped diamond (BDD) and combined processes. The anodic oxidation gives rise to a high abatement of the concentration of both these compounds and of COD. The reduction of 1,1,2,2-tetrachloroethane proceeds also with high abatement but with the formation of some halogenated intermediates and final pr…
Assisted reverse electrodialysis for CO2 electrochemical conversion and treatment of wastewater: A new approach towards more eco-friendly processes u…
2020
Abstract In this paper, the utilization of assisted reverse electrodialysis (A-RED), recently used for pre-desalination, is proposed as a general method to reduce the energy requirements of electrolysis processes and evaluated for two model processes: (i) the cathodic conversion of carbon dioxide to formic acid; (ii) the anodic treatment of water contaminated by organics. In A-RED, two solutions with different salt content and an external potential difference, applied in the direction of the natural salinity gradient, are both used to drive redox processes. It was shown, for the first time, that the cathodic conversion of CO2 to formic acid can be performed by both reverse electrodialysis (…
Designing an AnMBR-based WWTP for energy recovery from urban wastewater: The role of primary settling and anaerobic digestion
2015
The main objective of this paper is to assess different treatment schemes for designing a submerged anaerobic membrane bioreactor (AnMBR) based WWTP. The economic impact of including a primary settling (PS) stage and further anaerobic digestion (AD) of the wasted sludge has been evaluated. The following operating scenarios were considered: sulphate-rich and low-sulphate urban wastewater (UWW) treatment at 15 and 30 ºC. To this aim, the optimum combination of design/operating parameters that resulted in minimum total cost (CAPEX plus OPEX) for the different schemes and scenarios was determined. The AnMBR design was based on both simulation and experimental results from an AnMBR plant featuri…
DSC: software tool for simulation-based design of control strategies applied to wastewater treatment plants.
2011
This paper presents a computer tool called DSC (Simulation based Controllers Design) that enables an easy design of control systems and strategies applied to wastewater treatment plants. Although the control systems are developed and evaluated by simulation, this tool aims to facilitate the direct implementation of the designed control system to the PC of the full-scale WWTP (wastewater treatment plants). The designed control system can be programmed in a dedicated control application and can be connected to either the simulation software or the SCADA of the plant. To this end, the developed DSC incorporates an OPC server (OLE for process control) which facilitates an open-standard communic…
A Graphical User Interface as a DSS Tool for GHG Emission Estimation from Water Resource Recovery Facilities
2017
A Grafical User Interface (GUI) for the greenhouse gas (GHG) emissions from WWTPs based on four models aimed at quantifying the gas emissions from the aerated tanks (i.e. CAS and MBR reactor), aerobic digesters, secondary clarifiers and anaerobic digesters have been englobed in a GUI in order to provide a valid decision support system (DSS) to the practitioners. The GUI allows to estimate such emissions for the different WWTP phases considered. The GUI has been developed on MATLAB platform and provides as output the GHG emissions in terms of CO2 and N2O fluxes.