Search results for "Water flow"

showing 10 items of 82 documents

Autohydrolysis pretreatment of Arundo donax: a comparison between microwave-assisted batch and fast heating rate flow-through reaction systems

2015

Background: Autohydrolysis of lignocellulosic biomass in liquid hot water has been widely studied owing to its high efficiency and relatively low cost. In the perspective of industrial applications, continuous or semi-continuous processes are more interesting than batch systems. Moreover, microwave heating of pretreatment systems has been proposed to intensify the kinetics of the process. In this study, the autohydrolysis of Arundo donax was performed in pure liquid hot water using a microwave-heated batch reactor and a semi-continuous flow-through reaction system with fast heating rate at the same operating conditions with the aim of performing a systematic comparison between the two diffe…

Materials scienceMonitoringWater flowBatch reactorLignocellulosic biomassBiomassManagement Monitoring Policy and LawApplied Microbiology and BiotechnologyMass transferAutohydrolysis; Flow-through system; Lignocellulosic biomass; Liquid hot water; Microwaves; Pretreatment; Energy (all); Management Monitoring Policy and Law; Biotechnology; Applied Microbiology and Biotechnology; Renewable Energy Sustainability and the EnvironmentRenewable EnergyMicrowavesFlow-through systembiologyPolicy and LawSustainability and the EnvironmentRenewable Energy Sustainability and the Environmentbusiness.industryResearchArundo donaxLiquid hot waterSettore ING-IND/27 - Chimica Industriale E Tecnologicabiology.organism_classificationPulp and paper industryLignocellulosic biomassBiotechnologyManagementGeneral EnergyEnergy (all)AutohydrolysisScientific methodbusinessMicrowavePretreatmentBiotechnologyBiotechnology for Biofuels
researchProduct

The use of phage FCL-2 as an alternative to chemotherapy against columnaris disease in aquaculture

2015

Flavobacterium columnare, the causative agent of columnaris disease in fish, causes millions of dollars of losses in the US channel catfish industry alone, not to mention aquaculture industry worldwide. Novel methods are needed for the control and treatment of bacterial diseases in aquaculture to replace traditionally used chemotherapies. A potential solution could be the use of phages, i.e., bacterial viruses, host-specific and self-enriching particles that can be can easily distributed via water flow. We examined the efficacy of phages to combat columnaris disease. A previously isolated phage, FCL-2, infecting F. columnare, was characterized by sequencing. The 47 142 bp genome of the phag…

Microbiology (medical)phage therapyanimal structuresPhage therapyWater flowvirusesFish farmingmedicine.medical_treatmentPopulationlcsh:QR1-502BiologyMicrobiologylcsh:MicrobiologyMicrobiologyFlavobacterium columnareAquaculturemedicine14. Life underwatereducation1183 Plant biology microbiology virologyOriginal Researchfishdiseaseeducation.field_of_studybiologybusiness.industryta1183biology.organism_classification6. Clean wateraquacultureFlavobacterium columnareRainbow troutBacterial virusbusinessphagetherapyFrontiers in Microbiology
researchProduct

Changes in the flow and quality of water in the dam reservoir of the Mała Panew catchment (South Poland) characterized by multidimensional data analys…

2023

Multidimensional exploratory techniques, such as the Principal Component Analysis (PCA), have been used to analyze long-term changes in the fl ow regime and quality of water of the lowland dam reservoir Turawa (south-west Poland) in the catchment of the Mała Panew river (a tributary of the Odra). The paper proves that during the period of 1998–2016 the Turawa reservoir was equalizing the river’s water fl ow. Moreover, various physicochemical water quality indicators were analyzed at three measurement points (at the tributary’s mouth into the reservoir, in the reservoir itself and at the outfl ow from the reservoir). The water quality assessment was performed by analyzing physicochemical ind…

Multidimensional analysisHydrologyPrincipal Component Analysis (PCA).geographygeography.geographical_feature_categoryWater flowFlow (psychology)Drainage basinGeneral Medicinewater reservoir; river; water fl ow; water quality; multidimensional data analysisStream flowEnvironmental scienceStatistical analysisWater qualityTotal suspended solidsArchives of Environmental Protection
researchProduct

Computational and experimental studies of the flow field near the beam entrance window of a liquid metal target

2014

Abstract After the first world liquid metal target has been successfully operated at the SINQ facility at the Paul Scherrer Institut (PSI) for 6 months. The idea of having a reliable target with a bypass flow for cooling the beam entrance window, but with the bypass flow not driven by a separate pump, was examined within the project called LIMETS (Liquid Metal Target for SINQ). In designing of liquid metal targets, turbulence modelling is of high importance due to lack in methods for measuring the spatial distribution of flow and turbulence characteristics. In this study, validation of different turbulence models were performed in water model with hemispherical geometry using particle image…

Nuclear and High Energy PhysicsEngineeringLiquid metalbusiness.industryTurbulenceWater flowK-epsilon turbulence modelMechanical EngineeringMechanicsPhysics::Fluid DynamicsOpticsNuclear Energy and EngineeringParticle image velocimetryTurbulence kinetic energyGeneral Materials ScienceSafety Risk Reliability and QualitybusinessReynolds-averaged Navier–Stokes equationsWaste Management and DisposalLarge eddy simulationNuclear Engineering and Design
researchProduct

Storm sewer pressurization transient – an experimental investigation

2014

Pipe pressurization is examined experimentally by 144 laboratory experiments in a circular tilting pipe between two tanks, in which the transient was triggered by sudden closing of the downstream tank outlet. The experiments cover ranges of values of slope, velocity and filling ratio of the open-channel flow not explored in previous studies. Situations involving considerable air quantity and consequent intense pressure oscillations were also reproduced. Two different pressurization patterns, defined as “smooth” and “abrupt”, were observed, but only the abrupt pattern produced intense pressure oscillations. The comparison among all the abrupt pressurization surges showed how the oscillations…

OscillationFlow (psychology)StormVolumetric flow rateSettore ICAR/01 - IdraulicaPhysics::Fluid DynamicsFilling ratioCabin pressurizationEnvironmental scienceAir–water flow pressurization storm sewer system transition unsteady flow urban drainageGeotechnical engineeringTransient (oscillation)Intensity (heat transfer)Water Science and TechnologyCivil and Structural Engineering
researchProduct

Trends of organochlorine compounds in Finnish inland waters

2001

Caged common lake mussels (Anodonta piscinalis) have been used in the monitoring of organochlorine compounds in pulp and paper mill recipient watercourses of Finland annually from 1984 to 1998. Statistically significant decreasing trends of chlorophenols and chloroguaiacols originating from chlorobleaching were observed in all recipients in parallel with the decreasing discharges from the mills. Metabolites of chlorophenols, chloroanisoles and chloroveratroles had no or slightly increasing trends. Elevated PCB concentrations were measured in four watercourses. In two areas, PCBs were found to be significantly increasing, in two other cases they showed no trend. A mill producing recycled pap…

PaperAnodontaWater flowHealth Toxicology and MutagenesisFresh WaterAnisolesWaste Disposal FluidDDTAnimalsIndustryEnvironmental ChemistryEcotoxicologyLongitudinal StudiesOrganic ChemicalsIncubationFinlandbiologyChemistrybusiness.industryfood and beveragesPaper millGeneral MedicineMusselbiology.organism_classificationPolychlorinated BiphenylsPollutionBivalviaData Interpretation StatisticalEnvironmental chemistrySuspended matterChlorine CompoundsbusinessHexachlorocyclohexaneWater Pollutants ChemicalChlorophenolsEnvironmental MonitoringEnvironmental Science and Pollution Research
researchProduct

On the use of a laboratory-scale Pelton wheel water turbine in renewable energy education

2008

Abstract A laboratory-scale Pelton turbine for hydroelectric generation has been constructed and used in the educational curriculum of The Renewable Energy Programme at the University of Jyvaskyla. The construction of the Pelton turbine, the experimental apparatus and the measurement procedure are described. The apparatus is simple to make and uses inexpensive components, most of which can be found in standard science laboratories. From the experimental results, the turbine was found to have a maximum mechanical efficiency of 0.47 ± 0.02 for a water flow rate of 0.17 l / s . The Pelton turbine and apparatus demonstrate the principles of hydropower and are well suited for education in renewa…

Pelton wheelEngineeringRenewable Energy Sustainability and the Environmentbusiness.industryWater flowWater turbineMechanical engineeringHydraulic machineryLaboratory scalebusinessTurbineHydropowerRenewable energyRenewable Energy
researchProduct

On the hydraulic behaviour of ITER Shield Blocks #14 and #08. Computational analysis and comparison with experimental tests

2016

Abstract As a consequence of its position and functions, the ITER blanket system will be subjected to significant heat loads under nominal reference conditions. Therefore, the design of its cooling system is particularly demanding. Coolant water is distributed individually to the 440 blanket modules (BMs) through manifold piping, which makes it a highly parallelized system. The mass flow rate distribution is finely tuned to meet all operation constraints: adequate margin to burn out in the plasma facing components, even distribution of water flow among the so-called plasma-facing “fingers” of the Blanket First Wall panels, high enough water flow rate to avoid excessive water temperature in …

Pressure dropPipingComputer scienceWater flowMechanical EngineeringNuclear engineeringFull scaleBlanket CFD analysis HydraulicsBlanket01 natural sciences010305 fluids & plasmasCoolantNuclear Energy and Engineering0103 physical sciencesWater coolingMass flow rateGeneral Materials Science010306 general physicsSettore ING-IND/19 - Impianti NucleariCivil and Structural EngineeringFusion Engineering and Design
researchProduct

Control of VOC emissions from a flexographic printing facility using an industrial biotrickling filter.

2011

The study of an industrial unit of biotrickling filter for the treatment of the exhaust gases of a flexographic facility was investigated over a 2-year period with the objective to meet the volatile organic compound (VOC) regulatory emission limits. Increasing the water flow rate from 2 to 40 m3 h−1 improved the performance of the process, meeting the VOC regulation when 40 m3 h−1 were used. An empty bed residence time (EBRT) of 36 s was used when the inlet air temperature was 18.7 °C, and an EBRT as low as 26 s was set when the inlet temperature was 26.8 °C. During this long-term operation, the pressure drop over the column of the bioreactor was completely controlled avoiding clogging prob…

Pressure dropchemistry.chemical_classificationAir PollutantsVolatile Organic CompoundsEnvironmental EngineeringWaste managementSewageWater flowResidence time (fluid dynamics)Filter (aquarium)CloggingBioreactorschemistryFlexographyvisual_artAir PollutionBioreactorvisual_art.visual_art_mediumPressureEnvironmental sciencePrintingVolatile organic compoundFiltrationWater Science and TechnologyWater science and technology : a journal of the International Association on Water Pollution Research
researchProduct

The impact of effluents of Pitkäranta pulp mill on the water quality of Lake Ladoga: a model study

1996

The aim of this study is to show the effects of the Pitkaranta pulp mill on the water quality of Northern Ladoga by using water quality models. The effluent loading of the pulp mill with its full production capacity is as follows: Water flow 85 000 m3 d−1 BOD5 2.4 t d−1 Suspended solids 4.1 t d−1 tot-N 330 kg d−1 tot-P 68 kg d−1 COD(Cr) 14.4 t d−1 Org. C 6 t d−1 Lignosulphonates 9.4 t d−1 Loadings of lignosulphonates and organic C are estimations. Lignosulphonate concentrations of 10.5 mg 1−1 have been reported in the region of Pitkaranta. The study area of northern Ladoga near the pulp mill was divided into three zones (I, II and III). The mean depth of each of them is considered as 10 m, …

Pulp millSuspended solidsWater flowbusiness.industryPhosphoruschemistry.chemical_elementPaper millPulp and paper industrychemistryEnvironmental scienceWater qualityEutrophicationbusinessEffluent
researchProduct