Search results for "Water science"
showing 10 items of 1545 documents
Determination of limiting current density and current efficiency in electrodialysis units
2018
Abstract A crucial parameter for the design and operation of electrodialysis (ED) units is the limiting current density (LCD). This is often identified with the diffusion-limited current density, which corresponds to the complete solute depletion in the layer adjacent to the membrane. Current-voltage curves obtained from measurements with electrodes in contact with the solution (i.e. without membranes) are consistent with this interpretation and exhibit a horizontal plateau identifying LCD. However, real ED systems show more complex behaviours, with a reduced-slope tract instead of a plateau and a third region in which the current increases more markedly (overlimiting current). The phenomen…
Membrane distillation heat transfer enhancement by CFD analysis of internal module geometry
2011
Module geometry optimisation can be a crucial matter in all separation processes using selective or hydrophobic membranes, e.g. reverse osmosis (RO) and membrane distillation (MD). In fact the choice of suitable channel shape and size can dramatically affect the performance of the process. With reference to the membrane distillation process, temperature polarization phenomena and pres¬sure drops along the channels largely affect the process efficiency (i.e. the efficient use of temperature driving force for the passage of vapour through the membrane) as well as pressure distribution, module mechanical resistance and pumping costs. Several works have been presented so far in literature on th…
Dip Phenomenon in High-Curved Turbulent Flows and Application of Entropy Theory
2018
The estimation of velocity profile in turbulent open channels is a difficult task due to the significant effects of the secondary flow. The present paper investigates the mechanism of the velocity-dip phenomenon, whereby the location of the maximum velocity appears to be below the free surface. Previous studies conducted in straight channels relate the mechanism of the velocity-dip phenomenon to secondary flow induced by anisotropy of turbulence. This work focuses on high-curved channels where the secondary motion, which is also induced by the channel’s curvature, evolves along the bend. The width-to-depth ratio, B/h, is one of the most important parameters that are affecting the secondary …
Electrical conductivity as a state indicator for the start-up period of anaerobic fixed-bed reactors.
2016
The aim of this work was to analyse the applicability of electrical conductivity sensors for on-line monitoring the start-up period of an anaerobic fixed-bed reactor. The evolution of bicarbonate concentration and methane production rate was analysed. Strong linear relationships between electrical conductivity and both bicarbonate concentration and methane production rate were observed. On-line estimations of the studied parameters were carried out in a new start-up period by applying simple linear regression models, which resulted in a good concordance between both observed and predicted values. Electrical conductivity sensors were therefore identified as an interesting method for monitori…
Discussion of "Hydraulic Model of Transition of Transient to Steady Flows in the Vadose Zone" by Yaguo Zhang, Tonglu Li, Wei Shen, and Yu Wang
2020
The authors wrote an interesting article dealing with a simple hydraulic model to illustrate the transition mechanism of transient to steady flows in the vadose zone. The soil behavior is described by a set of nine vertically aligned cylinders, each opened at the top and with a small outlet at the bottom. The water level dynamic of each cylinder, associated with an intermittent constant rainfall applied to the top cylinder, C0, was analyzed and numerical simulations were performed. The only objective of this discussion is to show that results similar to those proposed by the authors could be obtained by using the recently introduced Richards equation analytical solution, under gravity-drive…
Impact de l'épandage des boues sur le phosphore dissous et particulaire des écoulements de surface
2003
Abstract The aim of this study was to assess the effect of land application of sewage sludge on phosphorus (P) losses during intense rainfall. Three rainfall simulations (40 mm h−1 of 30 min duration) were conducted on a field amended with sewage sludge. The overland flow water (OFW) was monitored and sampled every minute. The suspended solid, the dissolved and total phosphorus (respectively SS, TP and DP) concentrations were analysed. The forms of particulate bound P (PP) were investigated. Several results stem from this experiment: (a) sludge application induced a large increase in the DP content of the OFW; the concentrations obtained (0.15–0.57 mg l−1) were shown to result from desorpti…
Dissolved silica in the Garonne River waters : changes in the weathering dynamics
2000
The major ion chemistry of the Garonne River is indicative of seasonal variations in the weathering dynamics of the drainage basin. Using the geochemical model MEGA for calculation of the contribution of atmospheric CO2 to the total bicarbonate fluxes exported by the Garonne River allows estimations of the concentrations of the major dissolved elements that originate from silicate- and carbonate-rock weathering. The molecular ratio SiO2/Al2O3 was calculated for the 1989–1992 period to identify the main type of weathering in the Garonne River, and montmorillonite was shown to be the major mineral occurring in the weathering products. The seasonal variations of the SiO2/Al2O3 ratio also showe…
Alachlor and Bentazone Losses from Subsurface Drainage of Two Soils
2004
International audience; Atrazine (6-chloro-N2-ethyl-N4-isopropyl-1,3,5-triazine-2,4-diamine) is frequently detected at high concentrations in ground water. Bentazone [3-isopropyl-1H-2,1,3-benzothiadiazin-4(3H)-one 2,2-dioxide] plus alachlor (2-chloro-2',6'-diethyl-N-methoxymethylacetanilide) is a potential herbicide combination used as a substitute for atrazine. Thus, the objective of this study was to assess the environmental risk of this blend. Drainage water contamination by bentazone and alachlor was assessed in silty clay (Vertic Eutrochrept) and silt loam (Aquic Hapludalf) soils under the same management and climatic conditions. Drainage volumes and concentrations of alachlor and bent…
Degradation of 2,4‐D, 2,4‐Dichlorophenol, and 4‐Chlorophenol in Soil after Sorption on Humified and Nonhumified Organic Matter
1999
Soil organic matter (SOM) primarily governs sorption processes and therefore affects the availability of organic chemicals to degrading microorganisms. Transformations of 14 C-ring-labeled 2,4-dichlorophenoxyacetic acid (2,4-D); 2,4-dichlorophenol (2,4-DCP); and 4-chlorophenol (4-CP) sorbed on organic materials with increasing degrees of humification (wood, fresh straw, composted straw, ligain, and humic acid) and on a reference mineral sorbent (Al-oxide) were studied during soil incubation experiments. Chemicals previously sorbed on the different sorbents were applied to the soil. Mineralization kinetics, analysis of water and methanol extracts and measurements of the nonextractable radioa…
Removal of selected antibiotics and antiretroviral drugs during post‐treatment of municipal wastewater with UV, UV/chlorine and UV/hydrogen peroxide
2020
Active pharmaceutical ingredients (APIs) are only partially removed by convectional wastewater treatment plants. This study aimed at assessing the post‐treatment degradation of selected antibiotics and antiretroviral drugs by direct UV photolysis and advanced oxidation processes (UV/H2O2 and UV/Cl2) using low‐pressure mercury lamp. The rate of degradation largely followed pseudo first‐order reaction kinetics. Amongst the six studied APIs, sulfamethoxazole, ciprofloxacin and zidovudine were readily degraded by more than 90% using direct UV photolysis. Addition of Cl2 and H2O2 to the UV process led to an increase in the rate of degradation for all the compounds. The effectiveness UV/Cl2 proce…