Search results for "Wireless"
showing 10 items of 879 documents
An efficient wireless power transfer prototype for electrical vehicles
2017
Based on the inductive power transfer (IPT), the contactless approach allows safe and comfortable operations of battery charging for Electric Vehicles (EVs). In this paper, a contactless system particularly suitable for E-bike battery charging is proposed. A practical realization of the system has been carried out, aiming at the system evaluation in terms of working and efficiency. Through a phase shift modulation, a power regulation has been implemented. The target power level is 100 W.
Wireless Power Transmission for house appliances: A small-scale resonant coupling prototype
2016
This paper presents a low cost prototype of wireless power transfer system based on resonant coupling. The system here proposed can be useful for house appliances battery charging systems: as a matter of fact, it consists mainly of two copper wire coils or windings, placed one in front of the other on the same axis. By exploiting the coils resonance coupling effect, electric energy can be transferred from the inductor coil to the receiver in order to charge the batteries. Low cost experimental tests demonstrated the effectiveness of the proposed wireless power transfer prototype, being it capable to reach an efficiency of about 80% and more along a distance of 30 cm.
Self-Powered IoT Device for Indoor Applications
2018
This paper presents a proof of concept for selfpowered Internet of Things (IoT) device, which is maintenance free and completely self-sustainable through energy harvesting. These IoT devices can be deployed in large scale and placed anywhere as long as they are in range of a gateway, and as long as there is sufficient light levels for the solar panel, such as indoor lights. A complete IoT device is designed, prototyped and tested. The IoT device can potentially last for more than 5 months (transmission interval of 30 seconds) on the coin cell battery (capacity of 120mAh) without any energy harvesting, sufficiently long for the dark seasons of the year. The sensor node contains ultra-low pow…
Design and implementation of a long-range low-power wake-up radio for IoT devices
2019
In this paper, we present the design and implementation of an on-demand wake-up radio (WuR) for long-range wireless IoT devices to reduce the power consumption, thereby increasing the life time of the devices. A custom narrow-band (NB) low noise amplifier is designed and implemented for WuR. The low-noise amplifier achieves a gain of 31 dB at 1 mA current consumption from a 6 V power supply. The WuR achieves a sensivity of -80 dBm by consuming just 1 mA, thereby optimizing the energy consumption of battery powered long-range IoT devices, hence reducing the power consumption and overall costs when deployed in large scale.
An energy autonomous and battery-free measurement system for ambient light power with time domain readout
2021
Abstract Internet of Things (IoT) provides more and more adequate infrastructures for many applications and advanced services. This context promotes the ability to satisfy the growing demand for innovative measuring systems, increasingly popular with intelligent nodes, totally wireless, easy to install that require the least possible maintenance. This paper aims to contribute to the state-of-the-art with an energy-autonomous and battery-free measurement platform designed to measure the ambient light power when its level exceeds the Limit of Detection (LoD) threshold. The proposed system consists of a single photovoltaic transducer to harvest energy and simultaneously detect ambient light. T…
A Bidirectional IPT system for Electrical Bicycle Contactless Energy Transfer
2019
Contactless Energy Transfer characterized by Inductive Power Transfer (IPT) is a viable solution for Electric Vehicle (EV) battery charging, giving advantages in terms of safety, comfort and automatism of the recharging operation. IPT is a smart option for the Vehicle- To-Grid (V2G) implementation as well: the EV's battery can provide power to other users, if possible and if required, in order to adequately respond to an active demand scenario. IPT shall therefore allow a Bidirectional power flow, so that it can be properly defined as Bidirectional IPT (BIPT). In this paper, a 300 W BIPT system for E-bikes is proposed and experimental results are shown as well. Considering power level and s…
Control subsystem design for wireless power transfer
2014
Recently, the wireless power transfer has been increasingly employed. Particularly for the electric vehicles, the wireless solution is attractive for contactless battery charging, based on the Inductive Power Transfer (IPT). In this paper, a 150W prototype for IPT-based battery charging is presented and design criteria are reported. In addition to the power stage analysis, a proper control strategy is proposed. Simulation and experimental results are shown. The proposed control method aims at regulating the load current against variations in the magnetic coupling, so that the required amount of power can be supplied despite of unexpected decreases in the coupling efficiency.
Experimental test on a Contactless Power Transfer system
2014
Contactless Power Transfer (CPT) is an ever-growing technology in automotive market, due to the significant improvement brought by it to battery charging operation in terms of safety and comfort. CPT is based on inductive coupling between two coils, so that power cords can be avoided for vehicles battery charging and an important contribution towards a smarter mobility can arise. In this paper, a CPT prototype for E-bike is proposed. Magnetic design and power electronics system are described. Experimental results deriving from laboratory tests are presented and power efficiency of the system is addressed.
Near field improvements of stochastic collaborative beamforming in wireless sensor networks
2020
Wireless sensor networks (WSN) are groups of small devices that contain a microcontroller in which a large number of sensors can be added. They transmit data and communicate to each other in the ISM band, standard IEEE 802.15.4, exchanging packets using a multi-hop routing. These devices are named motes and are nodes of the WSN. They are very simple and easy to program, powered by batteries of 1.5Volts (AA and AAA). The nodes are autonomous elements that can be deployed implementing any type of network. In a typical deployment the nodes communicate with each other and with a master node or Base Station (BS), which in turn transmits the information to an external server, which collects the e…
A Comprehensive Survey on Cooperative Relaying and Jamming Strategies for Physical Layer Security
2019
Physical layer security (PLS) has been extensively explored as an alternative to conventional cryptographic schemes for securing wireless links. Many studies have shown that the cooperation between the legitimate nodes of a network can significantly enhance their secret communications performance, relative to the noncooperative case. Motivated by the importance of this class of PLS systems, this paper provides a comprehensive survey of the recent works on cooperative relaying and jamming techniques for securing wireless transmissions against eavesdropping nodes, which attempt to intercept the transmissions. First, it provides a in-depth overview of various secure relaying strategies and sch…