Search results for "Yield"
showing 10 items of 1338 documents
The influence of platform switching on the biomechanical aspects of the implant-abutment system. A three dimensional finite element study
2011
Objective: To evaluate the biomechanical scenario of platform switching geometric implant-abutment configuration relative to standard configurations by means of finite element analysis.Study Design: A 3D Finite Element Analysis (FEA) was performed on 3 different implant-abutment configurations: a 3.8 mm implant with a matching diameter abutment (Standard Control Design, SCD), a 5.5 mm implant with matching diameter abutment (Wider Control Design, WCD), and a 5.5mm implant with a 3.8 mm abutment (Experimental Design, ED). All the different experimental groups were discretized to over 60000 elements and 100000 nodes, and 130N vertical (axial) and 90N horizontal loads were applied on the coron…
Reversible pH-induced fluorescence colour change of gold nanoclusters based on pH-regulated surface interactions.
2019
To prepare water-dispersible, biocompatible, ratiometric pH nanosensors is challenging. We report here for the first time that the emission colour of NAD+-capped AuNCs responds to the mono-/bidentate anchoring of the phosphoric groups of the ligand. The AuNCs exhibit a high luminescence (21% quantum yield) and an outstanding performance as fluorescent ratiometric pH sensors over a broad pH range.
Reactions of Aminobis(phenolate)‐Supported Dioxidotungsten(VI) and Dioxidomolybdenum(VI) Complexes
2006
The dioxidotungsten(VI) and -molybdenum(VI) complexes [WO2(O2NOMe)] (1), [MoO2(O2NOMe)] (2) and [{MoO2(O2NMe)}2] (3) [O2NOMe methoxyethylamino-N,N-bis(2-methylene-4,6-dimethylphenolate) dianion, O2NMe = methylamino-N,N-bis(2-methylene-4,6-dimethylphenolate) dianion] can react with chloride sources (Me3SiCl, SOCl2) to form resultant monooxido dichloro compounds [WOCl2(O2NOMe)] (4), [MoOCl2(O2NOMe)] (5) and [MoOCl2(O2NMe)] (6), respectively. The reaction of tungsten complex yields of the mixture of cis-4 and trans-4, which can be separated and characterized. The reactions of analogous molybdenum complexes with Me3SiCl yield trans isomers of 5 and 6 as individual products. Reaction of dioxidot…
Homoleptic, heteroleptic and mixed-valent thallium and indium complexes of multidentate chalcogen-centred PCP-bridged ligands.
2011
The metathetical reaction of [Li(TMEDA)][HC(PPh(2)Se)(2)] ([Li(TMEDA)]1) with TlOEt in a 1:1 molar ratio afforded a homoleptic Tl(I) complex as an adduct with LiOEt, Tl[HC(PPh(2)Se)(2)]·LiOEt (7), which undergoes selenium-proton exchange upon mild heating (60 °C) to give the mixed-valent Tl(I)/Tl(III) complex {[Tl][Tl{(Se)C(PPh(2)Se)(2)}(2)]}(∞) (8). Treatment of TlOEt with [Li(TMEDA)](2)[(SPh(2)P)(2)CE'E'C(PPh(2)S)(2)] (3b, E' = S; 3c, E' = Se) in a 2:1 molar ratio produced the binuclear Tl(i)/Tl(i) complexes Tl(2)[(SPh(2)P)(2)CE'E'C(PPh(2)S)(2)] (9b, E' = S; 9c, E' = Se), respectively. Selenium-proton exchange also occurred upon addition of [Li(TMEDA)]1 to InCl(3) to yield the heterolepti…
Charged Bis-Cyclometalated Iridium(III) Complexes with Carbene-Based Ancillary Ligands
2013
Charged cydometalated (CN) iridium(III) complexes with carbene-based ancillary ligands are a promising family of deep-blue phosphorescent compounds. Their emission properties are controlled primarily by the main CN ligands, in contrast to the classical design of charged complexes where NN ancillary ligands with low-energy pi* orbitals, such as 2,2'-bipyridine, are generally used for this purpose. Herein we report two series of charged iridium complexes with various carbene-based ancillary ligands. In the first series the CAN ligand is 2-phenylpyridine, whereas in the second one it is 2-(2,4-difluorophenyl)-pyridine. One biscarbene (:CC:) and four different pyridine carbene (NC:) chelators a…
Remote Modification of Bidentate Phosphane Ligands Controlling the Photonic Properties in Their Complexes: Enhanced Performance of [Cu(RN‐xantphos)(N…
2020
A series of copper(I) complexes of the type [Cu(HN-xantphos)(N^N)][PF6] and [Cu(BnN-xantphos)(N^N)][PF6], in which N^N = bpy, Mebpy and Me2bpy, HN-xantphos = 4,6-bis(diphenylphosphanyl)-10H-phenoxazine and BnN-xantphos = 10-benzyl-4,6-bis(diphenylphosphanyl)-10H-phenoxazine is described. The single crystal structures of [Cu(HN-xantphos)(Mebpy)][PF6] and [Cu(BnN-xantphos)(Me2bpy)][PF6] confirm the presence of N^N and P^P chelating ligands with the copper(I) atoms in distorted coordination environments. Solution electrochemical and photophysical properties of the BnN-xantphos-containing compounds (for which the highest-occupied molecular orbital is located on the phenoxazine moiety) are repor…
Development of a non-chromatographic method for the speciation analysis of inorganic antimony in mushroom samples by hydride generation atomic fluore…
2009
Abstract A simple and sensitive method has been developed for the direct determination of toxic species of antimony in mushroom samples by hydride generation atomic fluorescence spectrometry (HG AFS). The determination of Sb(III) and Sb(V) was based on the efficiency of hydride generation employing NaBH 4 , with and without a previous KI reduction, using proportional equations corresponding to the two different measurement conditions. The extraction efficiency of total antimony and the stability of Sb(III) and Sb(V) in different extraction media (nitric, sulfuric, hydrochloric, acetic acid, methanol and ethanol) were evaluated. Results demonstrated that, based on the extraction yield and th…
Eu3+ ternary and tetrakis complexes with carbazole and methyl group substituted dibenzoylmethane derivatives: Induction of aggregation enhanced emiss…
2019
Abstract Two dibenzoylmethane (DBM) derivatives with methyl (Me-DBM) or carbazole (CBZ-DBM) substituents at the para-position of the phenyl ring and their four novel ternary and tetrakis Eu3+ complexes with 1,10-phenanthroline (PHEN) as a secondary ligand or tetraethylamonium ion (N+(Et)4) as the counter-cation were synthesized and characterized. The investigation of the optical properties of the complexes revealed that Me-DBM based compounds exhibit aggregation enhanced emission (AEE), while in the case of CBZ-DBM this effect is not observed. At the same time, the introduction of a carbazole substituent reduces the emission quantum yield of the complexes. The decrease in luminescence effic…
Diastereoselective synthesis of spongian diterpenes. Total synthesis of the furanoditerpene (−)-spongia-13(16),14-diene
1999
Abstract An effective diastereoselective synthesis of the marine-sponge metabolite (−)-spongia-13(16),14-diene 1 is achieved starting from S-(+)-carvone via a homochiral phenanthrenone as the key intermediate for the construction of the furan ring system. S-(+)-Carvone was transformed into the phenanthrenone 2a in six steps (53% overall yield), using an intramolecular Diels-Alder reaction as the key step. Conversion of the enone function in 2a into an epoxyaldehyde function followed by cyclisation and aromatisation in acid conditions completed the construction of ring D.
Synthesis of MoO3 Nanostructures and Their Facile Conversion to MoS2 Fullerenes and Nanotubes.
2007
The fast thermolysis of ammonium molybdate leads to a mixture of MoO3 and Mo5.3O14.5(OH)2.8(H2O)1.36 with spherical and rod-like morphologies. The oxide mixture can be converted in quantitative yield to inorganic fullerene-type (IF) MoS2 and MoS2 nanotubes (NT) by H2S reduction using a facile and quick procedure. The products were studied by X-Ray Diffraction (XRD) and by Transmission Electron Microscopy (TEM). TEM analysis reveals that the spherical and rod-like morphology of the oxide precursor is preserved during the H2S treatment.