Search results for "Young's modulus"
showing 10 items of 74 documents
Epoxy composites filled with high surface area-carbon fillers
2013
Citation: J. Appl. Phys. 114, 164304 (2013); doi: 10.1063/1.4826529 (Received 24 July 2013; accepted 6 October 2013; published online 22 October 2013) A comprehensive analysis of electrical, electromagnetic (EM), mechanical, and thermal properties of epoxy resin composites filled with 0.25–2.0 wt. % of carbon additives characterized by high surface area, both nano-sized, like carbon nanotubes (CNTs) and carbon black (CBH), and micro-sized exfoliated graphite (EG), was performed. We found that the physical properties of both CNTs- and CBH-based epoxy resin composites increased all together with filler content and even more clearly for CBH than for CNTs. In the case of EG-based composites, go…
Mechanical, thermal and electrical properties of monolayer and bilayer graded Al/SiC/rice husk ash (RHA) composite
2017
Abstract The mechanical, electrical and thermal properties as well as thermal expansion of Al/SiC/RHA (rice husk ash) monolayer and bilayer composite have been studied using the Taguchi method and analysis of variance (ANOVA). The parameter that most significantly affects the modulus of elasticity of Al/SiC/RHA bilayer composites is processing time, with contribution percentages of 68 and 27% calculated from stress-strain graphs and ultrasonic method, respectively. However, the factor which mostly affects bending strength, CTE value and electrical resistivity of composites is process temperature with contribution percentages of 32, 28, and 22%, respectively. The projected values for modulus…
Thermal and elastic properties of poly(vinyl chloride) (PVC) + chlorinated polyethylene (CPE) blends
2003
Eight types of PVC + CPE blends with different weight ratios (PVC/CPE = 100/0, 90/10, 80/20, 60/40, 40/60, 20/80, 10/90, and 0/100) are tested. Data on the heat conductivity, thermal diffusivity, and heat capacity of the blends investigated are reported. Primary attention is paid to the structural approach for effective elastic constants: bulk, shear, and Young's modulae. The blends are considered as random mixtures of two isotropic constituents. It is found that the elastic moduli may be well represented by the Kerner and Budiansky equations.
Young’s modulus and indirect morphological analysis of Bi2Se3nanoribbons by resonance measurements
2017
An electrostatically induced resonance behaviour of individual topological insulator Bi2Se3 nanoribbons grown by a catalyst free vapour-solid synthesis was studied in situ by scanning electron microscopy. It was demonstrated that the relation between the resonant frequencies of vibrations in orthogonal planes can be applied to distinguish the nanoribbons with rectangular cross-sections from the nanoribbons having step-like morphology (terraces). The average Young's modulus of the Bi2Se3 nanoribbons with rectangular cross-sections was found to be 44 ± 4 GPa.
Morphology and transport parameters of cold-rolled low-density polyethylene
1986
Abstract Sheets of low-density polyethylene were rolled at room temperature. Samples with two different degrees of rolling were obtained. The structural changes induced by the rolling treatments were investigated using scanning electron microscopy and by analyzing the transport properties. Results suggest that in the analyzed range of deformation, the rolling induces a domain structure as a consequence of a nonhomogeneous distribution of the deformation. At lower local deformation the initial morphology is still present, while at higher deformation clumps of folded chains oriented along the rolling directions are observable. The transport properties indicate that the rolling treatment reduc…
Physical behavior and morphology of biaxially rolled low-density polyethyleneX
1989
Abstract Biaxial rolling was carried out on low-density polyethylene, and the rolled samples were studied using various techniques. Scanning electron microscopy and analysis of transport properties were used to obtain structural information, which was correlated to thermomechanical and dynamic-mechanical behavior. Results indicate that the initial morphology is destroyed by rolling and that clumps of molecules, like fibrils, are generated parallel to the rolling plane. The molecular orientation in the plane is mainly radial, with some reinforcement, particularly at high rolling degree, along axes diagonal with respect to the rolling directions. The rolling drastically reduces the molecular …
The effect of introduction of montmorillonite clay (MMT) on the elastic properties of polycarbonate (PC) composition with acrylonitrile-butadiene sty…
2015
Abstract Polycarbonate (PC)/acrylonitrile–butadiene–styrene terpolymer (ABS)/montmorillonite (MMT) nanocomposites have been obtained by melt compounding in a twin-screw extruder. Structural and elastic properties have been characterized. The theoretical analysis of the elastic properties of PC/ABS/MMT composite with a widely varied number of elementary layers in clay filler particles has been performed in order to estimate the influence of the degree of exfoliation of particles on the effect of reinforcement of the material. Results of the theoretical analysis have been compared with the experimental data about the effects of unmodified and two types of organically modified montmorillonite …
Multifunctional properties of nanocomposites made by 1D and 2D graphene based fillers
2015
High aspect ratio graphene based fillers with different dimensionalities showed the ability to greatly modify rheological, mechanical, thermal and electrical properties of polymers at very low content. In this work, the effect of filler dimensionality on the multifunctional properties of an epoxy matrix reinforced by both carbon nanotubes (1D) and graphite nanoplatelets (2D) have been investigated across the percolation region. Keywords-- Carbon nanotube, Graphite nanoplatelet, nanocomposites, mechanical properties, ...
Elasticity and long-term behavior of recycled polyethylene terephthalate (rPET)/montmorillonite (MMT) composites
2014
Abstract Recycled polyethylene terephthalate (rPET) nanocomposites with various amounts of montmorillonite clay (MMT) have been manufactured by using twin screw extrusion. By rising MMT weight content Wf up to 1 wt.% it is possible to increase yield strength and ultimate strength of the composite by 17% and 27% respectively in comparison to neat rPET. Introduction of MMT in the rPET leads also to considerable increase of the modulus of elasticity E. Relationship E(Wf), however, is non-linear and is characterized by slow-down in E growth along with increasing MMT content. At low nanofiller content experimental results are sufficiently well described by using the method of Mori–Tanaka and the…