Search results for "activated sludge"
showing 10 items of 143 documents
UCT-MBR vs IFAS-UCT-MBR for Wastewater Treatment: A Comprehensive Comparison Including N2O Emission
2017
In this study the performance (in terms of carbon and nutrient removal) and N2O emission of two plant configurations adopting innovative technologies were investigated. With this regards, an University Cape Town (UCT) membrane bioreactor (MBR) plant and an Integrated Fixed Film Activated Sludge (IFAS) -UCT-MBR plant were monitored. Both plants treat real wastewater under two different values of the influent carbon nitrogen ratio (C/N = 5 mgCOD/mgN and C/N = 10 mgCOD/mgN). Results have shown the highest carbon and nutrients removal efficiencies for the IFAS-UCT-MBR configuration during both the two investigated C/N values. Furthermore, the lowest N2O emission occurred for the IFAS-UCT-MBR.
Comparison of inoculums in the removal of 2-butoxyethanol from air emissions by biotrickling filter: Performance and microbial monitoring
2014
2-butoxyethanol is one of the most used glycol ether in industrial activities and the treatment of air 2-butoxyethanol-emissions become necessary. Biotechnologies are potential treatment technologies due to their low operational costs. The use of two inoculums in the treatment of 2-butoxyethanol by biotrickling filters (BTFs) packed with polyurethane-foam was studied. A pure culture of Pseudomonas putida, previously adapted to 2-butoxyethanol, was used as inocula in a BTF operated in the University of Stuttgart. Fresh activated sludge from a municipal waste water treatment plant was used as inocula in a BTF operated in the University of Valencia. An empty bed residence time of 12.5 s and in…
Correlation of wood-based components and dewatering properties of waste activated sludge from pulp and paper industry.
2010
Large amounts of wet sludge are produced annually in municipal and industrial wastewater treatment. Already in pulp and paper industry, more than ten million tons of primary sludge, waste activated sludge, and de-inking sludge is generated. Waste activated sludge contains large quantities of bound water, which is difficult to dewater. Low water content would be a matter of high calorific value in incineration but it also has effects on the volume and the quality of the matter to be handled in sludge disposal. In this research waste activated sludges from different pulp and paper mills were chemically characterised and dewatered. Correlations of chemical composition and dewatering properties…
Fractionated precipitation of acid macropolyanions by dialysis, a simple method for the estimation of DNA in complex biological samples.
1976
Abstract After efficient extraction by para-aminosalicylate, (hopping, grinding and eventual sonication, the macropolyanions are transformed into their cetyltrimethylammonium salts. These have differing solubilities, strongly depending on ionic strength. The cationic detergent-macropolyanionic salts are solubilized by high salt concentration. Salt is then dialysed out, rendering the polyanions highly insoluble in a sequential fashion. The insolubilized components are determined quantitatively by monitoring turbidity, which in case of DNA is strictly proportionate to its concentration. This relation is not affected by other components. This makes DNA determination possible even in crude aque…
Design of nutrient removal activated sludge systems
2003
A mechanistic mathematical model for nutrient and organic matter removal was used to describe the behavior of a nitrification denitrification enhanced biological phosphorus removal (NDEBPR) system. This model was implemented in a user-friendly software DESASS (design and simulation of activated sludge systems). A 484-L pilot plant was operated to verify the model results. The pilot plant was operated for three years over three different sludge ages. The validity of the model was confirmed with data from the pilot plant. Also, the utility of DESASS as a valuable tool for designing NDEBPR systems was confirmed.
Performance of a hybrid activated sludge/biofilm process for wastewater treatment in a cold climate region: Influence of operating conditions
2013
a b s t r a c t The main aim of the study was to investigate a hybrid MBBR process, mostly in terms of organic matter removal and nitrification, when operating with different values of the mixed liquor sludge retention time (SRT), and highlighting the influence of temperature on the process. Based on experience in practice it was hypothesized that nitrification could be maintained at far lower SRT's than in conventional activated sludge systems and with high organic loading rates applied. A field gathering campaign has been carried out on a hybrid activated sludge/biofilm. The obtained results highlighted that the pilot plant was capable to remove the organic matter at loading rates up to 3…
DESASS: A software tool for designing, simulating and optimising WWTPs
2008
This paper presents a very useful software tool to design, simulate and optimise wastewater treatment plants. The program is called DESASS (DEsign and Simulation of Activated Sludge Systems) and has been developed by CALAGUA research group. The mathematical model implemented is the Biological Nutrient Removal Model No.1 (BNRM1) which allows simulating the most important physical, chemical and biological processes taking place in treatment plants. DESASS calculates the performance under steady or transient state of whole treatment schemes including primary settlers, volatile fatty acid generation systems by primary sludge fermentation, activated sludge systems for biological organic matter a…
Selective enrichment of heterotrophic nitrifiers
2019
Removal of nitrogen from wastewaters (WW) represents a global problem. The low nitrification rate during WW treatment is often caused by ecotoxicity. This problem is attributed mostly to the industrial WW. Our study was focused on the testing of industrial WW and activated sludge (AS) with the aim to reveal the abundance of nitrifiers and increase their biomass, thus, providing the additional step, i.e., bioaugmentation, within the technological process of WW treatment. Plating of AS on the selective solidified media designated for the 1st and 2nd nitrification stages, resulted in the shift in bacterial community structure with dominated Alcaligenaceae and Alcanivorax for the 1st stage, and…
Biological nutrient removal in membrane bioreactors: denitrification and phosphorus removal kinetics.
2007
The impact of including membranes for solid liquid separation on the kinetics of nitrogen and phosphorus removal was investigated. To achieve this, a membrane bioreactor (MBR) biological nutrient removal (BNR) activated sludge system was operated. From batch tests on mixed liquor drawn from the MBR BNR system, denitrification and phosphorus removal rates were delineated. Additionally the influence of the high total suspended solids concentrations present in the MBR BNR system and of the limitation of substrate concentrations on the kinetics was investigated. Moreover the ability of activated sludge in this kind of system to denitrify under anoxic conditions with simultaneous phosphate uptak…
Population dynamics using temporal series analysis in a industrial two-stage activated sludge pilot plant
1998
A time series analysis using an autocorrelation function (ACF) was used to assess the relative importance of density (DD) and non density-dependent - (NDD) factors on microfauna abundance of a two-stage activated sludge pilot plant treating industrial effluents. Although some previous work has detected a carrying capacity for the total microfauna abundance in both reactors, ACF showed a general pattern of non-density dependent abundance regulation. Stationarity due to density-dependent factors was observed for the two major species in the first reactor, the sessile Opercularia asymmetrica and the crawling Chilodonatella minuta. There was no evidence of bacterial competition and only weak ev…