Search results for "alkaline"
showing 10 items of 283 documents
Reaction Rate Modeling in Cryoconcentrated Solutions: Alkaline Phosphatase Catalyzed DNPP Hydrolysis
2000
The hydrolysis of disodium p-nitrophenyl phosphate catalyzed by alkaline phosphatase was chosen as a model to study the kinetics of changes in frozen food products. The initial reaction rate was determined in concentrated sucrose solutions down to -24 degrees C, and the enzymatic characteristics K(M) and V(max) were calculated. The experimental data were compared to the kinetics predicted by assuming that the reaction was viscosity dependent. Indeed, an analysis of the enzymatic reaction demonstrated that both the diffusion of the substrate and the flexibility of the enzyme segments were controlled by the high viscosity of the media. When the temperature was too low for the viscosity to be …
The mechanism of hydrolysis of beta-glycerophosphate by kidney alkaline phosphatase.
1975
1. To identify the functional groups that are involved in the conversion of β-glycerophosphate by alkaline phosphatase (EC 3.1.3.1) from pig kidney, the kinetics of alkaline phosphatase were investigated in the pH range 6.6-10.3 at substrate concentrations of 3 μM-30 mM. From the plots of log ṼH+ against pH and log ṼH+/KH+m against pH one functional group with pK = 7.0 and two functional groups with pK = 9.1 were identified. These groups are involved in substrate binding. Another group with pK = 8.8 was found, which in its unprotonated form catalyses substrate conversion. 2. GSH inhibits the alkaline phosphatase reversibly and non-competitively by attacking the bound Zn(II). 3. The influenc…
Halogenomercury Salts of Sterically Crowded Triazenides - Convenient Starting Materials for Redox-Transmetallation Reactions
2010
Diaryl-substituted triazenides Ar(Ar′)N3HgX [Ar/Ar′ = Dmp/Mph, X = Cl (2a), Br (3a), I (4a); Ar/Ar′ = Dmp/Tph, X = Cl (2b), I (4b) with Mph = 2-MesC6H4, Mes = 2,4,6-Me3C6H2, Tph = 2′,4′,6′-triisopropylbiphenyl-2-yl and Dmp = 2,6-Mes2C6H3] were synthesized by salt-metathesis reactions in ethyl ether from the readily available starting materials Ar(Ar′)N3Li and HgX2. These compounds may be used for redox-transmetallation reactions with rare-earth or alkaline earth metals. Thus, reaction of 4b or 2b with magnesium or ytterbium in tetrahydrofuran afforded the triazenides Dmp(Tph)N3MX(thf) (5b: M = Mg, X = I; 6b: M = Yb, X = Cl) in good yield. All new compounds were characterized by melting poin…
The Marine Sponge-Derived Inorganic Polymers, Biosilica and Polyphosphate, as Morphogenetically Active Matrices/Scaffolds for the Differentiation of …
2014
The two marine inorganic polymers, biosilica (BS), enzymatically synthesized from ortho-silicate, and polyphosphate (polyP), a likewise enzymatically synthesized polymer consisting of 10 to >100 phosphate residues linked by high-energy phosphoanhydride bonds, have previously been shown to display a morphogenetic effect on osteoblasts. In the present study, the effect of these polymers on the differential differentiation of human multipotent stromal cells (hMSC), mesenchymal stem cells, that had been encapsulated into beads of the biocompatible plant polymer alginate, was studied. The differentiation of the hMSCs in the alginate beads was directed either to the osteogenic cell lineage by …
The influence of bone allograft processing on osteoblast attachment and function
2004
In order to assess the influence of eight different sterilisation and disinfection methods for bone allografts on adhesion, proliferation, and differentiation of human bone marrow stromal cells (BMSC), cells were grown in culture and then plated onto pieces of human bone allografts. Following processing methods were tested: autoclavation (AUT), low-temperature-plasma sterilisation of demineralised allografts (D-LTP), ethylene oxide sterilisation (EtO), fresh frozen bone (FFB), 80 degrees C-thermodisinfection (80 degrees C), gamma-irradiation (Gamma), chemical solvent disinfection (CSD), and Barrycidal-disinfection (BAR). The seeding efficiency was determined after one hour to detect the num…
Effects of illumination on the dielectric response of barium-strontium niobate ceramics
2013
A study of the effects of white light on the low and infra-low frequency relaxation of polarization in the barium-strontium niobate (SBN) ceramics is reported. The light is found considerably decreasing the contribution of space charge at temperatures corresponding to the range of the relaxor phase (it is, around the Tm).
Ni-Fe alloy nanostructured electrodes for water splitting in alkaline electrolyser
2021
Abstract In this work, nickel-iron alloy nanostructured electrodes obtained by template electrosynthesis method are investigated for both hydrogen and oxygen evolution reactions. Electrodes consist of nanowire arrays with high surface area that are able to ensures a high electrolytic activity. To obtain different alloy compositions, the concentration of the elements in the deposition baths is appropriately tuned. Results show that the composition of nanowires does not change linearly with the composition of deposition bath but are richer in Fe. Nanostructured electrodes are tested as both cathodes and anodes in 30 wt% KOH aqueous solution, at room temperature to determine the best alloy com…
Review of the Hydrogen Evolution Reaction—A Basic Approach
2021
An increasing emphasis on energy storage has resulted in a surge of R&D efforts into producing catalyst materials for the hydrogen evolution reaction (HER) with emphasis on decreasing the usage of platinum group metals (PGMs). Alkaline water electrolysis holds promise for satisfying future energy storage demands, however the intrinsic potential of this technology is impeded by sluggish reaction kinetics. Here, we summarize the latest efforts within alkaline HER electrocatalyst design, where these efforts are divided between three catalyst design strategies inspired by the three prevailing theories describing the pH-dependence of the HER activity. Modifying the electronic structure of a …
Fabrication and characterization of nanostructured Ni–IrO2 electrodes for water electrolysis
2014
Abstract Nanostructured Ni–IrO2 electrodes were fabricated by electrodeposition in a two-step procedure: first arrays of nickel nanowires (NWs) were electrodeposited within pores of polycarbonate (PC) membranes, then iridium oxide nanoparticles were deposited on the Ni metal after membrane dissolution, for improving the catalytic activity. The aim was to compare performance of these electrodes with traditional ones consisting of Ni film. Different methods of deposition of the IrO2 electrocatalyst were investigated and the effect on electrodes stability and activity is discussed. Despite a low coverage of Ni NWs by the electrocatalyst, results indicate a faster kinetics of O2 evolution in 1 …
Promotion of osteogenic cell response using quasicovalent immobilized fibronectin on titanium surfaces: introduction of a novel biomimetic layer syst…
2012
Purpose Despite the undeniable potential of cell adhesion molecules such as fibronectin to support osteogenic cell responses and consecutive dental implant healing, the most beneficial mode of application onto titanium implant surfaces still requires investigation. Unspecific fibronectin adsorption on titanium dioxide (TiO2) surfaces can result in low-loading, high-desorption rates and protein–metal interactions with impaired biologic activity. The aim of the present study was to monitor the osteogenic cell responses (cell adhesion, proliferation, and differentiation) specifically to fibronectin biofunctionalized TiO2. Materials and Methods An innovative biomimetic streptavidin-biotin layer…