Search results for "aluminum"
showing 10 items of 239 documents
Effect of active heating and cooling on microstructure and mechanical properties of friction stir–welded dissimilar aluminium alloy and titanium butt…
2019
A butt joint configuration of AA6061–pure Ti was welded using friction stir welding (FSW) with an assisted cooling and heating conditions, aiming to attain a flawless joint. Cooling-assisted friction stir welding (CFSW) was carried out with a different cooling medium such as CO2, compressed air and water at controlled flow rate. However, heating-assisted friction stir welding (HFSW) was performed with heating source of GTAW torch just before FSW tool at different current density. Prepared specimens were subjected to optical microscopy (OM), scanning electron microscopy (SEM) and electrodischarge spectroscopy (EDS) for microstructural characterizations. The tensile strength and microhardness…
Linear friction welding of dissimilar AA6082 and AA2011 aluminum alloys: microstructural characterization and design guidelines
2015
This paper presents the results of an experimental and numerical campaign on Linear Friction Welding of dissimilar AA2011-T8 and AA6082-T6 aluminum alloys. Experimental tests were carried out with constant oscillation amplitude and process time. Varying oscillation frequency, interface pressure, specimen geometry and mutual position were used. Grain size measurements, HV tests and EDX analysis were considered to characterize the microstructure of the joints as a function of the input process parameters. A thermal numerical model was utilized to predict the temperature profiles in the joints during the process. The obtained results allowed the identification of four weld categories: sound jo…
Effect of position and force tool control in friction stir welding of dissimilar aluminum-steel lap joints for automotive applications
2020
Widespread use of aluminum alloys for the fabrication of car body parts is conditional to the use of appropriate welding methods, especially if dissimilar welding must be performed with automotive steel grades. Friction stir welding (FSW) is considered to be a reasonable solution to obtain sound aluminum-steel joints. In this context, this work studies the effects of tool position and force control in dissimilar friction stir welding of AA6061 aluminum alloy on DC05 low carbon steel in lap joint configuration, also assessing proper welding parameter settings. Naked eye and scanning electron microscopy (SEM) have been used to detect macroscopic and microscopic defects in joints, as well as t…
Uncovering Technological and Environmental Potentials of Aluminum Alloy Scraps Recycling Through Friction Stir Consolidation
2020
Conventional metal chips recycling processes are energy-intensive with low efficiency and permanent material losses during re-melting. Solid state recycling allows direct recycling of metal scraps into semi-finished products. It is expected that this process category would lower the environmental performance of metals recycling. Friction Stir Consolidation is a new solid-state technique taking advantage of friction heat generation and severe plastic deformation to consolidate chips into billets. In this research, the feasibility of Friction Stir Consolidation as aluminum chips recycling process is analyzed. Specifically, an experimental campaign has been carried out with varying main proces…
Aluminum to titanium laser welding-brazing in V-shaped grooveI
2017
International audience; Laser assisted joining of AA5754 aluminum alloy to T40 titanium with use of Al-Si filler wires was carried out. Continuous Yb:YAG laser beam was shaped into double spot tandem and defocalized to cover larger interaction zone in V shaped groove. Experimental design method was applied to study the influence of operational parameters on the tensile properties of the joints. Microstructure examination and fractography study were carried out to understand the relation between local phase content and fracture mode.Within defined window of operational parameters, statistically important factors that influenced the strength of T40 to AA5754 joints in V groove configuration w…
Aluminium sheet metal scrap recycling through friction consolidation
2019
Abstract In the last decades, several direct-recycling techniques have been developed and investigated in order to avoid material remelting, typical of the conventional aluminum alloys recycling processes. Moreover, the remelting step for aluminum recycling is affected by permanent material losses. Solid-state recycling processes have proven to be a suitable strategy to face such issues. Friction Consolidation is an innovative solid state-recycling technology developed for metal chips. During the process, a rotating die is plunged into a hollow chamber containing the material to be processed. The work of friction forces decaying into heat soften the material and, together with the stirring …
Metal homeostasis regulators suppress FRDA phenotypes in a drosophila model of the disease
2016
Friedreich's ataxia (FRDA), the most commonly inherited ataxia in populations of European origin, is a neurodegenerative disorder caused by a decrease in frataxin levels. One of the hallmarks of the disease is the accumulation of iron in several tissues including the brain, and frataxin has been proposed to play a key role in iron homeostasis. We found that the levels of zinc, copper, manganese and aluminum were also increased in a Drosophila model of FRDA, and that copper and zinc chelation improve their impaired motor performance. By means of a candidate genetic screen, we identified that genes implicated in iron, zinc and copper transport and metal detoxification can restore frataxin def…
Interactions of amino acids with aluminum octacarboxyphthalocyanine hydroxide. Experimental and DFT studies
2017
The influence of albumin and amino acids (l-serine, glycine, l-histidine, l-tryptophan, l-cysteine) on the properties of aluminum octacarboxyphthalocyanine hydroxide (Al(OH)PcOC) was investigated in a phosphate buffer (pH 8.0). Particular attention was paid to the spectroscopic properties and photostability of Al(OH)PcOC. The effect of albumin or amino acids on the photodegradation of Al(OH)PcOC was examined in water using red light: 685 nm and daylight irradiation. Analysis of kinetic curves indicated that interaction with those molecules increases the photostability of Al(OH)PcOC. The molecular structure of Al(OH)PcOC complexes (in vacuum and in water) with axially or equatorially coordin…
Modelling Aspects in Accumulative Roll Bonding process by Explicit Finite Element Analysis
2013
Accumulative Roll-Bonding (ARB) process is a severe plastic deformation (SPD) process, capable of developing grains below 1 μm in diameter and improving mechanical properties of the material. In this study, the authors compared two different FE-codes with respect of its applicability for numerical analysis of the ARB process. Modelling this process was achieved using the explicit code for Abaqus/CAE both in 2D and 3D. The proposed model was used to assess the impact of ARB cycles on the final material properties. The numerical results in 2D and 3D were compared and contrasted. The research work presented in this paper is focused on the simulation optimization based on CPU time minimization.…
Biological monitoring of welders exposed to aluminium
2005
To evaluate an adequate strategy for biological monitoring of aluminium (Al), a group of 62 Al welders (age in 1999: 23-51 years, median 35 years) was surveyed annually from 1999 to 2003 by determination of pre- and post-shift Al in urine and plasma. Biomonitoring was supplemented by personal air measurements of the total dust concentration. The welders' internal exposure was compared to the exposure of 60 non-exposed assembly workers (age in 1999: 21-51 years, median: 36 years) who were surveyed in 1999, 2001 and 2003. Having a nearly constant dust exposure, median concentrations of Al in urine (Al in plasma) of the welders decreased from 40.1 microg/g to 19.8 microg/g creatinine (8.7 to 4…