Search results for "beams"

First experimental results of a cryogenic stopping cell with short-lived, heavy uranium fragments produced at 1000 MeV/u

2013

A cryogenic stopping cell (CSC) has been commissioned with U-238 projectile fragments produced at 1000 MeV/u. The spatial isotopic separation in flight was performed with the FRS applying a monoenergetic degrader. For the first time, a stopping cell was operated with exotic nuclei at cryogenic temperatures (70 to 100K). A helium stopping gas density of up to 0.05mg/cm(3) was used, about two times higher than reached before for a stopping cell with RF ion repelling structures. An overall efficiency of up to 15%, a combined ion survival and extraction efficiency of about 50%, and extraction times of 24ms were achieved for heavy a-decaying uranium fragments. Mass spectrometry with a multiple-r…

First experiments with gasdynamic ion source in CW mode.

2016

A new type of ECR ion source—a gasdynamic ECR ion source—has been recently developed at the Institute of Applied Physics. The main advantages of such device are extremely high ion beam current with a current density up to 600–700 emA/cm2 in combination with low emittance, i.e., normalized RMS emittance below 0.1 π mm mrad. Previous investigations were carried out in pulsed operation with 37.5 or 75 GHz gyrotron radiation with power up to 100 kW at SMIS 37 experimental facility. The present work demonstrates the first experience of operating the gasdynamic ECR ion source in CW mode. A test bench of SMIS 24 facility has been developed at IAP RAS. 24 GHz radiation of CW gyrotron was used for p…

Production of zero energy radioactive beams through extraction across superfluid helium surface

2003

A radioactive Ra-223 source was immersed in superfluid helium at 1.2-1.7 K. Electric fields transported recoiled Rn-219 ions in the form of snowballs to the surface and further extracted them across the surface. The ions were focussed onto an aluminium foil and alpha particle spectra were taken with a surface barrier spectrometer. This enabled us to determine the efficiency for each process unambiguously. The pulsed second sound wave proved effective in enhancing the extraction of positive ions from the surface. Thus we offer a novel method for study of impurities in superfluid helium and propose this method for production of zero energy nuclear beams for use at radioactive ion beam facilit…

The CERN/ISOLDE Laser Ion Source

2017

Laser resonance photo-ionization an essential aspect of radioactive ion beam production for fundamental and applied physics research. The laser ion source of the ISOLDE facility, described here, is the most versatile of its type worldwide.

2016

Light shifts are an important source of noise and systematics in optically pumped magnetometers. We demonstrate that the long spin-coherence time in paraffin-coated cells leads to spatial averaging of the vector light shift over the entire cell volume. This renders the averaged vector light shift independent, under certain approximations, of the light-intensity distribution within the sensor cell. Importantly, the demonstrated averaging mechanism can be extended to other spatially varying phenomena in anti-relaxation-coated cells with long coherence times.

Magneto-Electro-Elastic Bimorph Analysis by the Boundary Element Method

2008

The influence of the magnetic configuration on the behavior of magneto-electro-elastic bimorph beams is analyzed by using a boundary element approach. The problem is formulated by using the generalized displacements and generalized tractions. The boundary integral equation formulation is obtained by extending the reciprocity theorem to magneto-electro-elastic problems; it is numerically implemented by using the boundary element method multidomain technique to address problems involving nonhomogeneous configurations. Results under different magnetic configurations are compared highlighting the characteristic features of magnetopiezoelectric behavior particularly focusing on the link between …

Analytical prediction of the shear connection capacity in composite steel–concrete trussed beams

2016

Steel–concrete trussed composite beams are a particular types of composite girders constituted by a steel truss embedded in a concrete core. The truss is typically composed by a steel plate or a precast concrete slab working as bottom chord while coupled rebars are generally used to form the upper chord. Moreover, a system of ribbed or smooth steel rebars welded to the plate and forming the diagonals of the truss, works as web reinforcement. In the present study, the attention is focused on the evaluation of the shear resistance of the connection between bottom steel plate (the bottom chord) and concrete core through the diagonal bars of the truss developing a mechanical model able to accou…

EXPERIMENTAL AND NUMERICAL EVALUATION OF THE MECHANICAL BEHAVIOUR OF GFRP SANDWICH PANELS

2007

This work deals with the analysis of the mechanical behaviour of a class of sandwich structures widely employed in marine constructions, constituted by fiber-glass laminate skins over PVC foam or polyester mat cores. In detail, a systematic experimental study and numerical simulations have shown that the theoretical prediction of the strength and the actual failure mechanism of these sandwich structures can be affected by significant errors, specially in the presence of prevalent shear loading. Moreover, because of the low shear stiffness and the elastic constants mismatch of the skins and core material, failure modes and strength are strongly influenced by eventual stresses orthogonal to t…

Simple Plastic Model for Shear Critical SFRC Beams

2010

A simple physical model, for prediction of ultimate shear strength of steel fiber reinforced concrete (SFRC) beams is developed on the basis of a plastic approach originally proposed for reinforced concrete (RC) beams without stirrups. It is founded on the hypothesis that cracks can be transformed into yield lines, and thus is know as Crack Sliding Model (CSM). First, the CSM is improved in order to take into account the shear strength increase for deep beams, due to the arch effect. Then, the effectiveness factors for fibrous concrete under biaxial stresses are evaluated, taking into account the post-cracking tensile strength of SFRC and its ability to control slippage along shear cracks. …

Improved noncontact optical sensor for detection of glucose concentration and indication of dehydration level.

2014

The ability to extract different bio-medical parameters from one single wristwatch device can be very applicable. The wearable device that is presented in this paper is based on two optical approaches. The first is the extraction and separation of remote vibration sources and the second is the rotation of linearly polarized light by certain materials exposed to magnetic fields. The technique is based on tracking of temporal changes of reflected secondary speckles produced in the wrist when being illuminated by a laser beam. Change in skin’s temporal vibration profile together with change in the magnetic medium that is generated by time varied glucose concentration caused these temporal chan…