Search results for "bisphenol a"
showing 10 items of 62 documents
Efficient removal of bisphenol A from wastewaters: Catalytic wet air oxidation with Pt catalysts supported on Ce and Ce–Ti mixed oxides
2019
Catalytic wet air oxidation (CWAO) of an aqueous solution of bisphenol A (BPA) was investigated at 160 ℃ and 2.0 MPa of air in a batch reactor. Activity of supported platinum catalysts (2.5 wt%), prepared by wet impregnation, was compared with pure cerium and cerium–titanium oxide catalysts. Supported platinum catalysts showed higher activities in the removal of BPA than pure CeO2, Ce0.8Ti0.2O2 and Ce0.2Ti0.8O2. The oxidation reaction was followed the pseudo-first order rate law and the highest BPA removal, 97% and 95%, was achieved with Pt/CeO2 and Pt/Ce0.8Ti0.2O2 catalysts respectively. The CWAO of BPA aqueous solution was not a surface area specific reaction but the more important factor…
Analytical strategies for organic food packaging contaminants
2016
In this review, we present current approaches in the analysis of food-packaging contaminants. Gas and liquid chromatography coupled to mass spectrometry detection have been widely used in the analysis of some relevant families of these compounds such as primary aromatic amines, bisphenol A, bisphenol A diglycidyl ether and related compounds, UV-ink photoinitiators, perfluorinated compounds, phthalates and non-intentionally added substances. Main applications for sample treatment and different types of food-contact material migration studies have been also discussed. Pressurized Liquid Extraction, Solid-Phase Microextraction, Focused Ultrasound Solid-Liquid Extraction and Quechers have been …
Determination of Phenolic Endocrine Disruptors in Cosmetics by High-Performance Liquid Chromatography Mass Spectrometry
2017
An analytical method for the simultaneous determination of bisphenol A, 4-t-octylphenol, 4-n-octylphenol, and 4-n-nonylphenol in cosmetic samples has been developed. These compounds have toxic effe...
Characterization of melt-polymerized polycarbonate: preparative fractionation, branching distribution and simulation
2001
Melt-polymerized bisphenol-A polycarbonate materials characterized by a low degree of branching were fractionated according to molecular weight by the continuous polymer fractionation (CPF) method. The distribution of two types of end-groups and in-chain salicylate moieties arising from thermal rearrangement reactions were assessed across the molecular weight distribution by analysis of the fractions. Experimentally determined branching densities of the fractions agreed well with a molecular simulation based on a random sampling polycondensation model. Both simulation and experiments showed that the branching density increases with molecular weight in the experimentally accessible range. (C…
Simultaneous determination of bisphenol A, octylphenol, and nonylphenol by pressurised liquid extraction and liquid chromatography–tandem mass spectr…
2011
Abstract A new analytical method, using pressurised liquid extraction (PLE) and liquid chromatography–tandem mass spectrometry (LC–MS/MS), was developed for the simultaneous determination of bisphenol A (BPA), octylphenol (OP) and nonylphenol (NP) in powdered infant formulas (IF) and powdered skimmed milk (PM). The analytes were extracted by PLE, using this optimised conditions: ethyl acetate as solvent, 70 °C of temperature, reversed-phase silica C18 as dispersing agent and three cycles of extraction. The extracts were then injected in LC–MS/MS using a Gemini C18 column and a mixture of 5% water and 95% methanol/acetonitrile, both with 0.1% ammonia, as a mobile phase. Recoveries at differe…
A CASCADE of effects of bisphenol A
2009
International audience
Biomonitoring of Phthalates, Bisphenols and Parabens in Children: Exposure, Predictors and Risk Assessment
2021
Exposure to emerging contaminants, such as phthalates, bisphenols and parabens in children has been associated with possible neurodevelopment and endocrine alterations. In the present study, the biomonitoring of biomarkers in children (5–12 years old) from the Valencia Region (Spain) have been implemented using urines from the BIOVAL program. More than 75% of the children studied (n = 562) were internally exposed (>
Study of the Curing Process of DGEBA Epoxy Resin Through Structural Investigation
2015
In this work, a multi-scale approach with different analytical methods is applied to study the curing process and the structural properties of a diglycidyl ether of bisphenol A (DGEBA) epoxy resin. This monomer, thermally cured using 4,4′-diaminodiphenilsulfone (DDS) as hardener, is analyzed after 10, 45, 90, and 120 min of reaction time at 180 °C to obtain information on samples with different cross-linking densities. Samples are also characterized after extraction in acetone in order to obtain structural information on the insoluble parts. For this purpose, differential scanning calorimetry (DSC), dynamic mechanical thermal analysis (DMTA), solid-state nuclear magnetic resonance (ss-NMR),…
Design and synthesis of biobased epoxy thermosets from biorenewable resources
2017
International audience; Biobased diepoxy synthons derived from isoeugenol, eugenol or resorcinol (DGE-isoEu, DGE-Eu and DGER, respectively) have been used as epoxy monomers in replacement of the diglycidyl ether of bisphenol A (DGEBA). Their curing with six different biobased anhydride hardeners leads to fully biobased epoxy thermosets. These materials exhibit interesting thermal and mechanical properties comparable to those obtained with conventional petrosourced DGEBA-based epoxy resins cured in similar conditions. In particular, a high Tg in the range of 90–130 °C and instantaneous moduli higher than 4.3 GPa have been recorded. These good performances are very encouraging, making these n…
An automatic flow-through system for exploration of the human bioaccessibility of endocrine disrupting compounds from microplastics
2021
This article reports on the first attempt towards investigating the leaching rates in the human gastrointestinal (GI) tract of plastic-borne contaminants that can be ingested accidentally using physiologically relevant body fluids. Oral bioaccessibility under fasted and fed states was determined in dynamic mode exploiting an automatic flow setup. The flow system is able to mimic the fast uptake of the released species from the polymeric matrix by absorption in the human digestive system by the in-line removal of the leached species. Complex GI extractants based on the Unified Bioaccessibility Method (UBM, fasted state) and Versantvoort test (fed-state) were brought through a microplastic-lo…