Search results for "bond"
showing 10 items of 3527 documents
An in vitro evaluation of two dentine adhesive systems to seal the pulp chamber using a glucose penetration model
2010
Objectives: To evaluate the sealing capability of Cavit TM G with or without Clearfil TM S3 Bond and Prime & Bond NT placed in the pulp chamber. Study Design: Forty single rooted premolars, extracted for orthodontic and periodontal reasons, with intact coronal surface and mature apices, were standardized to a length of 15 mm. The teeth were instrumented, filled with a gutta-percha master cone and divided into three groups to obturate the pulp chambers: Cavit TM G; Clearfil TM S3 Bond plus Cavit TM G and Prime & Bond® NT plus Cavit TM G. A glucose leakage model was used for evaluating the coronal microleakage. The Mann-Whitney test was used to evaluate the differences in the means of the glu…
Survival rates of a lithium disilicate-based core ceramic for three-unit esthetic fixed partial dentures: a 10-year prospective study.
2013
Purpose The aim of this prospective study was to evaluate the clinical efficacy and long-term survival rate of three-unit fixed partial dentures (FPDs) made from lithium disilicate-based core ceramic. Materials and methods Twenty-one three-unit FPDs were placed in 19 patients to replace single lost teeth in the esthetic area, following a study protocol that took clinical, esthetic, and radiologic aspects into consideration. Each case was reviewed at 1 week following placement, at 6 months, and then annually for 10 years. Statistical analysis was performed using Kaplan-Meier survival analysis. Results Out of the 19 patients, 14.3% presented reversible postoperative sensitivity. Recession was…
In vitro comparison of the retention capacity of new aesthetic brackets.
1999
Tensile bond strength and bond failure location were evaluated in vitro for two types of aesthetic brackets (non-silanated ceramic, polycarbonate) and one stainless steel bracket, using bovine teeth as the substrate and diacrylate resin as the adhesive. The results show that metallic bracket had the highest bond strength (13.21 N) followed by the new plastic bracket (12.01 N), which does not require the use of a primer. The non-silanated ceramic bracket produced the lowest bond strength (8.88 N). Bond failures occurred mainly between bracket and cement, although a small percentage occurred between the enamel-cement interface with the metal and plastic brackets and within the cement for the …
Biomechanical behavior of cavity configuration on micropush-out test: A finite-element-study
2009
Objective: The objective of this study was to simulate the micropush-out bond strength test from a biomechanical point of view. For this purpose, stress analysis using finite element (FE) method was performed. Study design: Three different occlusal cavity shapes were simulated in disc specimens (model A: 1.5 mm cervical, 2 mm occlusal diameter; model B: 1.5 mm cervical, 1.75 mm occlusal diameter; model C: 1.5 mm cervical, 1.5 mm occlusal diameter). Quarter sizes of 3D FE specimen models of 4.0×4.0×1.25 mm3 were constructed. In order to avoid quantitative differences in the stress value in the models, models were derived from a single mapping mesh pattern that generated 47.182 elements and 6…
Disinclusion of unerupted teeth by mean of self-ligating brackets: Effect of blood contamination on shear bond strength
2012
Objectives: The aim of this study was to assess the effect of blood contamination on the shear bond strength and failure site of three different orthodontic self-ligating brackets. Study Design: 240 bovine permanent mandibular incisors were randomly divided into 12 groups of 20 specimens each. Orthodontic self-ligating brackets were tested under four different enamel surface conditions: a) dry, b) blood contamination before priming, c) blood contamination after priming, d) blood contamination before and after priming. Brackets were bonded to the teeth and subsequently tested using a Instron universal testing machine. Shear bond strength values and adhesive failure rate were recorded. Statis…
Retentive strengths of cast gold crowns using glass ionomer, compomer, or resin cement
1998
The retention forces of a newly developed compomer cement (Dyract Cem), a glass ionomer cement (Ketac Cem Aplicap), and a resin cement (F21) were examined.Cemented cast gold crowns were removed along the path of insertion with a Zwick universal testing device. The impact of both a cured and a noncured additional bonding layer that were applied to the inner surface of the crowns was examined across the Dyract Cem group.The mean adhesive strength was measured at 2.36 +/- 0.69 N/mm2 in the Ketac Cem group, at 0.60 +/- 0.28 N/mm2 in the F21 group, and at 1.85 +/- 0.94 N/mm2 in the Dyract Cem group, respectively. The application of an additional bonding layer to the inner surface of the crowns d…
Synthesis, structure and in vitro anticancer activity of Pd(II) complexes of mono- and bis-pyrazolyl-s-triazine ligands
2020
Abstract The square planar complexes [Pd(MPT)Cl2] (1) and [Pd(BPT)Cl]ClO4 (2) were synthesized by the reaction of the 4,4′-(6-(3,5-dimethyl-1H-pyrazol-1-yl)-1,3,5-triazine-2,4-diyl)dimorpholine (MPT) and N-methyl-N-phenyl-4,6-di(1H-pyrazol-1-yl)-1,3,5-triazin-2-amine (BPT) ligands with PdCl2 (1:1) in acetone under thermal conditions, respectively. In complex 1, the Pd(II) ion is coordinated with the MPT ligand as a bidentate NN-chelate, augmented with two chloride ligands in cis positions. In complex 2, the Pd(II) ion is coordinated with the BPT ligand as a tridentate N-chelate in a pincer fashion, together with one chloride ligand. Hirshfeld analysis indicated that complex 1 is packed with…
Molecular and supramolecular structures of self-assembled Cu(II) and Co(II) complexes with 4,4’-[6-(3,5-dimethyl-1H-pyrazol-1-yl)-1,3,5-triazine-2,4-…
2020
Abstract The molecular and supramolecular structures of [Cu(PTM)Cl2]∗0.75MeOH (1), [Co(PTM)Cl2]; (2A) and [Co(PTM)Cl2(EtOH)]; (2B) complexes, where PTM is 4,4’-[6-(3,5-dimethyl-1H-pyrazol-1-yl)-1,3,5-triazine-2,4-diyl]dimorpholine, were presented. In complexes 1 and 2A, the Cu(II) and Co(II) are tetra-coordinated with a distorted tetrahedral coordination environment. In case of complex 2B, an additional ethanol molecule is found coordinated with Co(II) leading to a highly distorted penta-coordinated Co(II) complex. In all cases, the PTM ligand is acting as a bidentate NN-chelate. Hirshfeld surface analysis indicated the importance of H⋯H (49.0–55.1%), Cl⋯H (18.8–20.5%) and O⋯H (8.3–9.9%) co…
Synthesis and crystal structure of the low-spin iron(II) complex [Fe(bpz)3](ClO4)2·H2O (bpz=2,2′-bipyrazine)
2004
Abstract The crystal structure of the title compound [Fe(bpz) 3 ](ClO 4 ) 2 · H 2 O (bpz=2,2 ′ -bipyrazine) has been determined by a single crystal X-ray diffraction study at 293(2) K. The complex is monoclinic, P 2 1 / c , a =17.263(3), b =9.983(2), c =17.921(4) A, β =107.94(3)°, V =2938.3(10) A 3 , Z =4, R =0.073 and R w =0.118. The structure is made up of tris-chelated [Fe(bpz) 3 ] 2+ cations, uncoordinated perchlorate anions and crystallization water molecules. The iron atom exhibits a FeN 6 distorted octahedral geometry with average Fe–N bond length and N–Fe–N bidentate angle of 1.962(5) A and 81.6(2)°. The value of the Fe–N bond distance and that of the room temperature magnetic mome…
Synthesis crystal structure and magnetic properties of [Fe2(bpym)(C5O5)2(H2O)4]·2H2O and two polymorphs of [Fe2(bpym)(C4O4)2(H2O)6]·2H2O (bpym = 2,2′…
1998
Abstract Two dinuclear iron(II) complexes of formulae [Fe2(bpym)(C5O5)2(H2O)4]·2H2O (1) and [Fe2(bpym)(C4O4)2(H2O)6]·2H2O (2) (bpym = 2,2-bipyrimidine, C5O52 = dianion of croconic acid (4,5-dihydroxycylopent-4-ene-1,2,3-trione) and C4O42 = dianion of squaric acid (3,4-dihydroxycyclobut-3-ene-1,2-dione)) were prepared and their crystal structures (at 103 K) determined by X-ray diffraction methods. The structure of 1 consists of neutral centrosymmetric [Fe2(bpym)(C5O5)2(H2O)4] units and water molecules of crystallization which are linked by an extensive network of hydrogen bonds. The coordination geometry around each iron atom is that of a compressed octahedron with bpym nitrogen atoms and cr…