Search results for "boundary"
showing 10 items of 1626 documents
A boundary element model for structural health monitoring using piezoelectric transducers
2013
In this paper, for the first time, the boundary element method (BEM) is used for modelling smart structures instrumented with piezoelectric actuators and sensors. The host structure and its cracks are formulated with the 3D dual boundary element method (DBEM), and the modelling of the piezoelectric transducers implements a 3D semi-analytical finite element approach. The elastodynamic analysis of the structure is performed in the Laplace domain and the time history is obtained by inverse Laplace transform. The sensor signals obtained from BEM simulations show excellent agreement with those from finite element modelling simulations and experiments. This work provides an alternative methodolog…
Evaluating creep in metals by grain boundary extraction using directional wavelets and mathematical morphology
2001
Abstract It is economically important for manufacturers of high-temperature machines to be able to measure creep so that they can predict residual service life more accurately. This paper describes and refines an image analysis method for evaluating creep in laboratory test pieces. It is a preliminary study of how to extract relevant information for creep measurement by cavities counting. Sample preparation for quantification by image analysis is an important step determining the further development of the image analysis technique. Grain boundary extraction, which is directional information, is the major question to be overcome before measurement can be automated. The search for a crest-lin…
Assessment of methodologies and data used to calculate desalination costs
2017
Abstract In desalination, similarly with other industries, the cost of the final product is one of the most important criteria that define the commercial success of a specific technology. Therefore, when new projects are planned or new technologies are proposed, the analysis of the expected costs attracts a lot of attention and is compared to (perceived) costs of state-of-the-art desalination or costs of alternative fresh water supply options. This comparison only makes sense if the cost assessment methodologies are based on the same principles and use common assumptions. This paper assesses: (i) the methodologies used to calculate the water cost; (ii) the boundary conditions and (iii) the …
Thermo-mechanical post-buckling analysis of variable angle tow composite plate assemblies
2017
peer-reviewed The increasing use of composite materials for lightweight structural applications and the extended tailoring capabilities offered by variable stiffness laminates requires rapid and robust analysis tools that adequately describe the mechanical behaviour of such structures. In this work, a Rayleigh–Ritz solution for generally restrained multilayered stiffened variable angle tow plates in the post-buckling regime is presented. The plate model is based on first-order shear deformation theory and accounts for geometrical nonlinearity through von Kármán’s assumptions. General symmetric and unsymmetric stacking sequences are considered and Legendre orthogonal polynomials are employed…
Prediction of flow fields in a dual-impeller stirred vessel
1999
Numerical simulations were connected for the flow field in a baffled tank stirred by a dual Rushton impeller. For this geometry, LDV measurements show a characteristic dependence of the flow patterns upon the position of the impellers. Two advanced modeling approaches were tested. In the first, the vessel was divided info two concentric blocks, coupled by, a sliding grin technique, and simulations were conducted in time-dependent mode. In the second approach, the vessel was modeled as two partially over-lapping I regions, the inner one rotating with the impeller and rite outer one stationary simulations were run in steady-state mode for each of the two regions, while information was iterati…
Structural Health Monitoring of Cracked Beam by the Dual Reciprocity Boundary Element Method
2012
In this paper a 2D boundary element model is used to characterize the transient response of a piezoelectric based structural health monitoring system for cracked beam. The BE model is written for piezoelectric non-homogeneous problem employing generalized displacements. The dual reciprocity method is used to write the mass matrix in terms of boundary parameters only. The multidomain boundary element technique is implemented to model non-homogeneous and cracked configuration, unilateral interface conditions are also considered to prevent the physical inconsistence of the overlapping between interface nodes belonging to the crack surfaces. To assess the reliability and the effectiveness of th…
Experimental Investigation of the Outflow Process over a Triangular Labyrinth-Weir
2012
In this paper, the outflow process from a sharp-crested triangular labyrinth weir is studied. Applying dimensional analysis and the Π theorem, five dimensionless groups, describing the outflow process, are deduced. The measurements, carried out by using sharp-crested weirs placed in a flume, allowed to establish a dimensionless stage-discharge relation. According to this equation, the flow magnification is affected by either the length magnification ratio or head to one cycle width ratio. The proposed equation, which also satisfies two theoretical boundary conditions, was finally tested by using experimental measurements of different reservoir hydraulic models.
On the dynamic behavior of piezoelectric active repair by the boundary element method
2011
The dynamic behavior of piezoelectric active repair bonded on cracked structures is analyzed in this article. The boundary element code used to perform the simulations is implemented in the framework of piezoelectricity in order to model the coupling between the elastic and the electric fields, which represents the most important feature of piezoelectric media. The fracture mechanics problem, i.e. the crack, as well as the bonding layer between the host structure and the active patch is modeled by means of the multidomain technique provided with an interface spring model. More particularly, the spring interface model allows considering the bonding layer as a zero-thickness elastic ply char…
Assessment of seismic resistance of masonry structures including boundary conditions
2002
The paper is devoted to the investigation of seismic response of the masonry structure and describes experiences with modelling of boundary conditions during the test of large heavy model on 6DOF shaking table. The main aim of the research was how to increase dynamic resistance capacity of old masonry buildings including the medium and strong seismic effects. The results of theoretical and numerical analyses are compared including initial forecasting calculations made before any test started. The emphasis is given to the boundary conditions reached during the excitation of the large masonry model via shaking table. Strengthening and retrofitting procedures and their effects are discussed wh…
A shoreline boundary condition for a highly nonlinear Boussinesq model for breaking waves
2012
Abstract A physically based strategy was used to model swash zone hydrodynamics forced by breaking waves within a Boussinesq type of model. The position and the velocity of the shoreline were determined continuously in space by solving the physically-based equations of the shoreline motion; moreover, a fixed grid method, with a wet–dry interface, was adopted for integrating the Boussinesq model. The numerical stability of the model was improved by means of an extrapolation method. To validate the proposed methodology, the classical analytical solution for the shoreline motion of a monochromatic wave train over a plane beach was considered. The comparison between the analytical and numerical…