Search results for "boundary"

showing 10 items of 1626 documents

Drude-type conductivity of charged sphere colloidal crystals: Density and temperature dependence

2005

We report on extensive measurements in the low-frequency limit of the ac conductivity of colloidal fluids and crystals formed from charged colloidal spheres suspended in de-ionized water. Temperature was varied in a range of 5 degrees CTheta35 degrees C and the particle number density n between 0.2 and 25 microm(-3) for the larger, respectively, 2.75 and 210 microm(-3) for the smaller of two investigated species. At fixed Theta the conductivity increased linearly with increasing n without any significant change at the fluid-solid phase boundary. At fixed n it increased with increasing Theta and the increase was more pronounced for larger n. Lacking a rigorous electrohydrodynamic treatment f…

Phase boundaryColloidValence (chemistry)Particle numberCondensed matter physicsChemistryElectrical resistivity and conductivityGeneral Physics and AstronomyElectrohydrodynamicsPhysical and Theoretical ChemistryColloidal crystalConductivityThe Journal of Chemical Physics
researchProduct

Small angle neutron scattering studies of critical phenomena in a three-component microemulsion

2007

Critical density fluctuations of a ``water-in-oil`` microemulsion consisting of water, benzene, and BHDC (benzyldimethyl-n-hexadecyl ammonium chloride) were observed near the phase boundary by SANS. Observed profiles were well described by product of a form factor of spherical droplets and a structure factor, consisting of a term describing the inter-droplet correlations and also an Ornstein- Zernike component describing the droplet density fluctuations. Allowance was also made fro droplet polydispersity,though the width of the distribution turned out to be very small (1-2%). Observed temperature dependence of osmotic compressibility was fitted using the crossover function proposed by Belya…

Phase boundaryCrystallographyUpper critical solution temperatureChemistryCritical phenomenaThermodynamicsMicroemulsionSmall-angle scatteringStructure factorLower critical solution temperatureSmall-angle neutron scattering
researchProduct

Dielectric Properties of PbSc1/2Nb1/2O3-PbTiO3Ceramics

2004

Lead titanate solid solutions exhibits extreme values of some physical parameters. We have investigated a ferroelectric relaxor ceramics of PSN-PT composition near the morphotropic phase boundary. Results are discussed with account for the relaxor properties related to defects and disordering of the PSN-PT system.

Phase boundaryFerroelectric relaxorMaterials scienceCondensed matter physicsDielectricCondensed Matter PhysicsFerroelectricityTitanateElectronic Optical and Magnetic Materialschemistry.chemical_compoundchemistryvisual_artvisual_art.visual_art_mediumLead titanateCeramicSolid solutionFerroelectrics
researchProduct

Low and Infra-Low Frequency Measurements in Lead Titanate Solid Solutions

2006

The study of PSN-PT ferroelectric relaxor ceramics exhibiting extreme values of some physical parameters near the morphotropic phase boundary is reported. The results are discussed to account for the relaxor properties related to defects and disordering of the PSN-PT system.

Phase boundaryFerroelectric relaxorMaterials scienceMineralogyDielectricLow frequencyCondensed Matter PhysicsFerroelectricityAtomic and Molecular Physics and Opticschemistry.chemical_compoundchemistryvisual_artvisual_art.visual_art_mediumGeneral Materials ScienceCeramicLead titanateComposite materialSolid solutionSolid State Phenomena
researchProduct

Effects of structure ordering, structure defects and external conditions on properties of complex ferroelectric perovskites

1998

Abstract Structural rearrangements in lead-containing (A‘A’) (B’B“)O3 type perovskite compounds are caused by technological treatment, high-energy radiation and ambient conditions. Variation of structure ordering along with modification (substituted or defected solid solutions) may provide promising compositions for applications, e.g., cascade microcryogenic devices (PST solid solutions); efficient piezoelectric materials – here the new (1 – x)Pb(Lu1/2Nb1/2)O3 – xPbTiO3 system in the morphotropic region. The maximum values of the electromechanical coupling coefficients kp = 0·663, kt = 0·481, k 31 = 0·355 were attained in compositions PLuNT 59/41 (Tm = 353°C) near the morphotropic phase bou…

Phase boundaryHysteresisPiezoelectric coefficientMaterials scienceCondensed matter physicsThin filmCondensed Matter PhysicsPiezoelectricityFerroelectricityElectronic Optical and Magnetic MaterialsPerovskite (structure)Solid solutionFerroelectrics
researchProduct

Ceramics and Thin Films of Some New Pb(B 3+ ,Nb)TiO 3 -PbTiO 3 Systems

2003

The structure, dielectric, and electromechanical properties of (1 m x )Pb(B 3+ ,Nb)TiO 3 - x PbTiO 3 binary systems (B = Lu, Er, Tb, Ho) are reported. The crystallographic features at the morphotropic phase boundary (MPB) between tetragonal P4mm and pseudo-monoclinic M phases are discussed with respect to electro-mechanical properties. Doping effect (with La 3+ ) on the properties of ceramic samples of pseudobinary Pb(Lu 1/2 Nb 1/2 )O 3 -PbTiO 3 (PLuNT) system has been investigated. Pb(Mg 1/3 Nb 2/3 )-PbTiO 3 (PT) solid solutions were studied under different processing conditions for obtaining ceramics of 100% perovskite structure with sufficient high j T EC ∼ 1 K near room temperature. The…

Phase boundaryMaterials scienceAnalytical chemistryDielectricCondensed Matter PhysicsFerroelectricityElectronic Optical and Magnetic MaterialsPulsed laser depositionTetragonal crystal systemvisual_artvisual_art.visual_art_mediumCeramicThin filmSolid solutionFerroelectrics
researchProduct

Hydrogen Formation on Phase Boundaries of Sn/Al

2002

The present paper continues our earlier study of the embrittlement of Sn-Al eutectic alloy in water vapor and hydrogen emission from it, Atomically clean interfaces of solid phase joints of Sn with Al served as simple phase boundary models for this system. It was found by SIMS, X-ray and SEM techniques that the brittleness is caused by chemical adsorption of hydrogen on phase boundaries. This process is facilitated by structural defects. The reaction of hydrogen with phase boundary occurs first in regions of micro-and submicrocracks. The effect is irreversible one and it is associated with the formation of SnH4 that is instable and decomposes at the room temperature. The phase boundary of S…

Phase boundaryMaterials scienceHydrogenHydrogen formationMetallurgychemistry.chemical_elementThermodynamicsBrittlenesschemistryPhase (matter)Physics::Atomic PhysicsEmbrittlementWater vaporEutectic system
researchProduct

New high piezoelectric coupling PLuNT binary system ceramics

1999

Abstract The new (1 − x)Pb( Lu 1 2 Nb 1 2 ) O 3 − x PbTiO 3 binary system ceramics in the interval 0 0.49). The morphotropic region extends over the interval x = 0.38–0.49, the concentration ratio M:T ≅ 1 corresponds to x = 0.41. The maximum values of the electromechanical coupling coefficients k p = 0.663, k t = 0.481, k 31 = 0.355 of (1 − x)PLuN-xPT ceramics were attained in compositions PLuNT 59/41 (T m = 353 °C) near the morphotropic phase boundary (MPB). The PLuNT system, having large values of electromechanical coupling and the highest T m (> 350 °C) among binary Pb(B′,B″)O 3 -PT perovskites may be favorable for piezoelectric sensors and actuators, and may have an interest as promisin…

Phase boundaryMaterials sciencePiezoelectric sensorAnalytical chemistryCondensed Matter PhysicsConcentration ratiovisual_artvisual_art.visual_art_mediumGeneral Materials ScienceBinary systemCeramicThin filmPiezoelectric couplingSingle crystalNanostructured Materials
researchProduct

Near-coincidence lattice method for the determination of epitaxy strains during oxidation of metals

2000

Abstract A theoretical method is proposed to evaluate the strains due to epitaxy between a metal and its oxide. Based on Bollmann’s approach of two adjoining grains, it uses the quantitative texture analysis of the two materials separated by the phase boundary. Our study of the Zr/ZrO 2 and Mo/MoO 3 systems reveals strong correlations between the criterion of best fit proposed by Bollmann and the orientation distribution function obtained by a quantitative texture analysis. The results of this study are used in a thermo-mechano-chemical simulation of the oxidation process of zirconium, which leads to this observation: two different zirconia orientations induce two different oxidation kineti…

Phase boundaryMaterials sciencePolymers and PlasticsOxideAnalytical chemistrychemistry.chemical_element02 engineering and technologyEpitaxy01 natural sciences[SPI.MAT]Engineering Sciences [physics]/Materialschemistry.chemical_compound[SPI]Engineering Sciences [physics]Transition metal0103 physical sciencesCubic zirconiaTexture (crystalline)ComputingMilieux_MISCELLANEOUS010302 applied physicsZirconiumMetals and AlloysRefractory metals021001 nanoscience & nanotechnologyElectronic Optical and Magnetic MaterialsCrystallographychemistryCeramics and Composites0210 nano-technology
researchProduct

Phase behaviour of binary mixtures of colloidal charged spheres

2008

Abstract As a step towards the modelling of binary metal alloys we here report on the shape of the phase boundary of two deionized charged sphere colloidal suspensions as a function of mixing ratio and particle density. Their size ratios are r = 0.68 and r = 0.56. Both aqueous suspensions of polystyrene copolymer spheres crystallize in a body-centred cubic structure. Interesting differences in the shape of the phase boundary are observed. In the first case a peaked increase of crystal stability was observed for a mixing ratio of p = 0.2–0.3, which gives the fraction of small spheres. Also in the second case the stability of the crystalline phase is larger than expected for an ideal solid so…

Phase boundaryMaterials scienceThermodynamicsColloidal crystallaw.inventionColloidCrystallographyColloid and Surface ChemistrylawPhase (matter)CrystallizationPhase diagramSolid solutionEutectic systemColloids and Surfaces A: Physicochemical and Engineering Aspects
researchProduct