Search results for "breakdown"
showing 10 items of 97 documents
Double pulse laser induced breakdown spectroscopy applied to natural and artificial materials from cultural heritages
2009
Abstract The laser-induced breakdown spectroscopy (LIBS) is an applied physical technique that has shown in recent years its great potential for rapid qualitative analysis of materials. Thanks to the possibility to implement a portable instrument that perform LIBS analysis, this technique is revealed to be particularly useful for in situ analysis in the field of cultural heritages. The purpose of this work is to evaluate the potentiality of LIBS technique in the field of cultural heritages, with respect to the chemical characterization of complex matrix as calcareous and refractory materials for further quantitative analyses on cultural heritages. X-Ray Fluorescence (XRF) analyses were used…
Laser-induced plasma spectroscopy to as low as 130 nm when a gas-purged spectrograph and ICCD detection are used.
2003
An experimental setup is described for measuring laser-induced plasma emission spectra in the near vacuum UV with a Czerny-Turner spectrograph and intensified charge-coupled device under atmospheric pressure. With a simple gas-purge technique, emission lines down to 130 nm could be recorded. The strongest emission lines of bromine, chlorine, and iodine in the near vacuum UV are easily detected.
Reduction of thermal damage in ultrathin gate oxides after intrinsic dielectric breakdown
2001
We have compared the thermal damage in ultrathin gate SiO2 layers of 5.6 and 3 nm thickness after intrinsic dielectric breakdown due to constant voltage Fowler-Nordheim stress. The power dissipated through the metal-oxide-semiconductor capacitor during the breakdown transient, measured with high time resolution, strongly decreases with oxide thickness. This is reflected in a noticeable reduction of the thermal damage found in the structure after breakdown. The effect can be explained as the consequence of the lower amount of defects present in the oxide at the breakdown instant and of the occurrence of a softer breakdown in the initial spot. The present data allow us to estimate the power t…
SOIL IONIZATION DUE TO HIGH PULSE TRANSIENT CURRENTS LEAKED BY EARTH ELECTRODES
2009
This paper proposes a numerical model of the soil ionization phenomena that can occur when earth electrodes are injected by high pulse transient currents, as the one associated with a direct lightning stroke. Based on finite difference time domain numerical scheme, this model ascribes the electrical breakdown in the soil to the process of discharge in the air. In fact, as soon as the local electric field overcomes the electrical strength, the air in the voids trapped among soil particles is ionized, and the current is conducted by ionized plasma paths locally grown. The dimension of these ionized air channels is strictly dependent upon the local temperature. Thus, a local heat balance is en…
Detection of deuterium retention by LIBS at different background pressures
2017
ITER plans foresee the quantitative diagnostics of fuel retention in reactor walls at near-atmospheric pressures. Using laser induced breakdown spectroscopy (LIBS) for this purpose assumes a reliable resolving of Balmer α-lines of hydrogen isotopes in spectra of plasma produced by focused laser radiation onto the target surface. To develop LIBS for quantitative diagnostics of fuel retention during the maintenance breaks of ITER, the effect of background gas pressure on the laser-induced plasma characteristics has been studied. The background pressure limits the expansion rate of plasma and as a result it leads to higher plasma concentrations. At the same time the limiting factor of the reso…
Integrated analytical methodologies for the study of corrosion processes in archaeological bronzes
2011
Abstract The investigations on structure and micro-chemical composition of archaeological metal alloys are needed in archaeometry. The aim of this study is devoted both to acquire information about their provenance and production technology, and to improve our understanding about the corrosion processes. In this paper we present the study of the corrosion phenomena of bronze samples, laboratory-made according to binary, ternary and quaternary alloys typical of Roman archaeometallurgical production through an integrated methodology based on the use of non or micro invasive physical techniques. Among the analysed samples, two were artificially aged through burial in the archaeological site of…
Optimization of spodumene identification by statistical approach for laser-induced breakdown spectroscopy data of lithium pegmatite ores
2021
Mapping with laser-induced breakdown spectroscopy (LIBS) can offer more than just the spatial distribution of elements: the rich spectral information also enables mineral recognition. In the present study, statistical approaches were used for the recognition of the spodumene from lithium pegmatite ores. A broad spectral range (280–820 nm) with multiple lines was first used to establish the methods based on vertex component analysis (VCA) and K-means and DBSCAN clusterings. However, with a view to potential on-site applications, the dimensions of the datasets must be reduced in order to accomplish fast analysis. Therefore, the capability of the methods in mineral identification was tested wi…
Electric breakdown of dielectric thin films for high-voltage display applications
2016
Smectic A liquid crystal is one of the most promising material for smart glass application due to infinite bistability and low haze at clear state. Voltage is needed to switch from scattering to transparent and it is likely for dielectric breakdown to occur. In order to reduce the probability of dielectric breakdown to occur, a dielectric insulating coating is usually employed. In this work we have compared electrical and optical properties of SiO2 thin films with thickness up to 500 nm coated by flexographic printing and reactive magnetron sputtering. IV characteristics and dielectric breakdown values show sputtered coatings to have higher dielectric strength. For sputtered coatings with t…
A novel flexible approach for prediction and on line diagnostic of partial discharge
2004
Partial discharges (PD), due to unavoidable local defects produced by the industrial manufacturing process, can determine local erosion of the material that may cause the electrical breakdown of the component in which the dielectric material represents the fundamental part. Recently, improved diagnostics of electrical insulation systems by means of electric PD measurements through a stochastic processing of the acquired data have been carried out. In this way, the identification of the defects as well, as the separation of multiple defects simultaneously active, have been performed. In this paper, a novel flexible approach for the on-line characterization of the defects in a dielectric mate…
Characterization of soft breakdown in thin oxide NMOSFETs based on the analysis of the substrate current
2001
We have investigated the properties of soft breakdown (SBO) in thin oxide (4.5 nm) nMOSFETs with measurements of the gate and substrate leakage currents using the carrier separation technique. We have observed that, at lower gate voltages, the level of the substrate current exhibits a plateau. We propose that the observed plateau is due to the Shockley-Hall-Read (SHR) generation of hole-electron pairs in the space charge region and at the Si-SiO/sub 2/ interface. At higher voltages, the substrate current steeply increases with voltage, due to a tunneling mechanism, trap-assisted or due to a localized effective thinning of the oxide, from the substrate valence band to the gate conduction ban…