Search results for "building"
showing 10 items of 1985 documents
Livsløpsvurdering og dimensjonering av stålog limtrebue i en nettverksbuebru
2016
Masteroppgave bygg - Universitetet i Agder 2016 This master thesis focuses on the design and life cycle assessment (LCA) of a network arch bridge. The arch is designed and compared by using two different materials, steel and gluelam. This study is carried out on the behalf of Statens vegvesen, Region øst, and serves as the graduate thesis for master degree in Civil Engineering at the University of Agder. The network arch bridge is part of E16 and is located at Oppstadåa. The bridge carries four lanes, which results in a 21 meters wide deck. The span of the bridge is 120 meters. Three different network arch bridges alternatives have been designed in this thesis. The original network arch bri…
Bitumen stabilized ballast: a potential solution for railway track-bed
2016
Railway ballast degradation under dynamic loads progressively leads to loss of mechanical performance and geometry of the track, so that maintenance interventions are frequently needed. In order to system- atically avoid this issue, recently solutions have been proposed to reinforce track-bed by using polyur- ethane and/or resins as well as asphalt layers among others. Nonetheless, their main limitations are related to the high initial cost and low productivity. To cope with these limitations, in this study, bitumen stabilized ballast (BSB) is proposed as a new solu- tion for ballast stabilization. This method aims at improving durability and reducing settlement by mod- ifying both stiffnes…
Optimización de las propiedades de emulsión de betún para la estabilización de balasto
2017
Ballasted track, while providing economical and practical advantages, is associated with high costs and material consumption due to frequent maintenance. More sustainable alternatives to conventional ballasted trackbeds should therefore aim at extending its durability, particularly considering ongoing increases in traffic speed and loads. In this regard, the authors have investigated a solution consisting of bitumen stabilised ballast (BSB), designed to be used for new trackbeds as well as in reinforcing existing ones. This study presents the idea behind the technology and then focuses on a specific part of its development: the optimisation of bitumen emulsion properties and dosage in relat…
Novel performance-based technique for predicting maintenance strategy of bitumen stabilised ballast
2018
Abstract Despite being the most used worldwide, railway ballasted tracks presents high maintenance cost related to ballast settlement and particle degradation. With the aim of reducing life cycle costs, bitumen stabilised ballast (BSB) has been recently proposed as a relatively cheap alternative maintenance solution to be applied to existing tracks. This study aims at assessing the potential advantages of this technology, defining a novel maintenance strategy of traditional ballasted track-beds. A protocol for the application of the BSB technology and its associated maintenance strategy is defined. To estimate minor and major maintenance operations of BSB scenario in comparison to tradition…
Use of bitumen-stabilised ballast for improving railway trackbed conventional maintenance
2018
Despite its many advantages, ballasted track needs frequent maintenance to ensure an adequate quality of service. However, tamping, traditionally used to correct geometry, causes ballast degradation and loosening of the already compacted ballast layer, which quickly returns the track to its pre-maintenance position. Then, other maintenance techniques such as stoneblowing, as well as diverse solutions that reinforce trackbed, have been developed to reduce ballast settlement and particles degradation. Given the need to further advance research in this field, bitumen-stabilised ballast (BSB) has started to be investigated by the authors as a feasible solution thanks to its easy and quick appl…
Static Performances of Timber- and Bamboo-Concrete Composite Beams: A Critical Review of Experimental Results
2021
The use of composite beams made with traditional concrete and bio-based materials (such as timber and bamboo) is a valuable solution to reduce the environmental impact of the building sector. Timber-Concrete Composite (TCC) beams have been used for decades in structural applications such as new buildings, refurbishment of old timber structures, and bridges. Recently, different researchers suggested composite beams based on engineered bamboo, commonly named Bamboo-Concrete Composite (BCC) beams. This study presents a systematic comparison of structural performances and connection behavior of TCC and BCC beams under short-term static load. TCCs beams are compared to BCC ones using similar she…
Improving accuracy of FIR filters for computing convolution transforms for smooth non-bandlimited signals
2019
We propose to improve the accuracy of FIR filters for computing convolution transforms for smooth non-bandlimited (NBL) signals by designing filters by the identification method with using a pair of bandlimited portions of the chosen NBL input and output signals related with each other by the given transform. A design example of type IV linear phase differentiator is presented, where filter coefficients are calculated from the bandlimited portions of the Cauchy pulse and its derivative. The performance of the designed differentiator is evaluated by comparing the accuracy of computed derivatives for several smooth NBL test signals, such as the Cauchy pulse, the Hilbert transform of Cauchy pu…
Some aspects regarding the static behavior of basalt in the machine building industry
2017
Basalt is a material available in big quantities in nature. It has a low price and can be used in various domains. It can be relatively easily extracted from natural deposits and processed by means of melting. Melted and recrystallized basalt has demonstrated promising behavior with regards of its use in manufacturing, as reported in the literature. This work aims to present some aspects regarding the opportunity of using basalt in manufacturing the subassemblies of machine-tools. The research was made using grey cast iron and steel parts as reference for a comparative study. The researches presented in this work were focused on analyzing the behavior of basalt parts submitted to static str…
Some aspects regarding the thermic behaviour of a basalt parts in machine building industry
2019
This work aims to present some aspects regarding the opportunity of using basalt in manufacturing the subassemblies of machine tools. Melted and recrystallized basalt has demonstrated promising behavior with regards of its use in manufacturing, as reported in the literature. The researches presented in this work were focused on analyzing the behavior of basalt parts for machine tools submitted to thermic stress. The tests were made using grey cast iron and steel parts as reference for a comparative study. Testing methodology, specific measuring apparatus used, experimental test data records, data processing and resulting conclusions regarding the possibility of using basalt in machine tools…
Asphalt mixtures modified with basalt fibres for surface courses
2018
Abstract This paper shows the results of an experimental study concerning the effect of introduction of basalt fibres in asphalt mixtures for surface course, mainly with regard to those to be used in urban areas, for dedicated bus lanes. Surface layers, where tire-pavement interactions occur, have to provide different properties such as high friction (very important for users’ safety), stability, resistance to meteorological agents, and contribution to the overall pavement performances. Considering that basalt fibres provide considerable physical and mechanical properties and above all high abrasion resistance, scope of the study is to evaluate the effects of these fibres on mixtures proper…