Search results for "calor"
showing 10 items of 866 documents
Drift Time Measurement in the ATLAS Liquid Argon Electromagnetic Calorimeter using Cosmic Muons
2010
The ionization signals in the liquid argon of the ATLAS electromagnetic calorimeter are studied in detail using cosmic muons. In particular, the drift time of the ionization electrons is measured and used to assess the intrinsic uniformity of the calorimeter gaps and estimate its impact on the constant term of the energy resolution. The drift times of electrons in the cells of the second layer of the calorimeter are uniform at the level of 1.3% in the barrel and 2.8% in the endcaps. This leads to an estimated contribution to the constant term of (0.29-0.04+0.05)% in the barrel and (0.54-0.04+0.06)% in the endcaps. The same data are used to measure the drift velocity of ionization electrons …
New binary solid dispersion of indomethacin with surfactant polymer: From physical characterization to in vitro dissolution enhancement
2009
This article investigated preparation of solid dispersions containing a poor water-soluble drug, indomethacin (IND), and a new surfactant polymer, polyoxyethylene 32 distearate (POED). Solid dispersions were prepared by the melting method and characterized by DSC, hot-stage microscopy (HSM), X-ray diffraction (XRD) and scanning electron microscopy (SEM). DSC and HSM analyses performed on IND/POED physical mixtures indicated that IND could dissolve in liquid POED. The materials showed complete miscibility at liquid state. Combination of DSC, XRD, and SEM revealed that these materials had limited miscibility at the solid state. Up to 20% w/w IND in POED, we did not detect significant modifica…
Influence of drug polarity upon the solid-state structure and release properties of self-emulsifying drug delivery systems in relation with water aff…
2009
To overcome low oral bioavailability of poorly water-soluble drugs, self-emulsifying drug delivery systems (SEDDS) have been noted as a promising strategy. However, incorporation of drugs into SEDDS composed of Gelucire44/14 could induce interactions not yet well understood. The aim of this study was to investigate the influence of drug polarity upon the solid-state structure of SEDDS formulation, particularly in terms of wettability, thermal behaviour and microscopic aspects and their effect upon the release properties of the SEDDS. Model drugs were naproxen and sodium naproxen (10% w/w), two drugs with similar chemical structure but different water solubilities. Both drugs had an effect o…
Efficientamento energetico di utenze domestiche nelle isole minori italiane
2020
L’articolo tratta l’efficientamento energetico nel settore residenziale delle piccole isole non connesse alla rete di trasmissione elettrica nazionale. L’analisi ha riguardato un’utenza tipo dell’Isola di Lampedusa, individuata sulla base dei dati statistici ISTAT, di cui sono stati acquisiti i dati di consumo da bolletta e monitorati i consumi elettrici al fine di selezionare gli interventi di retrofit più adeguati. Fra questi vi sono: la sostituzione degli scalda-acqua elettrici esistenti e il ricorso a tecnologie di Building Automation Control system (BACs) per la gestione dell’impianto di illuminazione e di altri carichi elettrici flessibili. La valutazione dei risparmi conseguibili è s…
Uncovering the metastable γ-Ag2WO4 phase: a joint experimental and theoretical study
2017
The synthesis of metastable solid phases is a pivotal starting point for innovative materials research. Here, we report the synthesis by means of a precipitation method of the metastable cubic γ-Ag2WO4 phase under ambient conditions. Different experimental techniques such as X-ray diffraction (XRD) with Rietveld refinement, field emission scanning electron microscopy (FE-SEM), micro-Raman/ultraviolet-visible (UV-vis) diffuse reflectance, photoluminescence spectroscopies, and differential scanning calorimetry (DSC) were employed. To complement the experimental data, the geometry, morphology, vibrational and electronic structure of γ-Ag2WO4 were characterized and evaluated using first-princip…
Mechanical construction and installation of the ATLAS tile calorimeter
2013
This paper summarises the mechanical construction andinstallation of the Tile Calorimeter for the ATLASexperiment at the Large Hadron Collider in CERN, Switzerland. The TileCalorimeter is a sampling calorimeter using scintillator as the sensitivedetector and steel as the absorber and covers the central region of the ATLASexperiment up to pseudorapidities ±1.7. The mechanical construction ofthe Tile Calorimeter occurred over a periodof about 10 years beginning in 1995 with the completionof the Technical Design Report and ending in 2006 with the installationof the final module in the ATLAS cavern. Duringthis period approximately 2600 metric tons of steel were transformedinto a laminated struc…
Latest Frontier Technology and Design of the ATLAS Calorimeter Trigger Board Dedicated to Jet Identification for the LHC Run 3
2016
To cope with the enhanced luminosity of the beam delivered by the Large Hadron Collider (LHC) in 2020, the “A Toroidal LHC ApparatuS” (ATLAS) experiment has planned a major upgrade. As part of this, the trigger at Level1 based on calorimeter data will be upgraded to exploit fine-granularity readout using a new system of Feature Extractors, which each use different physics objects for the trigger selection. The article focusses on the jet Feature EXtractor (jFEX) prototype, one of the three types of Feature Extractors. Up to 2 TB/s have to be processed to provide jet identification (including large area jets) and measurements of global variables within few hundred nanoseconds latency budget.…
Commissioning Experience with the ATLAS Level-1 Calorimeter Trigger System
2007
The ATLAS Level-1 Calorimeter Trigger is one of the main elements of the first stage of event selection for the ATLAS experiment at the LHC. The input stage consists of a mixed analogue/digital component taking trigger sums from the ATLAS calorimeters. The trigger logic is performed in a digital, pipelined system with several stages of processing, largely based on FPGAs, which perform programmable algorithms in parallel with a fixed latency to process about 300 Gbyte/s of input data. The real-time output consists of counts of different types of physics objects and energy sums. The production of final modules started in 2006, and installation of these modules and the necessary infrastructure…
The sROD demonstrator for the ATLAS Tile Calorimeter Upgrade
2012
This work presents the early design of the super Read-Out Driver (sROD) demonstrator board for the Tile Calorimeter Demonstrator project. This project aims to test the new readout electronics architecture for the Phase 2 Upgrade of the ATLAS Tile Calorimeter, replacing the front-end electronics of one complete drawer with the new electronics during the Long Shutdown 2013, in order to evaluate its performance. The sROD demonstrator board will receive and process data from 48 channels. Moreover the sROD demonstrator board will send preprocessed data to the present trigger system, and will transmit trigger control and timing information (TTC) and Detector Control System (DCS) commands to the f…
Design and testing of the high speed signal densely populated ATLAS calorimeter trigger board dedicate to jet identification
2017
Abstract—The ATLAS experiment has planned a major upgrade in view of the enhanced luminosity of the beam delivered by the Large Hadron Collider (LHC) in 2021. As part of this, the trigger at Level-1 based on calorimeter data will be upgraded to exploit fine-granularity readout using a new system of Feature Extractors (three in total), which each uses different physics objects for the trigger selection. The contribution focusses on the jet Feature EXtractor (jFEX) prototype. Up to a data volume of 2 TB/s has to be processed to provide jet identification (including large area jets) and measurements of global variables within few hundred nanoseconds latency budget. Such requirements translate …