Search results for "carbon"

Activated Carbon Production from Peat Using ZnCl2 : Characterization and Applications

2017

The process for producing activated carbon from peat was optimized. The peat was impregnated with different ratios of ZnCl2, and the impregnated biomass was activated at different temperatures. The specific surface area, pore size distribution, total carbon content, and yield of the activated carbon were investigated. The best results for the specific surface area and mesoporosity of the activated peat were obtained by using a high impregnation ratio (2) and high activation temperature (1073 K). Highly porous activated carbon was produced that had a specific surface area of approximately 1000 m2/g and total pore volume that was higher than 0.5 cm3/g for most samples. The activated carbon ha…

Production of a 15C radioactive ion beam based on 18O(n, α)

2019

In the context of the SPIRAL2 radioactive beam facility the production rate of the neutron-rich 15C nucleus by 18O(n,α) has been investigated. In a water target of 20 cm3, enriched in 18O and placed behind the neutron converter, a rate of a few 1010 nuclei per second can be reached with 1mA of 40MeV deuterons. A 18O(n,α) cross-section based on the activation method is proposed. It is intermediate between the highest and lowest evaluations available to date. peerReviewed

Applicability of hybrid aspen (Populus tremula L. × P. tremuloides Michx.) bark extract as a precursor of rigid carbon foam and activated carbon

2023

Hybrid aspens have long attracted scientific interest, but the research on their use as feedstocks for chemical applications are still very limited. The bark biomass of the poplar species contains many valuable extractives that can be utilized as value-added products. This paper examines the applicability of hybrid aspen (Populus tremula L. × P. tremuloides Michx.) bark extract as a precursor of rigid carbon foam and activated carbon. To explore this, the study considers 1) the basic chemical composition of the bark in terms of added value potential, 2) the basic chemical composition of the bark extract and the effect of its pretreatment on the extract composition, 3) the production of rigi…

Inferring Phytoplankton, Terrestrial Plant and Bacteria Bulk δ¹³C Values from Compound Specific Analyses of Lipids and Fatty Acids.

2015

Stable isotope mixing models in aquatic ecology require δ13C values for food web end members such as phytoplankton and bacteria, however it is rarely possible to measure these directly. Hence there is a critical need for improved methods for estimating the δ13C ratios of phytoplankton, bacteria and terrestrial detritus from within mixed seston. We determined the δ13C values of lipids, phospholipids and biomarker fatty acids and used these to calculate isotopic differences compared to the whole-cell δ13C values for eight phytoplankton classes, five bacterial taxa, and three types of terrestrial organic matter (two trees and one grass). The lipid content was higher amongst the phytoplankton (…

Effetti della lunga macerazione post-fermentativa sulla composizione fenolica e microbiologica del vino Aglianico di Taurasi

2011

An Upper Mississippian echinoderm microfauna from the Genicera Formation of northern León (Carboniferous, Cantabrian Mountains, N Spain)

2020

For the first time an echinoderm microfauna is recorded from the cephalopod limestone facies (‘griotte facies’) of the lower Carboniferous (Mississippian) Genicera Fm. (Alba Fm.). The formation is widespread in the Cantabrian Mountains in NW Spain, but the ossicles are from some sections in the surroundings of the Bernesga valley in northern León. They have been derived from insoluble acetic acid residues from samples of the upper and especially of the uppermost part of the formation (Canalón Mb. and Millaró Beds). The microfauna include taxonomically treated wheel-shaped ossicles, sieve-plates and rods of holothurians, goniodonts of ophiocistioids, and ophiuroid and stenuroid skeletal elem…

Electrical conductivity of glass fiber-reinforced plastic with nanomodified matrix for damage diagnostic

2021

The electrical conductivity of glass fiber-reinforced plastic (GFRP) with epoxy matrix modified by multiwall carbon nanotubes (MWCNT) was studied. The electrical conductivity of nanomodified lamina and multi-layered GFRP was investigated on several levels using a structural approach. Components of the electrical conductivity tensor for unidirectional-reinforced monolayer were calculated similarly as in micromechanics using the conductivity of the nanomodified matrix. The electrical conductivity of multilayer composite was calculated using laminate theory and compared with values measured experimentally for various fiber orientation angles. Calculated and experimental data were in good agree…

Physico-Chemical Properties and Use of Waste Biomass-Derived Activated Carbons

2017

Physico-Chemical Properties and Use of Waste Biomass-Derived Activated Carbons

2017

Activated carbons are widely used in different industrial processes for example as adsorbents or as support materials. Advantageously these carbons can be prepared from residual or waste biomass materials. Different raw material type and activation procedure plays an important role in the physico-chemical characteristics of activated carbon e.g. surface area, porosity and pore distribution. In this study, activated carbon has been prepared from lignocellulosic waste materials (e.g. saw dust, lignin residue) and characterized by a number of methods. Further, adsorption properties of carbons were evaluated. Adsorption capacity of dyes and metals was high (methylene blue dye 86 % and zinc meta…

NH4HCO3–water solutions regeneration in RED closed loop applications

2017

Reverse Electrodialysis (RED) in closed loop arrangement (Reverse Electrodialysis Heat Engine - REDHE) is a promising technology to convert low-grade waste heat into electricity. RED is a membrane process exploiting the salinity gradient between a concentrated and a diluted solution to generate electrical current. Due to the transfer phenomena occurring in the RED unit, the two exiting solutions are partially mixed. Thermal regeneration processes can be used to restore the initial conditions of the two solutions, thus closing the loop. In this regard, ammonium hydrogen carbonate (NH4HCO3) salt solutions are suitable for such applications, being able to decompose at temperatures above 40-45 …