Search results for "catalyst"
showing 10 items of 516 documents
Copolymerization of ethylene with norbornene or 1-octene using supported ionic liquid systems
2016
Copolymerization of ethylene with norbornene (E/NB) and ethylene with 1-octene (E/Oct) is performed using supported ionic liquid (SIL) systems, in which metallocene (Cp2VCl2) or post-metallocene [VCl2(salenCl2)] vanadium catalysts are immobilized in pyridinium chloroaluminate ionic liquid supported on silica. The studied SIL catalysts show higher activities as well as stability than their non-supported analogues. In addition, higher activities and better comonomer incorporation are observed for norbornene (above 30 mol%). The comonomer incorporation has considerable influence on copolymer molecular weight (M w), melting temperature, crystallinity degree, and microstructure of the copolymers…
The effect of the comonomer on the copolymerization of ethylene with long chain α-olefins using Ziegler–Natta catalysts supported on MgCl2(THF)2
2000
Abstract The effect of the type of the comonomer (1-pentene, 1-hexene, 1-octene, 1-decene and 1-dodecene) on the copolymerization of ethylene with α-olefin over vanadium (VOCl3 and VCl4) and titanium (TiCl4) catalysts supported on MgCl2(THF)2 and activated by Et2AlCl was studied. The results show that the introduction of a longer α-olefin in the ethylene polymerization feed depresses the catalytic activity of all investigated catalysts. The catalyst activity does not depend on the type of the comonomer applied but changes with the comonomer concentration in the feed. The incorporation of α-olefin in the polymer chain was found to be dependent on the type and concentration of the comonomer i…
Studies on the microstructure of ethylene/1-hexene copolymers prepared over heterogeneous Ziegler - Natta catalysts
2000
Three MgCl 2(THF) 2-supported, AlEt 2Cl-activated VOCl 3, VCl 4 and TiCl 4 Ziegler - Natta catalysts were used to copolymerize ethylene with 1-hexene in the presence of hydrogen to prepare low-M well-soluble copolymers that could be analyzed by 13C-NMR. The spectra (Fig. 1) showed resonance signals due to ethylene and 1-hexene units in positions unaffected by catalyst type and with intensities related to the degree of comonomer incorporation into the copolymer. The triad sequence distribution and comonomer reactivity ratios (r) were calculated by the Randall method [11] and Bernoulli statistics based on the known copolymer composition. The latter appeared to be the more valid in predicting …
2-(N,N-Diethylaminomethyl)-6,7-trihydroquinolinyl-8-ylideneamine-Ni(ii) chlorides: application in ethylene dimerization and trimerization
2020
A series of Ni(II) complexes with the general formula [2-((NEt2)Me)-8-{N(Ar)}C9H8N]NiCl2, where Ar = 2,6-Me2C6H3 in Ni1, 2,6-Et2C6H3 in Ni2, 2,6-i-Pr2C6H3 in Ni3, 2,4,6-Me3C6H2 in Ni4, 2,6-Et2-4-MeC6H2 in Ni5, and 2,4,6-t-Bu3C6H2 in Ni6, has been prepared using a one-pot reaction of 2-(N,N-diethylaminomethyl)-6,7-dihydroquinolin-8(5H)-one with the corresponding aniline and nickel dichloride hexahydrate. The resultant complexes were characterized using elemental analysis and FT-IR spectroscopy, while the mononuclear Ni1 and Ni3 were also the subject of single-crystal X-ray diffraction study. On activation with MMAO, the complexes Ni1–Ni6 displayed good activity in ethylene oligomerization, f…
Polypropylene and poly(ethylene-co-1-octene) effective synthesis with diamine-bis(phenolate) complexes: Effect of complex structure on catalyst activ…
2017
A series of group 4 metal complexes bearing amine-bis(phenolate) ligands with the amino side-arm donor: (μ-O)[Me2N(CH2)2N(CH2-2-O-3,5-tBu2-C6H2)2ZrCl]2 (1a), R2N(CH2)2N(CH2-2-O-3-R1-5-R2-C6H2)2TiCl2 (R = Me, R1, R2 = tBu (2a), R = iPr, R1, R2 = tBu (2b), R = iPr, R1 = tBu, R2 = OMe (2c)), and Me2N(CH2)2N(CH2-2-O-3,5-tBu2-C6H2)(CH2-2-O-C6H4)TiCl2 (2d) are used in ethylene and propylene homopolymerization, and ethylene/1-octene copolymerization. All complexes, upon their activation with Al(iBu)3/Ph3CB(C6F5)4, exhibit reasonable catalytic activity for ethylene homo- and copolymerization giving linear polyethylene with high to ultra-high molecular weight (600·× 103–3600·× 103 g/mol). The activi…
Titanium and vanadium catalysts with oxazoline ligands for ethylene-norbornene (co)polymerization
2018
A series of catalysts, (Py-ox)TiCl4, (Py-box)TiCl4, (Py-ox)VCl3, (Py-box)VCl3, SIL/(Py-ox)VCl3, SIL/(Py-box)VCl3, with 2-(1,3-oxazolin-2-yl)pyridine (Py-ox) and 2,6-bis(1,3-oxazolin-2-yl)pyridine (Py-box) ligands, silica support modified by 1-[3-(triethoxysilyl)propyl]pyridinium ethylchloroaluminate ionic liquid (SIL), activated by AlEt2Cl, AlEtCl2, and methylaluminoxane (MMAO) were studied in ethylene polymerization and ethylene-norbornene copolymerization. Single-crystal X-ray diffraction is given for both Py-ox and Py-box. The complexation was confirmed by NMR and ESI-MS methods. All complexes were found to be active in ethylene polymerization with better performance of the vanadium cata…
Polymerization of ethylene by oxide-supported titanium halide catalyst: kinetic model with a deactivation of active species
2000
Abstract The effect of the calcination temperature of alumina, which was then used as a support for a titanium halide catalyst [TiCl4/Et2AlCl], on the catalyst activity in ethylene polymerization was investigated. α-Al2O3 was found to make a more advantageous catalyst support as compared to γ-Al2O3 despite the fact that the former offered a clearly lower specific surface area and its content of surface OH groups was inferior. The ethylene polymerization in the presence of the catalytic system on different alumina supports was investigated on the basis of a proposed kinetic model, taking into consideration the deactivation of active sites in the process. The improved activity was found to re…
“Functional Poly(ethylene glycol)”: PEG-Based Random Copolymers with 1,2-Diol Side Chains and Terminal Amino Functionality
2010
A series of poly(ethylene glycol-co-isopropylidene glyceryl glycidyl ether) (P(EO-co-IGG)) random copolymers with different fractions of 1,2-isopropylidene glyceryl glycidyl ether (IGG) units was synthesized. After acidic hydrolysis a new type of "functional PEGs", namely poly(ethylene glycol-co-glyceryl glycerol) (P(EO-co-GG)) was obtained. Using an initiator that releases a terminal amino moiety after deprotection, functional end groups with orthogonal reactivity to the in-chain groups were obtained. All polymers showed narrow molecular weight distributions (1.07-1.19), and control of the molecular weights was achieved in the range 5000-30 000 g/mol. Random incorporation of both comonomer…
Homopolymerization of styrenic monomers and their copolymerization with ethylene using group 4 non‐metallocene catalysts
2020
Homopolymerization of styrenic monomers (St, p ‐Me‐St, p ‐t Bu‐St, p ‐t BuO‐St) and their copolymerization with ethylene, with the use of [( t Bu2O2NN′)ZrCl]2(μ‐O) (1 ) and ( t Bu2O2NN′)TiCl2 (2 ), where t Bu2O2NN′ = Me2N(CH2)2N(CH2‐2‐O−‐3,5‐t Bu2‐C6H2)2, is explored in the presence of MMAO and (i Bu)3Al/Ph3CB(C6F5)4. The ethylene/styrenic monomers copolymerization with 1 /MMAO produces exclusively copolymers with high activity and good comonomer incorporation whereas the other catalytic systems yield mixtures of copolymers and homopolymers. The use of p ‐alkyl styrene derivatives instead of styrene raises the catalytic activity, comonomer incorporation and molecular weights of the copolyme…
Isolated Fe(III)-O Sites Catalyze the Hydrogenation of Acetylene in Ethylene Flows under Front-End Industrial Conditions
2018
[EN] The search for simple, earth-abundant, cheap, and nontoxic metal catalysts able to perform industrial hydrogenations is a topic of interest, transversal to many catalytic processes. Here, we show that isolated FeIII¿O sites on solids are able to dissociate and chemoselectively transfer H2 to acetylene in an industrial process. For that, a novel, robust, and highly crystalline metal¿organic framework (MOF), embedding FeIII¿OH2 single sites within its pores, was prepared in multigram scale and used as an efficient catalyst for the hydrogenation of 1% acetylene in ethylene streams under front-end conditions. Cutting-edge X-ray crystallography allowed the resolution of the crystal structur…