Search results for "cavitation"
showing 10 items of 43 documents
Repassivation of the damage generated by cavitation on UNS N08031 in a LiBr solution by means of electrochemical techniques and Confocal Laser Scanni…
2010
Abstract The objective of this work is to study the influence of cavitation on the corrosion behaviour of Alloy 31, a highly-alloyed austenitic stainless steel (UNS N08031), in a LiBr heavy brine solution (992 g/L) at 25 °C. The presence of cavitation shifted the OCP value towards the active direction by 708 mVAg/AgCl, increased anodic current densities and passivation current density, ip, and reduced the pitting potential, Ep. Repassivation behaviour of Alloy 31 has been investigated by using potentiostatic tests at different potentials. The current density transient obtained after interrupting cavitation was used to obtain the repassivation index, n, provided by the slope of the log i(t) …
A new nature of microporous architecture with hierarchical porosity and membrane template via high strain rate collision
2019
Abstract This paper presents the formation of an unusual porous structure at Al/Al interface joined by magnetic pulse welding. The porous structure consists of a hierarchical microporous architecture with pore size of less than 2 µm that represents more than 80% over the whole area, in which 38% of them are sub-micron size pores. It also exhibits ultra-thin wall, sufficiently thin enough to behave as an electron-transparent material with a wall thickness of 50 nm. The formation of this porous structure is attributed to a cavitation process of a molten material in three stages including, (1) nucleation, (2) growth and coalescence and (3) solidification. Further analysis of this cavitation pr…
Cavitation in 3He-4he Liquid Mixtures
2002
Phase transitions under equilibrium conditions are experimentally well determined and take place in the coexistence regime. However, phase transitions do not always occur under equilibrium conditions. As the new phase forms, the free energy of the system is lowered, but the original phase can be held in a metastable state close to the equilibrium transition point. Although they are internally stable, in each case there exists another configuration that has a lower thermodynamical potential. The metastable state is separated from the stable state by a thermodynamic barrier. Due to statistical fluctuations in density or concentration, this barrier can be overcome as the result of the formatio…
Structural-hydraulic test of the liquid metal EURISOL target mock-up
2009
Abstract Structural-hydraulic tests of the European Isotope Separation On-Line (EURISOL) neutron converter target mock-up, named MErcury Target EXperiment 1 (METEX 1), have been conducted by Paul Scherrer Institut (PSI, Switzerland) in cooperation with Institute of Physics of the University of Latvia (IPUL, Latvia). PSI proceeded with extensive thermal-hydraulic and structural computational studies, followed by the target mock-up tests carried out on the mercury loop at IPUL. One of the main goals of the METEX 1 test is to investigate the hydraulic and structural behaviour of the EURISOL target mock-up for various inlet flow conditions (i.e. mass flow rates) and, in particular, for nominal …
Wavelet analysis of experimental results for coupled structural–hydraulic behavior of the EURISOL target mock-up
2009
During test runs of the The European Isotope Separation On-Line (EURISOL) target mock-up performed in December 2008, data were recorded for strain gages and for acceleration sensors. In this paper, the applicability of wavelet analysis for detecting the onset and the status of flow-induced cavitation is investigated for the first time. Even under noisy conditions, the detection of incipient cavitation was possible when combining measurements with data from structural and fluid dynamic simulations. The distribution of coefficients of suitably selected wavelets yields a quantitative measure for the extent of cavitation in the EURISOL target mock-up under representative flow conditions. Withou…
Protective, antioxidant and antiproliferative activity of grapefruit integropectin on sh-sy5y cells
2021
Tested in vitro on SH-SY5Y neuroblastoma cells, grapefruit IntegroPectin is a powerful protective, antioxidant and antiproliferative agent. The strong antioxidant properties of this new citrus pectin, and its ability to preserve mitochondrial membrane potential and morphology, severely impaired in neurodegenerative disorders, make it an attractive therapeutic and preventive agent for the treatment of oxidative stress-associated brain disorders. Similarly, the ability of this pectic polymer rich in RG-I regions, as well as in naringin, linalool, linalool oxide and limonene adsorbed at the outer surface, to inhibit cell proliferation or even kill, at high doses, neoplastic cells may have open…
Toward a density functional description of liquid pH2.
2010
A finite-temperature density functional approach to describe the properties of parahydrogen in the liquid-vapor coexistence region is presented. The first proposed functional is zero-range, where the density-gradient term is adjusted so as to reproduce the surface tension of the liquid-vapor interface at low temperature. The second functional is finite-range and, while it is fitted to reproduce bulk pH2 properties only, it is shown to yield surface properties in good agreement with experiments. These functionals are used to study the surface thickness of the liquid-vapor interface, the wetting transition of parahydrogen on a planar Rb model surface, and homogeneous cavitation in bulk liquid…
Electrostatic interaction of a solute with a continuum. Improved description of the cavity and of the surface cavity bound charge distribution.
1987
Algorithms for a finer description of cavities in continuous media and for a more efficient selection of sampling points on the cavity surface are described. Applications to the evaluation of solute surface and volume and to the calculation of the solute-solvent electrostatic interaction energy, as well as of the cavitation energy are shown as examples.
Cavitation corrosion and repassivation kinetics of titanium in a heavy brine LiBr solution evaluated by using electrochemical techniques and Confocal…
2011
The cavitation corrosion behaviour of commercially pure Grade 2 titanium in a 992 g/l LiBr solution has been investigated at 25 °C using an ultrasound device. Cavitation was found to have more influence on the anodic branch than on the cathodic branch, shifting the corrosion potential, Ecorr, and the OCP value towards more negative potentials, and increasing the corrosion current density, icorr, by six times. The repassivation kinetics of Grade 2 titanium have also been studied in the 992 g/l LiBr solution, at 25 °C and various applied potentials, using cavitation to damage the electrode surface. The repassivation kinetics have been analysed in terms of the current density flowing from the …
Relations between cavitation erosion resistance of materials and their fatigue strength under random loading
1999
Abstract The paper contains results of tests on fatigue strength under uniaxial random loading and cavitation erosion resistance for three steels: 10HNAP, 18G2A and 15G2ANb. The obtained fatigue and cavitation characteristics were used for determination of relations between these two phenomena. From the analysis it appears that there is correlation between fatigue strength of the material under random loading and its cavitation erosion resistance. It has been shown that fatigue tests under random loading and tests on cavitation erosion of 10HNAP, 18G2A and 15G2ANb steels may be described with a mathematical model of the same type. It has been also found that there is a linear relation, in t…